Alpha KB170 Specsheet

Product Specification Sheet APS120 - Rev. 07/2013

BF Series Station Connecting CordsBF Series Station Connecting Cords

387 CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone] CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone]

Web: www.canalalarm.comWeb: www.canalalarm.com

Copyright © 1998-2 017 Alpha Communication s® - All Righ ts Reserved.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

BF Series Station Connecting CordsBF Series Station Connecting Cords

Typical STRAIGHT Cord

Typical COILED Cord

BF Series Station Connecting CordsBF Series Station Connecting Cords

The Alpha Communicat ions® 'BF' series station c onnecting cords
are used with many 'AA' (master) and 'AB' (remote) series intercom
stat ions.

These cords are designed to plug into t he intercom station(s) and
then plug into the flush or surface wall jack(s), where they are
hard-wired to t he system wiring.

The various models are available in different lengths and in
'straight' or 'coiled' configurations, to meet your individual
requirements. All models have plug-in connec tors on both ends.

Models / TypesModels / Types

BF640*: 6' Straight Cord--8 Pin--Beige
BF640A*: 6' Straight Cord--8 Pin-- Black
BF641*: 20' Straight Cord--8 Pin--Beige
BF641A*: 20' Straight Cord--8 Pin--Black
BF642*: 7' Coiled Cord--8 Pin--Beige
BF642A*: 7' Coiled Cord--8 Pin-- Black
BF643*: 1' Coiled Cord--8 Pin--Beige
BF643A*: 1' Coiled Cord--8 Pin-- Black
BF923**: 6' Straight Cord-- 4 Pin-- Black
BF923A**: 20' Straight Cord-- 4 Pin-- Black
BF926**: 7' Coiled Cord-- 4 Pin-- Black
BF940**: 6' Straight Cord-- 6 Pin-- Black
BF940A**: 20' Straight Cord-- 6 Pin-- Black
BF941**: 7' Coiled Cord-- 6 Pin-- Black

* Requires KB170 (fl ush) or KB171 (surfac e) wal l j ack

** Requires KB157P (flus h) wall jac k

Architects' And Engineers' SpecificationsArchitects' And Engineers' Specifications

The intercom station connec ting c ord(s) shall be Alpha
Communications® 'BF' series or approved equal. Cord(s) shall be
selected depending upon model of intercom master and/or
remote st ation(s) and length/type desired for that location.
Cord(s) shall have plug-in connec tors on both ends and shall
connect to the appropriate wall mount plate/jack.

Contractor shall observe all local and national electrical and
building codes.