Allen-Bradley 800FM-LF3MN3GQ10 Installation Manual

Technical Data

Original Instructions

22 mm Push Button Specifications

Bulletin Numbers 598, 800B, 800F, 800FC, 800FD, 800MB, 800MR

Top ic Pa ge Top ic Pa ge
Bulletin 800F 22.5 mm Push Buttons 3 Bulletin 800FD 22.5 mm Monolithic Push Buttons 82

Specifications 3 Momentary Push Button Operators, Non-illuminated 82
Momentary Push Button Operators 7 Pilot Light Devices 83
Alternate Action Operators 10 Selector Switch Operators 84
Pilot Light Operators 11 Push-pull/Twist-to-release Mushroom Operators 85
Selector Switch Operators 12 Plastic Enclosures — 1-hole Only 85
Key-operated Selector Switches 17 Assembled Stations 86
Push-pull Operators 20 Replacement Parts 86
Momentary Mushroom Push Buttons 25 Specifications 87
Momentary Multi-operator 27 Approximate Dimensions 88
Reset Operators 31 Instruction Sheet 89
Threaded Reset Rod Reset Operators 31 Bulletin 800B 16 mm Push Buttons 90
Single-turn Potentiometer Assembly 32 Push Button and Pilot Light Operators 90
Key-operated Selector Switch — SensEject 33 Lens Cap with Diffuser 90
Selector Push Button Operators 34 Selector Switch Operators 91
Toggle Switch Operators 35 Emergency Stop Operators 91
Back-of-panel Components 36 Contact Block/Latch Module 92
Plastic and Metal Enclosures 41 Replacement Parts and Accessories 92
Assembled Stations 42 Specifications 94
Pendant Stations 45 Operator Assembly Sequence 95
Accessories 48 Approximate Dimensions 96
Legend Plates/Caps 55 Bulletin 800MR/MB Oiltight Operators 98
Assembled Station Pin Out Chart 64 Momentary Contact Push Buttons — 800MR 98

Bulletin 598 General-purpose Push Button Enclosures 65 Push-pull and Push-pull/Twist-to-release Units — 800MR 100
Bulletin 800FC 22.5 mm Configured Pendant Stations 68 Selector Switch Units — 800MR 102

Operator Mounting and Sequence 68 Potentiometer Operator Only — 800MR 107
Enclosures 68 Pilot Light Units — 800MR 107
1-, 2-, and 3-speed Operators 69 Wobble Stick Units — 800MR 108
800F Selector Switch Operators — Maintained and Non-illuminated 70 Momentary Contact Push Button Units — 800MB 108
800F Multi Operators and Caps — Extended 71 Dual Operator, Non-illuminated — 800MB 110
800F Pilot Lights — Monolithic 72 Pilot Light Units — 800MB 111
1-, 2-, and 3-speed Contact Block Assemblies 72 Accessories — Bulletin 800MB/MR 112
800F Potentiometer Operators 72 Legend Plates — 800MB/MR 116
800F Hole Plug 72 Specifications 118
Configured Pendant Stations 73 Approximate Dimensions — 800MB/MR 119
Accessories 75
Specifications 77
Approximate Dimensions 80
Custom Text Fax/Scan Sheet 81

Summary of Changes

This publication contains the following new or updated information. This list includes substantive updates only and is not intended to reflect
all changes.

Top ic Pa ge

Corrected product photos 20
Corrected product availability information 23
Corrected cat. nos. and descriptions for key-operated selector switches 33
Corrected assembled station pin out chart 64

2 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Bulletin 800F 22.5 mm Push Buttons

Plastic Latch with

Contact Block

Metal Latch with

Contact Block

Legend Plate

(Optional)

Operator

Mounting Ring

(Included with Operator)

Latch

Contact Blocks

and/or Power

Modules

Our Bulletin 800F 22 mm round operator family meets demanding performance specifications. We use state-of-the-art solid modeling
techniques and finite element analysis to optimize the durability and performance of our push buttons.

