Allied Telesis AT-DMC1000-LC-50 Product Information

Media Converters | Product Information
DMC Series
Desktop USB-Powered Media Converters
The Allied Telesis DMC Series of Gigabit mini media converters are among the smallest media converters in the market today.
Overview
At just 1.25 inches wide × 3.6 inches deep × 0.85 inches high, Allied Telesis DMC Series media converters can easily fit into the palm of a hand. In addition to being compact—with a small carbon footprint—the DMC Series can also be powered with the included Micro USB to USB cable, and plugged directly into a laptop or PC or may also be powered via the optional AC/DC adapter. This saves installation time and cabling as there are no further power requirements.
Fiber Connections
The Allied Telesis range of Gigabit
media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fiber cabling. Supporting SC, ST and LC fiber connectors, these converters can be used to extend networks with up to 500m of multi-mode fiber.
VLAN Support
Many new backbone switch products now support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that send data packets on the network. DMC Series media converters are fully compatible with these packets, enabling them to be used in modern networks. Media converters not supporting this feature discard these packets, making them unsuitable for modern networks.
Smart MissingLink (SML)
The Smart MissingLink™ (SML) feature
monitors network connections and provides notification when network segments fail, allowing network managers to quickly identify the source and location of failed segments and minimize downtime.
Simple Installation
All Allied Telesis media converters
feature auto MDI/MDI-X, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable. The media converters also allow the installer to test the integrity of the fiber connection, by forcing the converters to communicate over the fiber cable. This Link Test feature allows installers to check for cable faults without the need for expensive fiber-optic test equipment.
Smart Link Restoration
Smart Link Restoration allows the devices, in cases of power failure, link loss or other interrupted service, to automatically restore the link without the need to restart/reset them.
Power Saving
The DMC Series continues the Allied Telesis commitment to the
environment with over 50% power savings. usage, DMC Series media converters are some of the most efficient in the market today.
*
With just 1.5W of power
Key Features
ۼۼ Auto Negotiation
ۼۼ Transparent to IEEE 802.1Q packets
ۼۼ Auto MDI/MDI-X
ۼۼ Smart MissingLink
ۼۼ Smart Link Restoration
ۼۼ Link test
ۼۼ RoHS Compliant
ۼۼ Wall-mountable using AT-DMCWLMT
(sold separately)
alliedtelesis.com
*Over previous models
NETWORK SMARTER
DMC Series | Desktop USB-Powered Media Converters
MODEL FIBER TYPE FIBER-OPTIC
MMF 50/ 125 1310 nm -19 -14 -32 -34 -3 2 km
AT-D MC100 /X X
MMF 62. 5/ 125 1310 nm -22.5 -14 -32 -34 -3 2 km
MMF 50/ 125 850 nm -9.5 -4 -17 -20 -3 550m
AT-DMC1000/XX
MMF 62. 5/ 125 850 nm -9 -4 -17 -20 -3 220m
DIAMETER
Specifications
Status LEDs
SYS ON System operating normally OFF System not running normally Slow Blink fault condition
Fiber OFF no link is established ON link is established Blinking activity is detected
RJ45 port (Left) OFF no link is established ON link is established Blinking activity is detected
RJ45 port (Right) OFF half duplex ON full duplex Blinking collisions occurring
Operational Characteristics
Forwarding/filtering rate 1,488,00pps for 1000Mbps 148,880pps for 100Mbps 14,880pps for 10Mbps
Physical Specifications
Dimensions 3.18 cm × 9.14 cm × 2.16 cm
(W × D × H) 1.25 in × 3.6 in × 0.85 in
Weight 4 oz
Power Characteristics
Micro-B USB connector, 5VDC
Powered from a PC USB port or by optional AC/DC adapter
(AT-DMCPWR-60)
OPTICAL
WAVELENGTH
LAUNCH POWER (dBm) RECEIV E POWER (dBm) MA X
Min Max Min Ty pical Saturation
Environmental Specifications
Operating temperature 0°C to 40°C (32°F to 104°F) Operating humidity 5% to 95% relative humidity
(non-condensing) Storage temperature -15°C to 65°C (5°F to 149°F) Storage humidity 5% to 95% relative humidity
(non-condensing) Altitude Up to 3048 m (100 00 ft)
Electrical and Mechanical Approvals
Safety UL60950-1
EN60950-1
Emissions (EMI ) FCC Class A
EN55 022 Class A CISPR 22 Class A C-T IC K VCCI
Immunity EN55024
EN61000-3-2 EN61000-3-3
DIS TANC E
Ordering Information
AT-DMC10 0/SC-xx
100TX to 100FX/SC Fast Ethernet Desktop USB­powered media converter with multi-mode SC fiber connector
AT-D MC 100/ST-x x
100TX to 100FX/ST Fast Ethernet Desktop USB­powered media converter with multi-mode ST fiber connector
AT-DMC10 0/LC-xx
100TX to 100FX/LC Fast Ethernet Desktop USB powered media converter with multi-mode ST fiber connector
AT-DMC1000/SC-xx
1000T to 1000SX/SC Gigabit desktop USB­powered media converter with multi-mode SC fiber connector
AT-D MC 1000 /S T-x x
1000T to 1000SX/ST Gigabit desktop USB­powered media converter with multi-mode ST fiber connector
AT-DMC1000/LC-xx
1000T to 1000SX/LC Gigabit desktop USB­powered media converter with multi-mode LC fiber connector
Associated Components
AT-D MC WLMT-0 5
Wall mount for DMC Series media converters (5 pack)
Where xx = 00 for USB power cord, no power supply 50 for EU power supply 90 for NA power supply
NETWORK SMARTER
North America Headquarters | 19800 Nor th Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895 Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 53418 2 | T: +65 6383 3832 | F: +65 6383 3830 EMEA & CSA Operations | Incheonweg 7 | 1437 EK Rozenburg | The Netherlands | T: +31 20 7950020 | F: +31 20 7950021
alliedtelesis.com
© 2016 Allied Tele sis, Inc. All right s reserved. Info rmation in this docum ent is subject to chan ge without notice. A ll company names, l ogos, and product d esigns that are trad emarks or registe red trademarks ar e the property of t heir respective o wners.
617-0005 64 Rev C
Loading...