Alpha FA-PLUS-C Specsheet

Product Specification Sheet APS741 - Rev. 07/2013

FA-PLUS/C Golmar System Power Supply UnitFA-PLUS/C Golmar System Power Supply Unit

387 CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone] CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone]

Web: www.canalalarm.comWeb: www.canalalarm.com

Copyright © 1998-2 017 Alpha Communication s® - All Righ ts Reserved.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

Architects' And Engineers'Architects' And Engineers'

SpecificationsSpecifications

The power supply unit(s) shall be Alpha
Communications® / Golmar model FA- PLUS/C, or
approved equal. The FA-PLUS/C shall be built
into a rugged high impact ABS plastic c ase, and
shall be powered by a standard 110VAC
elect rical outlet. Contractor shall furnish the
proper number of FA-PLUS/C units, depending
upon system capacity.

Low voltage wiring shall be used and positive
screw terminal connec tors shall be provided for
installation wiring. The FA-PLUS/C shall be
mountable right to the surfac e of the wall or in a
cust omer-supplied junction box cabinet.

Contractor shall observe all local and national
elect rical and building codes.

FA-PLUS/C Power Supply UnitFA-PLUS/C Power Supply Unit

The Alpha Communications® / Golmar FA- PLUS/C power supply unit is used only
with the PLATEA and/or SZENA series interc om and/or video-intercom systems. The

FA-PLUS/C provides the intelligent circuitry needed to c ontrol the video-interc om

system functions.

Each FA-PLUS/C gets its power from a standard 110VAC plug-in electrical
connection. All FA-PLUS/C field connect ions are positive screw terminal type, or
plug-in type.

Each PLATEA and/or SZENA series syst em requires a minimum of one F A-PLUS/C
power supply unit.

FeaturesFeatures

Easily Installs Right on Finished Wall Surfac e or in Optional Junct ion Box
Operates on Safe Low- Voltage Class II Wiring
Positive Sc rew T erminal Connectors

SpecificationsSpecifications

Dimensions:

Height: 3.55" (91mm)
Width: 4.22" (108mm)
Depth: 2.45" (63mm) from mounting surface

Construction: High impac t Grey ABS plastic c ase

Connections: Positive sc rew terminal connectors

Mounting:

Surface- mounted (usually installed near the syst em amplifier/power
supply and other system central equipment).