AllVision HD 2000 DS User manual
HD 2000 DS
User manual
Content
Safety instructions .............................................................................................................. 03
1. Referenz
1.1 General Features .......................................................................................................... 04
1.2 Delivery .............................................................................................................................. 04
2. Names and key assignment
2.1 Front view ........................................................................................................................ 05
2.2 Rear view .......................................................................................................................... 05
2.3 Remote control ............................................................................................................. 06
3. Connecting the set-top box
3.1 Connecting the set-top box ................................................................................. 07
4. Main Menu
4.1 Channel list ...................................................................................................................... 08
4.2 Installation ....................................................................................................................... 10
4.3 System ................................................................................................................................ 14
4.4 Accessories ...................................................................................................................... 16
4.5 Media Center .................................................................................................................. 17
5. Additional Information
5.1 Troubleshooting ........................................................................................................... 20
5.2 Specifications ................................................................................................................. 21
5.3 Declaration of Conformity ..................................................................................... 22
02 ENGLISH
Safety instructions
Please read the manual thoroughly before operating the equipment. In case of incorrect
or improper handling, the warranty becomes void.
Power supply: Before start please check the correct operation voltage of the
power point. The operating voltage of this device is 12 V DC, 1 A
AC 100~240 V, 50/60Hz.
Overload: Do not overload a wall outlet, extension cord or adapter, neither
use damaged power cord or touch it with wet hand as this may
result in electric shock.
Liquid: The device shall not be exposed to dripping or splashing water,
and that no objects filled with liquids, such as base, shall be
placed on the apparatus.
Ventilation: Keep the slots on top of the receiver uncover to allow sufficient
airflow to the unit. Do not expose the receiver to direct light or
do not place it near a heater or in humid conditions. Do no
stack other electronic equipments on top of the receiver.
Risk of suocation: Do not let children play with films or other packaging
components, there is a risk of suffocation.
Cleaning: Plug out the receiver from the wall outlet before cleaning. Clean
the receiver by a soft cloth or mild solution of washing-up liquid
(no solvents).
Location: Put the receiver indoor in order to avoid lightening, raining or
sunlight.
Uncover: Do not remove the cover, to reduce the risk of electric shock.
Contact qualified and licensed service personnel to repair the
receiver, or contact your dealer.
ENGLISH
03
1. Referenz
1.1 General Features
• DVB-S / DVB-S2 Satellite Compliant
• DiSEqC 1.0, 1.1, 1.2, USALS
• 4-digit display
• SCPC & MCPC support receivable from C / Ku-Band Satellites LNB
• Universal, Single, Single S & C Band LNB High
• Unicable support (EN50494)
• Sensitive Tuner
• PAL / NTSC conversion
• Variable aspect ratio (4: 3, 16: 9) with Pan Vector or Letter Box
• Resolution: 576p & 576i, 720p, 1080i & 1080p
• HDMI with Upscalefunktion to improve the image quality
• Favorite lists
• Childlock
• Various sorting function for channels
• Screen display with full color resolution
• Teletext and subtitle support (OSD)
• 7 days EPG (Electronic Program Guide) for On-Screen Program information
• Multilingual menu
• Multichannel order
• USB 2.0 port (Mediaplayer)
• Digital Audio output (coaxial)
• RS232 port
• Scart AV Output
• 12/230 Volt Power supply
1.2 Delivery
• Allvision HD 2000 DS
• Remote control
• Batteries
• Power supply
• User manual
04 ENGLISH
2. Names and key assignment
2.1 Front view
On / Off Menu
Navigation button Display
2.2 Rear view
LNB input
HDMI
Digital Audio
USB
(behind the panel)
RS232
ScartUSB
Power supply
05ENGLISH
2. Names and key assignment
2.4 Remote control
Zone 1
POWER Turn on/off the unit (Standby)
MUTE Muting the sound
NUMERIC KEYS (0~9) Program change / Enter numbers
TV/RADIO Switches between TV and radio reception
RECALL Changes between last and current program
1
INFO Displays information about the current program
REPEAT / SAT Switches between satellite TV and repeat mode
ZOOM Enlarge the image section
GOTO Function key in different sub-menus
Zone 2
FAV Displays the favorite list (if favourites available)
VOL +/- Adjust the volume
CH +/- Switches TV / radio programs (up / down)
EPG Displays the EPG (Electronic Program Guide)
2
RED Function key
GREEN Function key
YELLOW Function key
BLUE Function key
t / u Volume control / Navigation in the menu
p / q Change TV/Radio programs (up/down) / Navigation in the menu
OK Confirm the current selection / opening the program list
MENU Enter the main menu
EXIT Exits the current menu step by step
3
Zone 3
TXT Displays the teletext of the respective program
SUBTITLE Displaying subtitles (if available)
LIST Access to the recording menu (optional)
AUDIO Selection or change the audio track
PL AY Star t
STOP Stop
PAUSE Pause
REC Start recording (optional)
|
tt / uu| Chapter forward / backward
tt / uu Fast forward / reverse
06
ENGLISH
3. Connecting the set-top box
3.1 Connecting the set-top box
1. Connect the coaxial cable to the LNB.
(You can connect an LNB directly to the LNB IN,
or more LNBs through a DiSEqC switch or multiswitch.
2. Connect the HDMI cable with your TV.
3. Make sure that on your TV is selected corresponding
to the input channel (for example, HDMI 1).
4. Connect the infrared sensor and place in front of your TV.
Coaxial cable
HDMI cable
07ENGLISH
4. Main Menu
After connecting to any other required components, turn on the set-top box. Press the
MENU button to enter the menu.
The main menu consists of:
• Channel list
• Installation
• System
• Accessories
• Media Center
Use the t u buttons to select a menu item and confirm with OK. So you access the
submenu. If you want to exit the menu or a submenu, press the MENU button to leave
the menus step by step. Press EXIT to go completely off the menu.
4.1 Channel list
Press the MENU button to enter the main menu. Go with the t u buttons to „Channel
List“ and press OK to confirm.
The following submenus are available:
1. TV channel list
2. Radio channel list
1. TV channel list:
Select the TV channel list and press OK to confirm. When delivered, a TV station list is
already set, you can change now. The following options are listed to change:
FAV (FAV button)
Press the FAV button to add the channels to a particular favorite group. Select a channel
and press OK to confirm. A window will appear in which you can add the sender to one
or more groups. Choose from favorite group 1 to 8 and confirm with OK. The selection is
recognized by a heart symbol. Repeat the process until all desired channels to a favorite
group were assigned. Press MENU to return to the TV channel list.
Note:
The default password for
the menu access is: 0000
08 ENGLISH
Loading...