Alpha BF640, BF640A, BF641, BF641A, BF642A Specsheet
...
Product Specification Sheet A PS120 - Rev. 07/2013
BF Series Station Connecting Cords
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: AlphaCommunications.com • Email: info@alphacommunications.com
Copyright© 1998-201 4 Alpha Communications® - All Rights Reserved.
Due to co ntinuous pro duct improvement, all colo rs, sizes, materials, finishes and specification s are subject to ch ange without n otice.
< Previous (APS119) Next (APS121) >
BF Series Station Connecting Cords
Typical STRAIGHT Cord
Typical COILED Cord
BF Series Station Connecting Cords
The Alpha Communicat ions® 'BF' series st ation c onnecting cords
are used with many 'AA' (master) and 'AB' (remote) series interc om
stat ions.
These cords are designed to plug into the intercom station(s) and
then plug into the flush or surface wall jack(s), where they are
hard-wired to t he system wiring.
The various models are available in different lengths and in
'straight' or 'coiled' configurations, to meet your individual
requirements. All models have plug-in connec tors on both ends.
Models / Types
BF640*: 6' Straight Cord--8 Pin--Beige
BF640A*: 6' Straight Cord--8 Pin--Black
BF641*: 20' St raight Cord--8 Pin--Beige
BF641A*: 20' St raight Cord--8 Pin--Black
BF642*: 7' Coiled Cord-- 8 Pin-- Beige
BF642A*: 7' Coiled Cord-- 8 Pin-- Blac k
BF643*: 1' Coiled Cord-- 8 Pin-- Beige
BF643A*: 1' Coiled Cord-- 8 Pin-- Blac k
BF923** : 6' Straight Cord-- 4 Pin-- Black
BF923A** : 20' Straight Cord-- 4 Pin-- Blac k
BF926** : 7' Coiled Cord--4 Pin--Black
BF940** : 6' Straight Cord-- 6 Pin-- Black
BF940A** : 20' Straight Cord-- 6 Pin-- Blac k
BF941** : 7' Coiled Cord--6 Pin--Black
* Requires KB170 (fl ush) or KB171 (surface) wal l ja ck
** Requires KB157P (flush) wa ll j ack
Architects' And Engineers' Specifications
The intercom st ation connecting cord(s) shall be Alpha
Communications® 'BF' series or approved equal. Cord(s) shall be
selected depending upon model of interc om master and/or
remot e st ation(s) and length/type desired for that locat ion.
Cord(s) shall have plug-in connec tors on bot h ends and shall
connect to the appropriate wall mount plate/jack.
Contract or shall observe all local and national electrical and
building codes.
Loading...