User Manual
3
Step I: Register Your Product
You must register your product to activate the 1-year warranty. It’s quick and easy.
Most return policies only allow for a defective product to be returned within 14 – 30 days after the date of
purchase… and most issues that happen due to defects in material and workmanship have a knack of
happening after this return period has ended. We have seen the sad-puppy look on customers’ faces for
too long and understand how upsetting it is to spend your hard-earned dollars on something that stops
working after a few weeks! That’s why Alpatronix’s Ironclad Warranty will protect you for a whole
year against all defects in material and/or workmanship. So register your product at
www.alpatronix.com/register to activate your warranty and rest easy that you are covered no matter what
the return policy is where you purchased your product!
If you have a defective product and need us to take care of you, email us at support@alpatronix.com and
rest assured that our support team will make this a quick and easy process with as little pain as possible.
Step II: Fully charge your headset
Make sure your device is fully charged using the mini USB charging cable included. This headset has a
rechargeable battery.
Important: For first-time charging, please make sure to charge the battery for at least 4 hours, even if
the charging indicator light shows a full charge. All consecutive charges will take about 1 hour. When
charging, the red indicator light will turn on. This light will turn blue after a full charge. A fully
charged battery will allow up to 5 hours of continuous operation.
Note: The minimum charging time for a headset with dead battery is 40mins. Shorter charging time is
not recommended, as it may interrupt optimum operation. When connecting a device with completely
empty battery to a charger, it may take a while for the LED indicator to indicate charging.