800FP Plastic Operators

•IP69K

• IP65/66, Type 4/4X/13

• Engineering grade thermoplastics

• Chemical-resistant for harsh environments

3-across x 2-deep Back-of-panel (6 Circuits Max)

• Rugged snap-fit design for plastic or metal latch

• Stackable contact blocks

• Rotating collar for easy one-hand latch removal

• Color-coded contact block plungers for contact
identification

Specifications

800FM Metal Operators

• IP65/66, Type 4/13

• Die-cast metal construction

• Chrome-plated

Assembly Overview

Product Certifications

Attribute Plastic (Bulletin 800FP) and Metal (Bulletin 800FM)

Certifications UR/UL, CSA, CCC, CE
Standards Compliance — CE Marked NEMA ICS-5; UL 508, EN ISO 13850, EN 60947-1, EN 60947-5-1, EN 60947-5-5
Terminal Identification EN/IEC 60947-1
Shipping Approvals ABS
RoHS Yes

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 3

Bulletin 800F 22.5 mm Push Buttons Specifications

Front-of-Panel (Operators)

IMPORTANT

Performance Data — Performance data that is given in this publication is provided only as a guide for you to determine suitability

and does not constitute a performance warranty of any kind. Such data can represent the results of accelerated testing at
elevated stress levels, and you are responsible for correlating the data to actual application requirements. ALL WARRANTIES AS TO
ACTUAL PERFORMANCE, WHETHER EXPRESS OR IMPLIED, ARE EXPRESSLY DISCLAIMED.

Table 1 - Mechanical Ratings — Operators

Attribute Plastic (Bulletin 800FP) Metal (Bulletin 800FM)

Vibration (assembled to panel) Tested at 10…2000 Hz, 1.52 mm displacement (peak-to-peak) max./10 G max. for 3 hr duration, no damage
Shock Tested at 1/2 cycle sine-wave for 11 ms; no damage at 100 G

Degree of protection

Mechanical durability per
EN 60947-5-1 (Annex C)

Operating forces (typical with one contact block)

Operating torque
(typical application with one contact block)

Mounting torque

(1) Momentary mushroom operators are IP65. Plastic keyed operators are IP66, Type 4/13; not Type 4X.
(2) IP65/66 products are compliant to IEC 60529.
(3) IP69K products listed in Table 2 are compliant to ISO 20653 (replaces DIN 40050 Part 9) for IP69K and IEC 60529 for all other IP ratings.
(4) Limit of four contact blocks max for these devices.

(1) (2)

10,000,000 Cycles Momentary push buttons, momentary mushroom
1,000,000 Cycles Multi-function, selector switch, key selector switch, selector jog, SensEject™ key selector switch

500,000 Cycles
300,000 Cycles

100,000 Cycles Potentiometer, toggle switch

Plastic 1.7 N•m (15 lb•in)
Metal 4.4 N•m (40 lb•in)

(3)

IP69K

and IP65/66 (Type 3/3R/4/4X/12/13)

Non-illuminated push-pull E-stop

Twist-to-release E-stop, illuminated push-pull E-stop

Flush/extended = 5 N, E-stop = 36 N

Selector switch = 0.25 N•m (2.2 lb•in)

Mushroom = 9 N

IP65/66 (Type 3/3R/4/12/13)

(4)

(4)

, alternate action push buttons

Table 2 - IP69K Operators and Assembled Stations

IP69K Rated Operators IP69K Rated Assembled Stations

• 800FD-MT44

• 800FP-F*

• 800FP-F* and 800F-AB7

• 800FP-LF*

• 800FP-E*

• 800FP-E* and 800F-ABE7

• 800FP-LE*

• 800FP-FA*

• 800FP-LFA*

• 800FP-G*

• 800FP-P*

• 800FP-MT3*

• 800FP-MT4*

• 800FP-LMT4*

• 800FP-MT6*

• 800F-1YMD and 800F-ALC2 (1 pc) and IP69K rated operators

• 800F-2PM and 800F-ALC2 (2 pcs) and IP69K rated operators

• 800F-3PM and 800F-ALC2 (3 pcs) and IP69K rated operators

• 800F-4PM and 800F-ALC2 (4 pcs) and IP69K rated operators

• 800F-6PM and 800F-ALC2 (6 pcs) and IP69K rated operators

• 800F-AHA1

• 800F-1YMD51, 800F-1YMD52, and 800F-1YMD81

• 800FP-LMT6*

• 800FP-LMP3*

• 800FP-MP4*

• 800FP-LMP4*

• 800FP-MM4*

• 800FP-LMM4*

• 800FP-MM6*

• 800FP-LMP6*

• 800FP-MP9*

• 800FP-LMP9*

• 800FP-U2*

• 800FP-LU2*

• 800FP-U3*

• 800FP-MM9*

• 800FP-POT*

•800F-1YP1

•800F-1YP2

•800F-1YP3

•800F-1YP7

•800F-1YP8

•800F-1YM1

•800F-1YM2

•800F-1YM3

•800F-1YM7

•800F-1YM8

•800F-1YML1

•800F-1YML2

•800F-1YML3

•800F-1YMD51

•800F-1YMD52

•800F-1YMD81

Table 3 - Environmental — Operators

Attribute Plastic (Bulletin 800FP) Metal (Bulletin 800FM)

Temperature Range

Humidity ≤95% RH from 25…60 °C (77…140 °F)

(1) Operating temperatures below 0 °C (32 °F) are based on the absence of freezing moisture and liquids, UL Recognized to 55 °C (131 °F) - Incandescent module max. 40 °C (104 °F).

