U.L. Listed DC Power Supplies
Product Specification Sheet
APS346
Rev. 12 /2013
SS6C 6VDC POWER SUPPLY
The Alpha
Communications® model
SS6C 6VDC plug-in
p o w e r supplies offer
compac t, easy-to- install
low voltage DC
power sources for use with
various Alpha
Communications® intercom systems and related
components.
The SS6C is used mainly with our SM202 and SM202K
series DuoCom™ intercom masters and systems, but
can be used for other applicat ions and syst em.
Primary wire connections are made by simply plugging
the power supply into a standard 2-prong wall outlet;
secondary c onnections are made using pigtails provided.
T he SS6C is U.L. listed and C.S.A. approved, and is for
indoor use only.
120VAC Primary; 6VDC, 700mA Sec ondary
1.38"W (36mm) x 288"H (74mm) x 2.10"D (54mm)
SS12C 12VDC POWER SUPPLY
The Alpha
Communications® model
SS12C 12VDC plug-in
p o w e r supplies offer
compac t, easy-to- install
low voltage regulated
DC power sources for use
with various Alpha
Co mmun ic at i o ns® intercom systems and related
components.
Primary wire connections are made by simply plugging
the power supply into a standard grounded wall outlet;
secondary connect ions are made using two (2) screw
terminals provided. The SS12C is U.L. listed, and is for
indoor use only.
120VAC Primary, 12VDC, 1.2 Amp Secondary
(regulated)
2.63"W (67mm) x 3.75"H (96mm) x 2.38"D
(61mm)
U.L. LIST E D DC P O WER SUPPLIES
Alpha Communications® feat ures a c omplete line of U.L.®
Listed DC Class II power supplies to power their
intercoms, video- intercoms, nurse-call systems, c ameras,
relays and various signalling systems and devices.
The Alpha Communications® model SS12P
1 2 V D C plug-in switching power supplies offer
compac t , easy- to-install low voltage DC power sources
for use with various Alpha Communications® intercom
systems and c ameras and other accessories.
Primary wire connections are made by simply plugging
the power supply into a standard 2-prong wall outlet;
secondary connect ions are made using t he 2.1mm plug-in
connect or provided. The c enter pin on the plug-in
connect or is (+) positive. The SS12P is UL and CUL
recognized, and is for indoor use only.
Because of its flexible input voltage range of 100
t o 240VAC it can be used virtually anywhere in the
world with (with t he appropriate plug adapter).
100 to 240VAC Primary; 12VDC, 500mA Secondary
0.875"W (23mm) x 2.50"H (64mm) x 1.625"D (42mm)
- less c ord and/or plugs
IMP O RT ANT NO T ES
All power supplies shown are for indoor use
only, and are designed for Class II wiring.
Contractor shall observe all local and
national electrical and building codes.
When installing a DC power supply, it is very
important to observe polarity!