Alpha 232SE, 232SE User Manual

Product Specification Sheet APS287 - Rev. 07/2013

232SE Vandal-Resistant Keypad Station (Surface Mount)232SE Vandal-Resistant Keypad Station (Surface Mount)

42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone] Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]

TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]

Copyright © 1998-2 017 Alpha Communication s® - All Righ ts Reserved.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

Architects' And Engineers'Architects' And Engineers'

SpecificationsSpecifications

The acc ess control system shall be Alpha
Communications® / IEI model 232SE
keypad or approved equivalent. The
keypad memory shall have
nonvolatile EEPROM memory for up to 64
users and is upgradable t o 120. Codes may
be from 1-6 digits in length and digits may
be repeated.

Assisted by the door position sensor input,
this 1 amp Form-C relay shall energize if
the door is opened without a valid user
entry or egress input. This output c an
be programmed to energize for up to 15
minutes or latc h. It can be reset by a valid
code entry.

The systems propped door relay can be
programmed for a 1 to 15 minute time
window in which the door may be held
open aft er a valid entry. The system shall
alert the resident to any "propped" door by
energizing a 1 amp Form 'C' relay. This
output may be wired to a siren, buzzer,
guard station, camera or any other device.

The lock release relay shall be rated at 8
amps and shall be tough enough to handle
any locking device. Simple programming
allows the output t o t oggle (by c ode)
or time from 1 to 90 sec onds.

232SE Surface Keypad Vandal-Resistant232SE Surface Keypad Vandal-Resistant

The 232SE keypad offers field proven reliability and cost effec tive solutions for residential,
commercial and industrial installations, elegant yet durable, it blends with any
decor. Designed for c ompatibility with any elect ric locking device. The keypad ac cept
power from any 12-24V AC/DC supply. No separate programmer is ever nec essary.

FeaturesFeatures

Lock release relay
Lock release t imer
Forced door alarm relay and Propped door alarm relay
Alarm zone shunting relay
Timed egress input
120 user capac ity (with upgrade)
Front Programming
Weather-Resistant self-c ontained metal housing
Vandal-Resistant
Cast metal housing suitable for wall, post or goosenec k mounting. Available in White
or Black (suffix 'BL')

Mechanical SpecificationsMechanical Specifications

Dimensions:

(R e ad e r)

Height: 4.50" (114.3mm)
Width: 3.00" (77mm)
Depth: 1.55" (39.4mm)

Dimensions:

(P rog ra m m ing Ke ypad )

Height: 4.50" (114.3mm)
Width: 2.75" (69.9mm)
Depth: 2.50" (63.5mm)

Electrical SpecificationsElectrical Specifications

Voltage:

12 to 24 volts AC or DC (selec ted by jumper)

(No rma lly us e d with m ode l SS10 6 pi gta il o r m od e l T 1 24 0 plu g- in tra ns fo rm e r)

Current:

@12VDC 20mA typical, 50mA worst c ase
@24VDC 25mA typical, 70mA worst c ase

Note:

Keypads using additional relays require an additional 15mA for eac h
relay energized.

Outputs:

Main relay: 8 Amp, Form 'C' @24VDC-10 Amp surge
Alarm Zone Shunting Relay: 1 Amp, Form 'C' @24VDC
Forced Door Relay: 1 Amp, Form 'C' @24VDC
Propped Door Relay: 1 Amp, Form 'C' @24VDC

Wire Distance: 250' between reader and elec tronics with #22AWG

Environmental SpecificationsEnvironmental Specifications

Temperature: -20°F to 130°F (- 28°C to 54°C)