Operating
Short-term Storage -40…+85 °C (-40…+185 °F)

-25…+70 °C (-13…+158 °F)

(1)

4 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Back-of-panel Components

Bulletin 800F 22.5 mm Push Buttons Specifications

IMPORTANT

Performance Data — Performance data that is given in this publication is provided only as a guide for you to determine suitability

and does not constitute a performance warranty of any kind. Such data can represent the results of accelerated testing at
elevated stress levels, and you are responsible for correlating the data to actual application requirements. ALL WARRANTIES AS TO
ACTUAL PERFORMANCE, WHETHER EXPRESS OR IMPLIED, ARE EXPRESSLY DISCLAIMED.

Table 4 - Electrical Ratings — Back-of-panel Components

Attribute Screw Termination Spring Clamp Termination

A600, Q600

Standard Contact Block Ratings

Low-voltage Contact Block Ratings

LED Module Ratings

Thermal Current 10 A max. enclosed (40 °C [104 °F] ambient) to UL508, EN 60947-5-1 @ A600
Insulation Voltage (U

Wire Capacity

Recommended Tightening Torque on Screw Terminals 0.7…0.9 N•m (6…8 lb•in)
Dielectric Strength (Minimum) 2500V for 1 minute

External Short Circuit
Protection

Electrical shock protection Finger-safe conforming to IP2X

(1) Low-voltage contacts are recommended for applications below 17V, 5 mA.
(2) Wires less than #18 AWG (0.75 mm2) may not hold in terminal securely.

)

i

(1)

Lamp Voltage Voltage Range Current, Typical Leakage Current Frequency

Universal

24V AC
24V DC

120V AC

240V AC

Screw Terminal
Spring-clamp terminal #18…14 AWG (0.75…1.5 mm²) One per spring clamp, two spring clamps per terminal

Standard blocks 10 A type gL/gG cartridge fuse to EN 60269-2-1 or gN (Class J to UL 248-8 or Class C to UL 248-4)
Low-voltage contact blocks 6 A type gL/gG cartridge fuse to EN 60269-2-1 or gN (Class J to UL 248-8 or Class C to UL 248-4)

(2)

600V AC

24…120V AC/DC

10…29V AC

10…30V DC

102…132V AC

204…264V AC

AC 15, DC 13 to IEC/EN 60947-5-1 and UL 508, 17V, 5 mA min.

5V, 1 mA DC min.

C300, R150, AC 15, DC 13 to EN 60947-5-1 and UL 508

15 mA (AC), 12 mA (DC)

31 mA

24 mA

6 mA
6 mA

Screw terminal = 690V, spring-clamp = 300V

#18…12 AWG (0.75…2.5 mm²); Max. (2) #14 AWG or (1) #12 AWG

A300, Q300

300V AC

3 mA
3 mA
3 mA
3 mA
3 mA

50/60 Hz, DC

50/60 Hz

DC
50/60 Hz
50/60 Hz

Table 5 - Mechanical Ratings — Back-of-panel Components

Attribute Valu e

Vibration (assembled to panel) Tested at 10…2000 Hz, 1.52 mm displacement (peak-to-peak) max./10 G max. 6 hr
Shock Tested at 1/2 cycle sine-wave for 11 ms and no damage at 100 G max.
Contact durability per EN 60947-5-1 (Annex C) 10,000,000 cycles

N.O. Slow double make and break

Slow double make and break — positive opening

→

Double break / double make, late break —

positive opening

→

Double break / double make, early break — positive opening

→

Contact operation

Push button travel to
change electrical state

Operating forces (typical)

N.C. & S.M.C.B.

N.O.E.M. Double break / double make, early make

N.C.L.B.

N.C.E.B.

