Alpha APG1B Specsheet

Product Specification Sheet APS523 - Rev. 07/2013

APG Series Surface Housings (For modular door stations)APG Series Surface Housings (For modular door stations)

387 CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone] CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone]

Web: www.canalalarm.comWeb: www.canalalarm.com

Copyright © 1998-2 017 Alpha Communication s® - All Righ ts Reserved.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

A PG1T (Titanium -shown)

A PG6/2W (White -shown)

APG Series Surface Housings for Modular SeriesAPG Series Surface Housings for Modular Series

Door StationsDoor Stations

The APG surfac e housings are designed to be used with the Alpha
Communications® / S.T.R.™ modular series door entry stations
and syst em annunciators. There are seven (7) configurations
available in single and double-width varieties.The APG housings are
designed to be used in conjunction with t he MT series Modular
Frame(s). For larger c onfigurations, multiple APG housings and MT
frames may be mounted alongside eac h other. The APG surfac e
housings are available in three (3) finishes t o match the MT frame
finishes; Titanium (suffix-T ), White (suffix-W) or Brown (suffix-B).

The APG housings have built-in stand-offs to allow mounting of the
individual modular snap-in component's PC boards, for easy and
neat system wiring.

See c hart below for reference of sizes/types and configurations
available.

CONFIGURATIONS AVAILABLECONFIGURATIONS AVAILABLE

Model# # of Modules Height Width Depth**

APG1* 1W x 1H 5.67" 5.12" 1.00"

APG2* 1W x 2H 9.60" 5.12" 1.00"

APG3* 1W x 3H 13.55" 5.12" 1.00"

APG4* 1W x 4H 17.50" 5.12" 1.00"

APG4/2* 2W x 2H 9.60" 9.06" 1.00"

APG6/2* 2W x 3H 13.55" 9.06" 1.00"

APG8/2* 2W x 4H 17.50" 9.06" 1.00"

*Titanium (suffix-T), White (suffix-W) or Brown (suffix-B).

**Depth indicat es size from front to bac k of frame only, not
including the APG series housing and/or snap-in module(s)
included.

Architects' And Engineers' SpecificationsArchitects' And Engineers' Specifications

Surface housing(s) shall be Alpha Communications® / S.T.R.™ APG series or approved equal. Surfac e housing(s) shall be modular type and
shall be used in conjunct ion with the proper MT series modular panel frame(s). The APG housing(s) shall contain built- in stand-offs to to
allow mounting of the individual modular snap-in component's PC boards, for easy and neat syst em wiring.

APG housing(s) shall be made of durable c ast aluminum and shall be finished in Titanium (suffix-T), White (suffix-W) or Brown (suffix-B), and

shall surfac e mount onto the finished wall.

Contractor shall observe all local and national electrical and building codes.