Allied Telesis SwitchBlade Line Card User Manual

SwitchBlade Line Card

Quick Install Guide

SwitchBlade Line Card Quick Install Guide
Document Number C613-04030-01 REV H.

Copyright © 2002, 2006 Allied Telesyn International, Corp. 19800 North Creek Parkway,
Suite 200, Bothell, WA 98011, USA.

All rights reserved. No part of this publication may be reproduced without prior written
permission from Allied Telesyn.

Allied Telesyn International, Corp. reserves the right to make changes in specifications
and other information contained in this document without prior written notice. The
information provided herein is subject to change without notice. In no event shall Allied
Telesyn be liable for any incidental, special, indirect, or consequential damages
whatsoever, including but not limited to lost profits, arising out of or related to this
manual or the information contained herein, even if Allied Telesyn has been advised of,
known, or should have known, the possibility of such damages.

All trademarks are the property of their respective owners.

Quick Install Guide 3

Documentation Roadmap

SwitchBlade

Safety and Statutory Information Booklet

Hardware Reference

Software Reference

Chassis & Fan Tray Quick Install Guide

Power Supply Unit Quick Install Guide

Switch Controller Quick Install Guide

Line Card Quick Install Guide

Bandwidth Expander Quick Install Guide

Printed Acrobat PDF

Website

General Customer Support

Visit www.alliedtelesyn.co.nz for
the latest documentation, FAQs,
and support information.

Models Covered By This Guide

This Quick Install Guide includes information on installing the following line
cards. The suffix V2 indicates the silicon revision level:

■ AT-SB4311 48-port 10BASE-T/100BASE-TX (RJ-45)

AT-SB4311 V2

■ AT-SB4352 32-port 100BASE-FX (MT-RJ)

AT-SB4352 V2

■ AT-SB4412 24-port 10BASE-T/100BASE-TX/1000BASE-T (RJ-45)

AT-SB4412 V2

■ AT-SB4441 8-port 1000BASE-X (GBIC)

AT-SB4441 V2

■ AT-SB4442 V2 24-port 1000BASE-T copper or

1000 BASE (SX,LX or ZX) fibre (SFP)

■ AT-SB4541 1-port 10GBASE-LR (XFP)

■ Information on installing switch controllers can be found in the SwitchBlade

Switch Controller Quick Install Guide.

Quick Install Guide updates can be downloaded from
www.alliedtelesyn.co.nz/support/switchblade/.

C613-04030-01 REV H