N.C. and N.O.E.M. 1.5 mm (0.060 in.)
N.O. and N.C.L.B. 2.5 mm (0.1 in.)
Single-circuit contact block 3.4 N
Dual-circuit contact block 5…6.5 N

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 5

Bulletin 800F 22.5 mm Push Buttons Specifications

Table 6 - Illumination — Back-of-panel Components

Attribute Green Red White

LED Dominant Wavelength 525 nm 629 nm —
LED Luminous Intensity 780 mcd 780 mcd 360 mcd
Incandescent maximum wattage 2.6 W

Table 7 - Materials — Back-of-panel Components

Attribute Valu e

Springs Stainless steel and zinc coated music wire

Electrical contacts

Ter min als

Standard Silver-nickel
Low-voltage Gold-plated over silver
Screw Brass
Spring-clamp Silver-plated brass

Material Listing

Component For Use with Material Used

Panel gasket All operators Nitrile, TPE

Diaphragm seal Illuminated push button, non-illuminated push button Automotive industry acceptable silicone

K-seal

Diaphragm retainer, return spring I Illuminated push button, non-illuminated push button, momentary mushroom Stainless steel

Return spring II

Button cap/mushroom head

2-color molded button cap Non-illuminated push button PBT/polycarbonate blend

Lens Multi-function Acetal

Lens, knob

Knob Non-illuminated selector switch Glass-filled polyamide

Plastic bezel/bushing I

Plastic bezel/bushing II, jam nut Pilot light, reset jam nut, reset pushers Glass-filled PBT

Metal bezel/bushing All metal operators Zinc

Diffuser Illuminated push button, pilot light Polycarbonate

Legend frames — Glass-filled polyamide

Plastic mounting ring All plastic operators Glass-filled polyamide

Metal mounting ring All metal operators Chromated zinc

Plastic latch — Glass-filled polyamide

Metal latch — Chromated zinc + stainless steel

Plastic enclosure — PBT/polycarbonate blend

Metal enclosure — Aluminum

Terminal screws LED module, incandescent module, contact blocks Zinc-plated steel with chromate

Terminals LED module, incandescent module, contact blocks Brass with silver-nickel contacts

Spring clamps LED module, incandescent module, contact blocks Stainless steel

Lamp socket Incandescent module Brass

Housing Incandescent module, LED module Glass-filled polyamide

Low-voltage terminals Contact blocks Gold-plated silver-nickel contacts

Low-voltage spanner Contact blocks Gold-plated silver-nickel contacts

Spanner Contact blocks Brass with silver-nickel contacts

Boot

Selector switch, key selector switch, push/twist-to-release E-stop, key E-stop,

push/pull mushroom

Reset, selector switch, key selector switch, alternate action, push/twist-to-release

E-stop, key E-stop, push/pull mushroom

Non-illuminated push button, momentary mushroom, reset, push/twist-to-release

E-stop, key E-stop, push/pull mushroom, multi-function

Illuminated push button, illuminated momentary mushroom, illuminated selector

switch

Non-illuminated push button, illuminated push button, momentary mushroom,
selector switch, key selector switch, push/twist-to-release E-stop, key E-stop,

push/pull mushroom, multi-function, reset

Toggle Switch, illuminated push button, non-illuminated push button, multi-function

illuminated and non-illuminated

Nitrile

Zinc-coated music wire

PBT/polycarbonate blend

Polyamide

Glass-filled polyamide

Automotive industry acceptable silicone

6 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Momentary Push Button Operators

Flush Operator

Cat. No. 800FP-F3

Extended Operator
Cat. No. 800FM-E4

Guarded Operator
Cat. No. 800FP-G6

Non-illuminated — Flush, Extended, Guarded

Color Package Quantity

Black
Green

1

Red

Plastic Metal Plastic Metal

Cat. No. Cat. No. Cat. No. Cat. No.

800FP-F2 800FM-F2 800FP-E2 800FM-E2
800FP-F3 800FM-F3 800FP-E3 800FM-E3
800FP-F4 800FM-F4 800FP-E4 800FM-E4

800F P – F 3 –

abcd

Bulletin 800F 22.5 mm Push Buttons Momentary Push Button Operators

Flush Extended

abcd

Operator Construction Operator Type Color Cap Packaging

Code Description Code Description Code Description Code Description

P

M

Round plastic operator

(IP69K; IP66, Type 4/4X/13)

Round metal operator

(IP66, Type 4/13)

FFlush 0 Green Blank 1 per package
E Extended 1Red BP

10 per package

GGuarded 2Amber

3Blue
4Clear
5Yellow
6Blue

8

Gray

(1)

9No cap

(2)

(1) Available in flush only.
(2) Assortment pack contains one cap of each color, not available in BP packaging.
(3) Only available with no color cap (option 9 from Table c).

