Alphacool ES Reservoir 2U User Manual

Version: 17.02.2020
We assume no responsibility for any typing errors.
Alphacool International GmbH, Marienberger Strasse 1, 38122 Braunschweig Tel: (+49)0531 288 740 Supportmail: info@alphacool.com
What is it?
Alphacool ES Reservoir 2U
Highlights
- Comes from the Enterprise Solutions series
- Optimized for 2U server racks
- Integrated pump top for DDC pumps
- Extensive mounting options
Version: 17.02.2020
We assume no responsibility for any typing errors.
Alphacool International GmbH, Marienberger Strasse 1, 38122 Braunschweig Tel: (+49)0531 288 740 Supportmail: info@alphacool.com
Technical data
B x T x H 62 x 80 x 60 mm
Net weight 93 g
Max working temperature 60 °C
Threads 11 x G1/4“
Pressure tested 0,8 Bar
For Serverracks 2U, 3U, 4U
Certificates CE, FC, ROHS
Scope of delivery
1pc reservoir
1pc velcro mat
9pc screw plugs
1pc double nipple
10pc M3x5 screws
2pc 3x8 screws
4pc 4Mx20
1pc screw plug tool
2pc holder straight
2pc holder angle
1pc hose holder
Version: 17.02.2020
We assume no responsibility for any typing errors.
Alphacool International GmbH, Marienberger Strasse 1, 38122 Braunschweig Tel: (+49)0531 288 740 Supportmail: info@alphacool.com
Other data
Article number Alphacool 15376
EAN Code 4250197153768
PU Box 1
Dimensions PU B x T x H 16,5 x 22 x 10 cm
Weight 468 g
Customs code 84733080000
Product pics download
http://alphacool.com/ download/1017716_Alphacool_ES_Reservoir_2U_DDC.zip
Article text
The Alphacool ES 2U Reservoir is a development for the Enterprise Solution series. It has an integrated pump top for the powerful DDC pump and offers many connection and mounting options. The combina­tion of all these features provides a perfect solution for 2U server racks and workstations.
Extensive connection options
The ES 2U Reservoir has a total of 10 inputs and one output. All connections use a G1/4" thread. There are 2 inputs on each side and on top. Using the top inputs allows you to fill the reservoir perfectly. One inlet is used to fill in the liquid while the second inlet is used to allow the air to escape during filling. Thanks to the extensive connection possibilities there are various options to position the expansion tank in a server rack.
Mounting Options Directly on the Radiator Ideally, the ES 2U expansion tank is mounted directly on the radiator. For this purpose, three mounting frames and a double nipple fitting are included in the package. The double nipple is used as a direct con­nection with an Alphacool NexXxoX radiator of the X-Flow series. The reservoir is then attached direct­ly to the radiator using the enclosed mounting brackets. The Alphacool NexXxoS X-Flow radiators natu­rally have suitable mounting holes for this. This type of mounting makes it possible to position the radia-
tor and reservoir either next to each other or offset in front of the radiator. The corresponding options
are listed in detail in the instructions.
Further Mounting Options and Pump Installation If the ES 2U reservoir is not to be mounted directly on the radiator, it can of course be fastened to any part of the case using the Velcro sheet provided. In this case, one part of the Velcro fastener is stuck to the bottom of the reservoir and the other part to any place in the server rack.
Manual PDF
http://www.alphacool.com/download/DDC-reservoir_2U_manual.pdf
Version: 17.02.2020
We assume no responsibility for any typing errors.
Alphacool International GmbH, Marienberger Strasse 1, 38122 Braunschweig Tel: (+49)0531 288 740 Supportmail: info@alphacool.com
To install the pump into the pump top only 4 screws and an O-ring are needed. The O-ring is placed on the reservoir, the pump is put on and fixed with four screws. The entire Alphacool ES Reservoir 2U is
then ready for use.
The Alphacool ES 2U Reservoir - DDC version is an extremely compact reservoir especially for 2U serv­er racks with extensive connection and mounting options.
Loading...