Alphacool GardTube Bending Kit Basix User Manual

We assume no responsibility for any typing errors.

Alphacool International GmbH, Marienberger Strasse 1, 38122 Braunschweig Tel: [phone] Supportmail: [e-mail]

Alphacool GardTube Bending Kit Basix

Before you ll the water circuit with water, it is useful to test if the water circuit you have built up is really ght. Quickly it can
happen that a hose or HardTube was not mounted correctly which can lead to a real annoyance. With the Alphacool Leak Te­sng Tool you can quickly and easily check whether all components are connected correctly before lling.

• Silicone inserts for 10 and 13 mm ID

• Professional deburrer

• Bending tool for 12 to 16 mm HardTubes

• Modding cuer for cung PETG HardTubes

Bending Kit Basic

Alphacool arcle number: 29143

We assume no responsibility for any typing errors.

Alphacool International GmbH, Marienberger Strasse 1, 38122 Braunschweig Tel: [phone] Supportmail: [e-mail]

L x D 100 x 1 cm
Material Silicone
Color Blue

Data Silicon Insert 10 mm

Scope of delivery

1 x Silicone Insert 10 mm

1 x Silicone Insert 13 mm

1 x Bending Tool

Data Deburrer

L x D 41 x 46,3 mm
Material Plascs
Blades Stainless steel

Number of blades 3 x double sided
Deburring of Inner and outer for Acryl and PETG

1 x Deburrer

1 x Eistools Modding Cuer

L x D 100 x 1,3 cm
Material Silicone
Color Blue

Data Silicon Insert 13 mm

Data Bending Tool

L x W x H 178 x 137 x 20 mm

Material Nylon
Blades Stainless steel
Number of blades 12 - 14 and 16 mm OD

Angle 0 - 180°

Modding cuer

L x W x H 178 x 137 x 20 mm
Angle Up to 45°
Suitable for PETG tubes, strands, cables, so materials

Blades Exchangeable

We assume no responsibility for any typing errors.

Alphacool International GmbH, Marienberger Strasse 1, 38122 Braunschweig Tel: [phone] Supportmail: [e-mail]

With the Alphacool HardTube Bending Kit Basic you everything you need to cut, deburr and bend your 10mm and 13mm inner
diameter PETG tubes.

Deburring made easy

Everyone who works with HardTubes knows that they must deburr all ends of the tubes. The classic deburrer from Alphacool

oers the ability to deburr HardTubes inside and outside. The external deburring is extremely important so that the HardTubes
t perfectly and do not damage any O-rings. The inner deburring is only used to remove cung residue. For clean deburring,
the deburrer has three steel blades with sharpened edges. The deburrer ts perfectly in the hand due to its large round shape.

Cung PETG tubes

The Eistools Modding Cuer works like scissors and is ideal for cung PETG HardTube . Please note that acrylic HardTube can­not be cut with this tool as they would shaer when cut. Of course, you can also use it to cut cables and other so compo­nents. If you want to cut angles, the integrated protractor can be used.

Bending tool and silicone inserts

A silicone insert is absolutely necessary for bending HardTubes. The Silicone Insert prevents the tube from collapsing at the
bends. To help the insert glide beer, use a waterbased lubricant or similar. Oil based Lubricant and too much soap should be
avoided and never use alcohol as this can damage plascs such as PETG . With the small but praccal bending tool you can
easily bend simple angles. The tube is pushed into the bending tool, heated with a heat gun and can then be bent very easily.

The only addional items you will need are the HardTubes and a heatgun that can produce low temperatures. With this simple
combinaon you can make the liquid cooled PC of your dreams.

Arcle text

Other data

Cercates CE, FC, RoHS

EAN 4250197291439

Customs code 84651010000

Packaging dimensions 1 unit

L x B x H 29 x 19 x 15,5 cm
Total weight 1 kg

Download Links

Product pics hps://www.alphacool.com/download/1018029_Bending_Tool_Kit_Basic_pics.zip