Alpha APG1T, APG1W, APG2B, APG2T, APG2W Specsheet

Product Specification Sheet A PS523 - Rev. 07/2013

APG Series Surface Housings (For modular door stations)

42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]

TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]

Copyright© 1998-201 4 Alpha Communications® - All Rights Reserved.

Due to co ntinuous pro duct improvement, all colo rs, sizes, materials, finishes and specification s are subject to ch ange without n otice.

< Previous (APS522) Next (APS524) >

A PG1T (Titanium-shown)

A PG6/2W (White- shown)

APG Series Surface Housings for Modular Series Door

Stations

The APG surfac e housings are designed to be used with the Alpha
Communications® / S.T.R.™ modular series door entry stat ions and
system annunciators. There are seven (7) c onfigurations available
in single and double-width varieties.The APG housings are designed
to be used in conjunction with t he MT series Modular Frame(s). For
larger c onfigurations, multiple APG housings and MT frames may be
mounted alongside eac h other. T he APG surface housings are
available in t hree (3) finishes to matc h the MT frame finishes;
Titanium (suffix-T), White (suffix-W) or Brown (suffix-B).

The APG housings have built-in stand-offs to allow mounting of t he
individual modular snap-in c omponent's PC boards, for easy and
neat system wiring.

See c hart below for reference of sizes/types and configurations
available.

CONFIGURATIONS AVAILABLE

Model# # of Modules Height Width Depth**

APG1* 1W x 1H 5.67" 5.12" 1.00"

APG2* 1W x 2H 9.60" 5.12" 1.00"

APG3* 1W x 3H 13.55" 5.12" 1.00"

APG4* 1W x 4H 17.50" 5.12" 1.00"

APG4/2* 2W x 2H 9.60" 9.06" 1.00"

APG6/2* 2W x 3H 13.55" 9.06" 1.00"

APG8/2* 2W x 4H 17.50" 9.06" 1.00"

*Titanium (suffix-T), White (suffix-W) or Brown (suffix- B).

**Depth indicates size from front to bac k of frame only, not
including the APG series housing and/or snap-in module(s)
included.

Architects' And Engineers' Specifications

Surface housing(s) shall be Alpha Communicat ions® / S.T.R.™ APG series or approved equal. Surface housing(s) shall be modular t ype and
shall be used in conjunct ion with the proper MT series modular panel frame(s). The APG housing(s) shall contain built-in stand-offs t o to
allow mounting of the individual modular snap-in component's PC boards, for easy and neat system wiring.

APG housing(s) shall be made of durable cast aluminum and shall be finished in Titanium (suffix-T), White (suffix-W) or Brown (suffix-B), and

shall surfac e mount onto the finished wall.

Contract or shall observe all local and national electrical and building codes.