X

Assortment pack

(3)

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 7

Bulletin 800F 22.5 mm Push Buttons Momentary Push Button Operators

Flush Operator

Cat. No. 800FP-F301

Non-illuminated — with Two-color Molded Legend Caps

Button Color Text Color Legend Text Package Quantity

Green White

Red White

Black White →

START

I

STOP 800FP-F402 800FM-F402 800FP-E402 800FM-E402

1

O

800F P – F 3 01

abcd

Flush Extended

Plastic Metal Plastic Metal

Cat. No. Cat. No. Cat. No. Cat. No.

800FP-F301 800FM-F301 — —

800FP-F306 800FM-F306 — —

— — 800FP-E405 800FM-E405

800FP-F208 800FM-F208 800FP-E208 800FM-E208

abcd

Operator Construction Operator Type Color Cap

Legend Text

Code Description Code Description Code Description Code Description

P

M

Round plastic operator

(IP69K; IP66, Type 4/4X/13)

Round metal operator

(IP66, Type 4/13)

FFlush 0Orange Blank No Text
E Extended 1White 01 START
GGuarded 2Black 02 STOP

3 Green 05 O
4Red 06 I
5Yellow 08 →

6Blue 09

10

11 R

(1) For custom laser-engraved legend cap, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
(2) White and yellow caps have black text. All other color caps have white text.
(3) Legend button cap supplied loose for customer installation.
(4) For valid combinations, see Table 8
(5) Available for flush only.

.

Table 8 - Valid Color Cap/Legend Text Codes

Color

Flush Caps Extended Caps

White FORWARD, REVERSE, START, I, →, R →, R
Black FORWARD, REVERSE, →, R STOP, O, →, R
Green FORWARD, REVERSE, START, I, →→

Red FORWARD, REVERSE, STOP, O, → STOP, O, →

Yellow FORWARD, REVERSE, →→

Blue FORWARD, REVERSE, →, R →, R

Tex t

(1) (2) (3) (4)

Forward
Reverse

(5)

(5)

8 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Bulletin 800F 22.5 mm Push Buttons Momentary Push Button Operators

Flush Operator

Cat. No. 800FM-LF4

Extended Operator
Cat. No. 800FP-LE3

Guarded Operator

Cat. No. 800FP-LG3

X4

L1

AC

L2

L1, + L2,

-

X1

X3 X2

-

+

X4

X3

-

+

X4 X1

X3 X2

-

+

X4

X3

-

+

X4

X3

-

+

X1

X2

X1

X2

X1

X2

X4

X3

-

+

Cat _ _-N5_
Cat _ _-N7_
Cat _ _-Q5_
Cat _ _-Q7_

Cat _ _-N3_
Cat _ _-Q3_

X1

X2

X1

X2

AC
DC

120V AC/240V AC LED 24V AC/DC LED

Cat _ _-D _ C

6. . . 120V AC/DC

Test

Essai
Prova
Teste

Ensayo

Signal

Segnale

Sinal
Senãl

Illuminated and Non-

illuminated Momentary Flush

Illuminated and Non-illuminated

Momentary Extended

18 (0.71)

29.6

(1.17)

Illuminated Momentary Guarded

Illuminated — Flush, Extended, Guarded

Flush Extended

Color Package Quantity

Green

Red 800FP-LF4 800FM-LF4 800FP-LE4 800FM-LE4

Yellow

1

Clear

abcd

Operator Construction Operator Type

Code Description Code Description Code Description Code Description

P

M

(1) For custom laser-engraved operator, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
(2) When using LED for illumination, a white LED is recommended.
(3) Only available with no color cap (9 from Table c).

Round plastic operator

(IP69K; IP66, Type 4/4X/13)

Round metal operator

(IP66, Type 4/13)

Plastic Metal Plastic Metal

Cat. No. Cat. No. Cat. No. Cat. No.

800FP-LF3 800FM-LF3 800FP-LE3 800FM-LE3

800FP-LF5 800FM-LF5 800FP-LE5 800FM-LE5
800FP-LF7 800FM-LF7 800FP-LE7 800FM-LE7

800F P – LE 3 –

abcd

FFlush 0

Color Cap

Amber

(1)

(2)

Packaging

Blank 1 per package

E Extended 3 Green BP
GGuarded 4Red

5
6

Yellow

Blue

(2)

(2)

7Clear

9No cap

10 per package

(3)

Push-to-test Push Button Device Schematic

Illuminated push buttons can be wired as a push-to-test device by
using the following schematic and a catalog number 800F-XD7
diode module (see page 52

).

