ALPHA AS006M2-93 Datasheet
Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email sales@alphaind.com • www.alphaind.com 1
Specifications subject to change without notice. 2/00A
GaAs IC SPDT Switch
Non-Reflective DC–6 GHz
Features
■ Low DC Power Consumption
■ High Isolation, Non-Reflective
■ Broadband DC–6 GHz
■ Excellent Intermodulation Products
■ Small Low Cost “Chip on Board” Package
-93
AS006M2-93
Description
The AS006M2-93 is an IC FET SPDT switch in a low cost
“chip on board” package. It features non-reflective
matching at each output, broadband performance, with
very low DC power consumption.This switch can be used
in many analog and digital wireless communication
systems.
Parameter
1
Frequency
4
Min. Typ. Max. Unit
Insertion Loss
2
DC–1.0 GHz 0.7 0.8 dB
DC–2.0 GHz 1.0 1.2 dB
DC–4.0 GHz 1.4 1.6 dB
DC–6.0 GHz 1.8 2.0 dB
Isolation DC–1.0 GHz 48 58 dB
DC–2.0 GHz 42 50 dB
DC–4.0 GHz 36 42 dB
DC–6.0 GHz 26 35 dB
VSWR (I/O) DC–1.0 GHz 1.3:1 1.4:1
DC–2.0 GHz 1.4:1 1.6:1
DC–4.0 GHz 1.6:1 1.8:1
DC–6.0 GHz 1.8:1 2.0:1
Electrical Specifications at 25°C
0.056
0.000
0.000
0.140
0.160
0.020
0.060
0.100
0.140
Parameter Condition Frequency Min. Typ. Max. Unit
Switching Characteristics Rise, Fall (10/90% or 90/10% RF) 3 ns
On, Off (50% CTL to 90/10% RF) 6 ns
Video Feedthru
3
15 mV
Input Power for 1 dB Compression 0.50–6 GHz 24 dBm
0.05 GHz 16 dBm
Intermodulation Intercept Point (IP3) For Two-tone Input Power 13 dBm 0.50–6 GHz 46 dBm
Control Voltages V
Low
= 0 to -0.2 V @ 20 µA Max.
V
High
= -5 V @ 50 µA to -8 V @ 200 µA Max.
Operating Characteristics at 25°C
1. All measurements made in a 50 Ω system, unless otherwise specified.
2. Insertion loss changes by 0.003 dB/°C.
3. Video feedthru measured with 1 ns risetime pulse and 500 MHz bandwidth.
4. DC = 300 kHz.
Top View
GaAs IC SPDT Switch Non-Reflective DC–6 GHz AS006M2-93
2 Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email sales@alphaind.com • www.alphaind.com
Specifications subject to change without notice. 2/00A
01
Frequency (GHz)
45623
0.0
0.5
1.0
1.5
2.0
2.5
Insertion Loss vs. Frequency
Insertion Loss (dB)
0
10
20
30
40
50
60
70
01 45623
Frequency (GHz)
Isolation vs. Frequency
Isolation (dB)
Typical Performance Data
Pin Out
GND
V
1
GND
J
3
V
2
J
1
J
2
GND
50
50
V
1
V
2
J1–J
2
J1–J
3
-5 0 Insertion Loss Isolation
0 -5 Isolation Insertion Loss
Truth Table
-93
0.000
0.010
0.030
0.130
0.150
0.160
0.140
0.000
0.038
0.102
0.140
0.020
0.110
0.090
0.070
0.050
0.048
0.112
0.020
0.121
Glass
Pt/Pd/Au
Characteristic Value
RF Input Power (RF In) 2 W Max. > 500 MHz
0/-8 V Control
Control Voltage (VC) -0.2 V, -10 V
Operating Temperature (TOP) -40°C to +90°C
Storage Temperature (TST) -65°C to +150°C
Thermal Resistance (ΘJC)25°C/W
Absolute Maximum Ratings
The “chip on board” package is a ceramic leadless chip carrier with a ceramic
lid, which allows for automatic pick and place.The external terminals and
backside ground plane are Pt/Pd/Au, which is highly leach resistant and very
tolerant to variations in solder conditions. The glass fingers between contacts
prevent the possibility of shorted terminals. The recommended solder
attachment is a SN6337 (Pb/SN).
Bottom View
Loading...