Alpha AM612-04S Specsheet

Product Specification Sheet A PS152 - Rev. 07/2013

AM612 Apartment Intercom System Speaker Entrance Panels

42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]

TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]

Copyright© 1998-201 4 Alpha Communications® - All Rights Reserved.

Due to co ntinuous pro duct improvement, all colo rs, sizes, materials, finishes and specification s are subject to ch ange without n otice.

< Previous (APS151) Next (APS153) >

Model A M612/08

Architects' And Engineers'

Specifications

The entrance panel shall be Alpha
Communications® / TekTone® AM612 or
approved equal, and shall provide for up
to 16 push buttons per speaker panel.
The panel shall include a weather­resistant mylar speaker mounted behind a
BLACK flame retardant polycarbonate
plastic grill. Push button switc hes shall be
individually replaceable type with self
wiping c ontac ts. In addition, the
panel shall c ontain up to 16 individual
name holders. The name holders shall be
made of BLACK flame retardant
polycarbonate plastic strips to protect
card inserts. Each name holder shall snap
into two small slots on the panel
itself and shall be individually replaceable.

The AM612 shall have t op and bottom
decorative end c aps that shall also serve
as mounting brackets to flush mount to
Alpha Communications® OH600 or OH601
back boxes. The dec orative end caps
shall be made of BLACK flame retardant
polycarbonate plastic. AM612
panels (with suffix 'S") are fully surface
mount t ypes and do not require any
housings or back boxes.

Each AM612 Panel, or approved equal,
shall be supplied with name card sheets
that may be easily separated
into individual name st rips. Name strips
shall be inserted into name holders
without the use of tools. Contractor
shall provide a model S1 screwdriver for
panel maintenance.

Model A M612/16

AM612 Series Apartment Intercom System Speaker Entrance Panel

The AM612 Series entrance panel is for use with Alpha Communications®
loudspeaker type suite stat ions.

They are our most ec onomical entrance panel stat ions. Panels are equipped
with a weather resistant mylar speaker protec ted by a BLACK flame
retardant polyc arbonate plastic grill. All of t he AM612 series panels are
available in a flush or surface style (add suffix 'S').

The anodized aluminum panel is available in two sizes. T he 5.00" x 11.50"
panel acc ommodates from 2 to 8 push butt ons, and t he 5.00" x 17.25"
panel is used for applications requiring from 10 to 16 push buttons, or for
smaller panels with built-in postal release switc h (add suffix 'P').

The speaker panel c an ac commodate up to 16 push buttons. In addition,
the panel also contains up to 16 name holders made of BLACK flame
retardant polyc arbonate plastic with clear flame retardant polycarbonate
plastic strips that snap easily into the panel and are individually replaceable.

Features

Hands- free loudspeaking
Weather-resistant mylar speaker
Self-wiping push button switc hes
Dec orative end caps (BLACK flame retardant polyc arbonate plastic)
Individually replaceable name holders (BLACK flame retardant polyc arbonate switches)
Slim-line surfac e- mount opt ion
Simple installation

Specifications

Dimensions:

Height: 11.50" (292mm) or 17.25" (439mm)

(d ep e nd ing u po n n um ber of bu tto ns )

Width: 5.00" (127mm)

NOTE: All 17.25"H mod els manuf actur ed bef ore 03/10/2011 were 19. 00"H

(483mm).

Push Buttons: Individually replaceable type with self wiping contac ts.

Speaker: 2.50" (64mm) voic e frequency response

Construction: Anodized extruded aluminum panel

Flush Housings:

OH600 Flush Back box for 11.50"H panel OH601 Flush Bac k box for

17.25"H panel For surface panels add the suffix 'S' to the model
number. Surfac e panels are open in the bac k and do not require any
back box or housing.

Tool Required: Model S1 Scrulox (Roberts head) screwdriver