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 9

Approximate Dimensions — Momentary Operators

Dimensions in millimeters (inches). Dimensions are not intended to
be used for manufacturing purposes.

29.6

(1.17)

10

(0.39)

29.6

(1.17)

14 (0.55)

Bulletin 800F 22.5 mm Push Buttons Alternate Action Operators

Cat. No. 800FM-FA3

Cat. No. 800FP-LFA3

14 (0.55)

29.6

(1.17)

Alternate Action Operators

Non-illuminated

800F M – FA 3

abc

abc

Operator Construction

Operator Type

Code Description Code Description Code Description

P

M

(1) Must use N.O.E.M. or N.C. contacts.
(2) For custom laser-engraved legend cap, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
(3) Assortment pack contains one each of cap colors white, black, green, red, yellow, and blue.

Round plastic operator

(IP69K; IP66, Type 4/4X/13)

Round metal operator

(IP66, Type 4/13)

Non-illuminated, flush,

FA

alternate action

(1)

Lens Cap Color

(2)

0Orange

1White
2Black
3 Green
4Red
5 Yellow
6Blue
9No cap

X

Assortment pack

(3)

Illuminated

800F P – LFA 3

abc

abc

Operator Construction

Operator Type

(1) (2)

Code Description Code Description Code Description

P

M

(1) Must use N.O.E.M. or N.C. contacts.
(2) LED module is required for illumination, cannot use incandescent module.
(3) For custom laser-engraved legend cap, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
(4) Use of a white LED is recommended.

Round plastic operator

(IP69K; IP66, Type 4/4X/13)

Round metal operator

(IP66, Type 4/13)

LFA

Illuminated, flush,

alternate action

Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

Non-illuminated Guarded, Illuminated and Non-illuminated

Alternate Action Push Button Operators

Color Cap

0

(3)

Amber

(4)

3 Green

4Red

5

6

Yellow

Blue

(4)

(4)

7Clear

9No cap

10 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Pilot Light Operators

Plastic Pilot Light
Cat. No. 800FP-P7

Metal Pilot Light

Cat. No. 800FM-P4

29.6

(1.17)

11

(0.43)

Bulletin 800F 22.5 mm Push Buttons Pilot Light Operators

Color Package Quantity

Green

Red

1

Yellow

Plastic Metal

Cat. No. Cat. No.

800FP-P3 800FM-P3
800FP-P4 800FM-P4
800FP-P5 800FM-P5

800F P – P 3 –

abcd

abcd

Operator Construction Operator Type

Lens Color

(1)

Packaging

Code Description Code Description Code Description Code Description

P

M

Round plastic operator

(IP69K; IP66, Type 4/4X/13)

Round metal operator

(IP66, Type 4/13)

PDiffuser 0

3 Green BP
4Red
5

6

Amber

Yellow

Blue

(2)

Blank 1 per package

10 per package

(2)

(2)

7Clear

9No cap

(1) For custom laser-engraved operator, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
(2) When using LED for illumination, a white LED is recommended.
(3) Only available with no color cap (Code 9 from Table c).

(3)

Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

Pilot Light Operators

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 11

Bulletin 800F 22.5 mm Push Buttons Selector Switch Operators

Standard Knob

Cat. No. 800FP-SM22

Knob Lever

Cat. No. 800FP-HM22

Selector Switch Operators

2-position, Non-illuminated

Switching Angle

Table 9 - Target Table and Operator Position

Contact Type

(2)

(1)

N.O. O X
N.C. X O

(1) Target table for spring return from left is reversed from what is shown in the table.
(2) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.

Note: X = Closed / O = Open

Operator Type

Color

Package Quantity

Plastic Metal

Cat. No. Cat. No.

Black with White Insert

Maintained (60° switching angle)

1 800FP-SM22 800FM-SM22

800F P – S M2 2 –

abcde f

abc

Operator Construction Operator Type Operator Function

Code Description Code Description Code Type

P

M

Round plastic operator

(IP66, Type 4/4X/13)

Round metal operator

(IP66, Type 4/13)

SStandard knob

H

Knob lever

(1)

M2

L2

Maintained (60° switching

angle)

Spring return from left

(60° switching angle)

Standard Knob

12 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Spring return from right

R2

(60° switching angle)

de f

Knob/Insert Color Orientation Packaging

Code Knob Color Insert Color Code Description Code Description

2Black White Blank Standard Blank 1 per package

N

(1) 30 mm hole spacing does not work if knob lever is used. See page 47 for recommended operator panel spacing.
(2) For use in vertical mount Bulletin 800F enclosures.
(3) Not available with 90° offset orientation.

