Alpha D-CAM-GB2 Specsheet

Product Specification Sheet APS992 - Rev. 05/2016

D- CAM-GB2 Camera Adder Module for GB2 SystemD- CAM-GB2 Camera Adder Module for GB2 System

387 CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone] CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone]

Web: www.canalalarm.comWeb: www.canalalarm.com

Copyright © 1998-2 017 Alpha Communication s® - All Righ ts Reserved.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

Architects' And Engineers'Architects' And Engineers'

SpecificationsSpecifications

The GB2 series four (4) camera add-on
module(s) shall be Alpha Communications® /
Golmar D-CAM- GB2, or approved equal. The D-

CAM-GB2 shall be used t o add up t o two (2) of

the CAM- GB2 external cameras and up to two
(2) of t he AHD-2812BA external cameras on a

GB2 series system.

Contractor shall observe all local and national
elect rical and building codes.

D- CAM-GB2 Camera Adder Module for GB2 SystemD- CAM-GB2 Camera Adder Module for GB2 System

The Alpha Communicat ions® / Golmar D-CAM-GB2 Four (4) Camera Add-on Module is
used exclusively with t he GB2 series systems. The D-CAM-GB2 allows up to two (2)
of t he 2-wire CAM-GB2 external cameras and up to two (2) of t he c oax type AHD-

2812BA external cameras.

In a GB2 system, you only need a single D- CAM- GB2 for all users, thus reducing the
overall system cost. No additional power supply is required for t he D-CAM-GB2 unit.

FeaturesFeatures

Only one (1) D-CAM-GB2 required per GB2 syst em to add up to four (4)
external cameras
Uses simple coax wiring for AHD- 2812BA cameras (MAX. 2)
Uses simple 2-c onduct or non-polarized (loop) wiring for CAM-GB2 c ameras
(MAX. 2)

SpecificationsSpecifications

Dimensions: 2.84"W (73mm) x 3.95"H (101mm) x 2.37"D (61mm).

GB2 Wiring InformationGB2 Wiring Information

The GB2's system uses simple 2- conductor non-polarized wiring making it ideal for
new installations as well as for retrofit applications. All audio, video and dat a
funct ions are fully digital and using the RAP-2150 (or equivalent) cable you can run
up to 300 meters from the entrance panel to the furthest monitor.