Alpha RC-SZENA Specsheet

Product Specification Sheet APS775 - Rev. 07/2013

RC-SZENA Wall Mount Connector for Szena Monitor (Golmar)RC-SZENA Wall Mount Connector for Szena Monitor (Golmar)

387 CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone] CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone]

Web: www.canalalarm.comWeb: www.canalalarm.com

Copyright © 1998-2 017 Alpha Communication s® - All Righ ts Reserved.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

RC-SZENA

Wall Mount Connector fo r Szena V ideo-intercom Stati on

A ngled side view shown

Architects' And Engineers'Architects' And Engineers'

SpecificationsSpecifications

The Szena Wall Mount Connec tor(s) shall be
Alpha Communicat ions® / Golmar RC-SZENA, or
approved equal. Wall mount connect or(s) shall
mount right onto the surface of t he finished
wall, and shall contain positive (barrier type)
screw terminal connec tors for wiring.

When flush mounting the Szena monitor(s)
cust omer shall also furnish and install the
required model CE-SZENA flush housing (in
addition to t he RC-SZENA connect or).

Contractor shall observe all local and national
elect rical and building codes.

RC-SZENA Wall Mount Connector for Szena Video-intercomRC-SZENA Wall Mount Connector for Szena Video-intercom

StationStation

The Alpha Communicat ions® / Golmar RC-SZENA Szena Wall Mount Connector is
to be used with the Szena apartment video-intercom station units for surface
wall mounting (or flush mounting when used in addition to the CE-SZENA flush back
box).

Made of rugged plastic, t he RC-SZENA feat ures easy wall mounting tabs and positive
(barrier type) screw terminal connec tors.

FeaturesFeatures

Rugged plastic
Adjustable mounting hole tabs
Built-in positive (barrier type) screw terminal c onnectors
Can be Surfac e mounted (or optionally flush mounted using the CE-SZENA flush
back box)

SpecificationsSpecifications

Dimensions:

2.875"W (74mm) 6.375"H (162mm) 0.75"D (20mm) from finished
wall surface

Flush Housing:

Model CE-SZENA. Use in addition to the RC-SZENA c onnector.
OPTIONAL.