90° offset

(2)

BP

10 per package

(3)

Bulletin 800F 22.5 mm Push Buttons Selector Switch Operators

Standard Knob

Cat. No. 800FP-LSM26

2-position, Illuminated

IMPORTANT Crevices can exist on product that make it unsuitable for certain applications. Consult your

local Rockwell Automation sales office or Allen-Bradley distributor.

Switching Angle

Table 10 - Target Table and Operator Position

Contact Type

(2)

(1)

N.O. O X
N.C. X O

(1) Target table for spring return from left is reversed from what is shown in the table.
(2) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.

Note: X = Closed / O = Open

Operator Type

Color

Package Quantity

Plastic Metal

Cat. No. Cat. No.

Green

Red

Maintained (60° switching angle)

1

800FP-LSM23 800FM-LSM23
800FP-LSM24 800FM-LSM24

Yellow 800FP-LSM25 800FM-LSM25

800F P – LS M2 3

abcde

abc

Operator Construction Operator Type Operator Function

Code

P

M

Description

Round plastic operator

(IP66, Type 4/4X/13)

Round metal operator

(IP66, Type 4/13)

(1)

Code Description Code Type

LS Standard knob

LH

Knob lever

(3)

M2

Maintained (60° switching

angle)

Spring return from left

L2

(60° switching angle)

Standard Knob

de

Knob/Insert Color Orientation

Code Knob Color Insert Color Code Description

Amber

(2)

White Blank Standard

90° offset

0
3 Green White N

4Red White

Yellow

Blue

(2)

(2)

Black
White

5
6

7 Clear Black

(1) LED module is required for illumination.
(2) Use of a white LED is recommended.
(3) Only available in clear.
(4) For use in vertical mount enclosures.

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 13

Spring return from right

R2

(4)

(60° switching angle)

Bulletin 800F 22.5 mm Push Buttons Selector Switch Operators

Standard Knob

Cat. No. 800FP-SM32

Knob Lever

Cat. No. 800FM-HM32

3-position, Non-illuminated

Switching Angle

Table 11 - Target Table and Operator Position (60° Switching Angle)

Contact Type

(1)

Position on

Mounting Latch

Left X O O

Right O O X

N.O.

Center X O X

Center CL

Center CR

(2)

(2)

XOO
OOX

Left O X X

Right X X O

N.C.

(1) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.
(2) The center contact block can have the same target output as the left or right contact block, by specifying center left (CL) or center right (CR) option.

Note: X = Closed / O = Open

Color

Center O X O

Center CL

Center CR

Operator Type

(2)

(2)

OXX
XXO

Standard Knob Knob Lever

Package
Quantity

Plastic Metal Plastic Metal

Cat. No. Cat. No. Cat. No. Cat. No.

Black with White

Insert

Maintained

Spring return from left and right

1

800FP-SM32 800FM-SM32 800FP-HM32 800FM-HM32
800FP-SB32 800FM-SB32 800FP-HB32 800FM-HB32

800F P – S M3 2

abcdef

abc

Operator Construction Operator Type Operator Function

Code Description Code Description Code Type

P

M

Round plastic operator

(IP66, Type 4/4X/13)

Round metal operator

(IP66, Type 4/13)

SStandard knob M3
H

Knob lever

(1)

de f

Knob/Insert Color Orientation Operation

Code Knob Color Insert Color Code Description Code Description

2Black White Blank Standard Blank Standard

N

(1) 30 mm hole spacing does not work if knob lever is used. See page 47 for recommended operator panel spacing.
(2) For use in vertical mount Bulletin 800F enclosures.
(3) The center contact block can have the same target output as the left or right contact block, by specifying center left (CL) or center right (CR) option.

90° offset

(2)

14 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

L3

R3

B3

CL
CR

Maintained

Spring return from left

Spring return from right

Spring return from left and right

Center left

Center right

(3)

(3)

Bulletin 800F 22.5 mm Push Buttons Selector Switch Operators

Standard Knob

Cat. No. 800FP-LSM37

3-position, Illuminated

IMPORTANT Crevices can exist on product that make it unsuitable for certain applications. Consult your

local Rockwell Automation sales office or Allen-Bradley distributor.

