Alpha SF156B Specsheet

Product Specification Sheet APS313 - Rev. 08/2013

SF156B Code Call (Code Blue) Station (Non-Supervised)SF156B Code Call (Code Blue) Station (Non-Supervised)

387 CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone] CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone]

Web: www.canalalarm.comWeb: www.canalalarm.com

Copyright © 1998-2 017 Alpha Communication s® - All Righ ts Reserved.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

Architects' And Engineers' SpecificationsArchitects' And Engineers' Specifications

The code call push/pull stations shall be Alpha Communications® /
TekTone SF156B, or approved equal. Operation of emergency
signals shall be ac c omplished by a short pull on the (optional
model CA015K nylon cord or CA016K TPU plastic c ord) or by pulling
/ pushing down on the Blue lever marked 'CODE'.

The Red "CALL PLACED" L.E.D. indicator shall flash to assure the
patient that the call has been placed. Switc hing mec hanism shall
consist of a reliable DPDT switc h. T he SF156B shall be used
in conjunction with a PK153 third priority control unit, to provide a
separate and distinct flash and t one rate. The SF156B is not a

'supervised' code call station.

Unit shall be U.L. Listed 1069, to the latest standards. Contract or
shall observe all local and national electrical and building codes.

SF156B Code Call Pull/Push StationSF156B Code Call Pull/Push Station

The SF156B Code Call Station is used to operate all system code
signals (except 'supervised' code blue applications). It may be
used independently or connect ed with other c all stat ions or
intercom stat ions. All electronic components are mounted on a
circuit board. The SF156B features a built -in Red (flashing) LED.
The SF156B is used primarily with the NC110A, NC110N, NC150N,

NC150R, NC200N and RS800 series nurse/emergency- call systems.

The SF156B is U.L. 1069 listed, to the latest standards.

Due t o the flexibility of its design, it may be used as a PULL CORD
CODE STATION, or a PUSH TYPE CODE CALL STATION. The
optional (model CA015K or CA016K) pull cord may be used for
emergency pull activat ion, or if so desired, the standard LARGE
BLUE push/pull down lever may be used.

FeaturesFeatures

U.L. Listed 1069, to the latest standards
Simple and flexible operation.
RED L.E.D. "Called Placed" indicator (flashing)
Call cancel only at point of origin.
Flame-ret ardant type KJB Cycolac Plastic
Can be used as a PUSH type station or PULL type
(using optional model CA015K or CA016K pull cord
assembly)

SpecificationsSpecifications

Dimensions:

Height: 4.50" (114mm)
Width: 2.81" (72mm)
Depth: 1.63" (41mm)
Projects: 0.69" (17mm) from mounting surface
(including BLUE pull/push down lever).

Construction:

Electronic component s and DPDT switc h, c ircuit
board mounted. Faceplate is made of KJB
Cycolac Plast ic, with t he word 'CODE' imprinted
in White on the station

Connections: Plug-in connec tor wiring harness

Housing:

Steel City #52171 box with Steel City #52C14
plaster ring, or Alpha Communications® Model
#IH358 box with IH357 ring, or EXACT EQUAL.
Vertical mount.