Alpha RY032AE Specsheet

Product Specification Sheet APS617 - Rev. 07/2013

RY032AE 32-Output AlphaEntry™ Signal Relay BoardRY032AE 32-Output AlphaEntry™ Signal Relay Board

Alpha CommunicationsAlpha Communications

42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone] Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]

TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]

Copyright © 1998-2 016 Alpha Communication s® - All Righ ts Reserved.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

Architects' And Engineers'Architects' And Engineers'

SpecificationsSpecifications

The 32-Output Signal Relay Board(s) shall be
Alpha Communicat ions® AlphaEntry™ series

RY032AE or equivalent. Eac h RY032AE board

shall provide 32 output relays, which will be
triggered and time controlled by
the AlphaEntry™ system soft ware. All 32 of t he
relays shall have one (1) 'common' connec tion,
which shall be internally jumped on t he RY032AE
board. Each relay shall be rated for 1A, and shall
be field selectable for NO or NC output contac ts.
Each relay shall have a diagnostic LED which will
remain lighted as long as that relay is
activated. Up to 16 of t he RY032AE boards can
be daisy-chained (using model CT032AEJ jumper
cables), and eac h system shall require a model

KE-PWR5/2A 5VDC, 2A plugin power supply and

a model CT032AE6 serial cable to c onnect t he
first RY032AE board to t he PC's serial
output connector. The RY032AE relay boards
shall surfac e mount right onto t he finished wall
(or wooden mounting board) by means of sc rew
mounting on top of plastic stand-offs (provided).

All wiring to relay shall be low-voltage Class II
wiring, installed as per all federal, state, and
local elec trical and building c odes.

RY032AE AlphaEntry™ 32-Output Signal Relay BoardRY032AE AlphaEntry™ 32-Output Signal Relay Board

The Alpha Communicat ions® RY032AE 32-Output
Signal Relay Boards are used to provide 32 timed relays
to be triggered by our AlphaEntry™ software, running
on a Windows based PC. T he primary use is for an
entry interc om (or video-intercom) system, to replace

a pushbutton type door entry st ation with a PC- based
graphical directory and c alling system. Up to 16 RY032AE boards can be used on
each AlphaEntry™ syst em, for a tot al c apacity of 512 relays. Each relay comes
fac tory set as Normally Open (NO), but c an individually be c hanged to Normally
Closed (NC) by moving a simple jumper adjacent to eac h relay. T he RY032AE boards
are powered from a 5VDC , 2A plug-in power supply (model KE-PWR5/2A). When
jumping from one RY032AE to another, you will require a model CT032AEJ jumper
cable. The first RY032AE board connec ts to the PC using a model CT032AE6
connector cable (as extender c able as required).

Each of the 32 relays have a diagnostic LED that will light as long as the assoc iated
relay is activated.

The RY032AE relay boards are designed to easily surface mount right onto the
finished wall (or wooden mounting board) by means of screw mounting on top of
plastic stand- offs (provided).

Relay c onnections are positive screw terminal type, using barrier type t erminal
connector strips.

FeaturesFeatures

Easily Installs Right on Finished Wall Surfac e
Operates on Safe Low- Voltage Class II Wiring
Provides 32 Timed Relay Outputs from an RS232 signal
Convenient Sc rew Terminal Connect ions

SpecificationsSpecifications

Dimensions:

8.00"W (204mm) x 4.20"H (107mm) x .075"D (20mm)

when in s tal le d ho rizo ntall y ( as s ho wn a b ov e)

Relay Type: 1.0 Amp (@5V) SPDT Relays with protective c overs

Connections: Barrier Type Sc rew T erminal Connectors.

Power Required:

5VDC, 2A (from KE-PWR5/2A plug-in power supply - 1
required per system).