Alpha PK601A User Manual

INSTALLA TION GUIDELINES and GENERAL INFORMA TION:

1. See the specific system wiring diagram for the balance of the wiring connections required.

2. All low voltage wiring is #18 A WG, unless otherwise noted.

3. 16V AC input to PK601A (from SS106 or equivalent transformer) must be minimum 30VA.

4. All terminals shown may not be in the exact same order as they appear on the equipment.

5. Observe all local and national electrical and building codes.

TYPICAL WIRING INSTRUCTIONS

FOR PK601A 24VDC Power Supply

42 Central Drive, Farmingdale NY 11735-1202

[phone] Fax: [phone]

TOLL-FREE Technical Line 1-800-666-4800

Email:[e-mail]

being used as a stand-alone power supply , and
powered by16VAC for the SS106 transformer .

Copyright© 2004, Alpha Communications®, All Rights Reserved

A WD094 Rev . 1 (08/04)