Alpha 232I Specsheet

Product Specification Sheet APS285 - Rev. 07/2013

232I Indoor Keypad Station (Flush Mount)232I Indoor Keypad Station (Flush Mount)

Alpha CommunicationsAlpha Communications

42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone] Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]

TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]

Copyright © 1998-2 016 Alpha Communication s® - All Righ ts Reserved.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

Architects' And Engineers'Architects' And Engineers'

SpecificationsSpecifications

The acc ess control system shall be Alpha
Communications®/IEI model 232I keypad
or approved equivalent. The keypad
memory shall have nonvolatile
EEPROM memory for up to 120 users.
Codes may be from 1-6 digits in length
and digits may be repeated.

Assisted by the door position sensor
input, this 1 amp Form-'C' relay shall
energize if the door is opened without a
valid user entry or egress input. T his
output can be programmed to energize for
up to 15 minutes or latch. It can be reset
by a valid c ode ent ry.

The systems propped door relay can be
programmed for a 1 to 15 minute time
window in which the door may be held
open aft er a valid entry. The system shall
alert the resident to any "propped" door
by energizing a 1 amp Form 'C' relay. T his
output may be wired to a siren, buzzer,
guard station, camera or any other
device.

The lock release relay is rated a 8 amps
and is tough enough to handle any locking
device. Simple programming allows the
output to toggle (by c ode) or time from 1
to 90 seconds.

232I Flush Mount Indoor Keypad232I Flush Mount Indoor Keypad

The 232I keypad offers field proven reliability and cost effec tive solutions for residential,
commercial and industrial installations, elegant yet durable, it blends with any dec or.
Designed for c ompatibility with any elect ric locking device. The keypad ac cept power from
any 12-24V AC/DC supply. No separate programmer is ever necessary.

FeaturesFeatures

Lock release relay
Lock release t imer
Forced door alarm relay and Propped door alarm relay
Alarm zone shunting relay
Timed egress input
120 user capac ity
Front Programming
Flush mount Indoor Design

Mechanical SpecificationsMechanical Specifications

Dimensions:

(R e ad e r)

Height: 4.50" (114.3mm)
Width: 1.75" (44.4mm)
Depth: 1.55" (39.4mm)

Dimensions:

(P rog ra m m ing Ke ypad )

Height: 4.50" (114.3mm)
Width: 2.75" (69.9mm)
Depth: 2.50" (63.5mm)

Electrical SpecificationsElectrical Specifications

Voltage:

12 to 24 volts AC or DC (selected by jumper)

(No rma lly us e d with m ode l SS10 6 pi gta il o r m od e l T 1 24 0 plu g- in tra ns fo rm e r)

Current:

@12VDC 20mA typical, 50mA worst c ase
@24VDC 25mA typical, 70mA worst c ase

Note:

Keypads using additional relays require an additional 15mA for eac h
relay energized.

Outputs:

Main relay: 8 Amp, Form 'C' @24VDC-10 Amp surge
Alarm Zone Shunting Relay: 1 Amp, Form 'C' @24VDC
Forced Door Relay: 1 Amp, Form 'C' @24VDC
Propped Door Relay: 1 Amp, Form 'C' @24VDC

Wire Distance: 250' between reader and elec tronics with #22AWG

Environmental SpecificationsEnvironmental Specifications

Temperature: -20°F to 130°F (- 28°C to 54°C)