Switching Angle

Table 12 - Target Table and Operator Position (60° Switching Angle)

Contact Type

(1)

N.O.

N.C.

(1) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.

Note: X = Closed / O = Open

Operator Type

Position on

Mounting Latch

Left X O O

Right O O X

Left O X X

Right X X O

Green Red Yellow

Package
Quantity

Plastic Metal Plastic Metal Plastic Metal

Cat. No. Cat. No. Cat. No. Cat. No. Cat. No. Cat. No.

Maintained

Spring return from right

Spring return from left

Spring return from left and right

1

800FP-LSM33 800FM-LSM33 800FP-LSM34 800FM-LSM34 800FP-LSM35 800FM-LSM35
800FP-LSR33 800FM-LSR33 800FP-LSR34 800FM-LSR34 800FP-LSR35 800FM-LSR35
800FP-LSL33 800FM-LSL33 800FP-LSL34 800FM-LSL34 800FP-LSL35 800FM-LSL35
800FP-LSB33 800FM-LSB33 800FP-LSB34 800FM-LSB34 800FP-LSB35 800FM-LSB35

800F P – LS M3 3

abcde

ab c

Operator Construction Operator Type Operator Function

Code

P

M

Description

Round plastic operator

(IP66, Type 4/4X/13)

Round metal operator

(IP66, Type 4/13)

(1)

Code Description Code Type

LS Standard knob M3
LH

Knob lever

(3)

L3
R3

B3

Maintained

Spring return from left

Spring return from right

Spring return from left and right

de

Knob/Insert Color Orientation

Code Knob Color Insert Color Code Description

Amber

(2)

White Blank Standard

90° offset

0
3 Green White N

4Red White

Yellow

Blue

(2)

(2)

Black
White

5
6

7 Clear Black

(1) LED module is required for illumination, cannot use incandescent module.
(2) Use of a white LED is recommended.
(3) Only available in clear.
(4) For use in vertical mount Bulletin 800F enclosures.

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 15

(4)

Bulletin 800F 22.5 mm Push Buttons Selector Switch Operators

Standard Knob

Cat. No. 800FP-SM42

38.8

(1.53)

28 (1.1)

4-position, Non-illuminated

Table 13 - Target Table and Operator Position (45° Switching Angle)

Contact Type

(2)

Position on

Mounting Latch

(1)

Left O O X O

RightXOOO

N.O.

Center X O X O

Center CL O O X O

Center CR X O O O

LeftOOOX

N.C.E.B.

Right O X O O

Center CL O O O X

Center CR O X O O

Left X X O X

RightOXXX

N.C.L.B.

CenterOXOX

Center CL X X O X

Center CR O X X X

(1) Must use N.O., N.C.E.B., or N.C.L.B. contact blocks only. Cannot use N.C. or N.O.E.M. contact blocks with 4-position selector switch.
(2) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.

Note: X = Closed / O = Open

Standard Knob — Maintained

Color Pkg. Quantity

Plastic Metal

Cat. No. Cat. No.

Black with White Insert 1

800FP-SM42 800FM-SM42

800F P – S M4 2

abcdef

abc

Operator Construction Operator Type Operator Function

Code Description Code Description Code Type

P

(IP66, Type 4/4X/13)

M

(IP66, Type 4/13)

Round plastic

operator

Round metal

operator

SStandard knob

HKnob lever

M4

Maintained (45°

switching angle)

Approximate Dimensions — Selector Switch Operators

Illuminated and Non-illuminated Knob Selector Switch Operators

29.8

(1.17)

Non-illuminated Knob Lever Selector Switch Operators

def

Knob/Insert Color Orientation Operation

Knob

Code

Color

2BlackWhiteBlank Standard Blank Standard

(1) For use in vertical mount enclosures.
(2) The center contact block can have the same target output as the left or right contact

block, by specifying center left (CL) or center right (CR) option.

Insert
Color

Code Description Code Description

90° offset

(1)

CL

Center left

CR

Center right

N

(2)

(2)

16 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

27.9 (1.1)

Key-operated Selector Switches

Key Selector Switch

Cat. No. 800FP-KM21R

Master Key System

Key Code

No Master Key

2-position, Non-illuminated

Switching Angle

Bulletin 800F 22.5 mm Push Buttons Key-operated Selector Switches

Table 14 - Target Table and Operator Position

Contact Type

(2)

(1)

N.O. O X
N.C. X O

(1) Target table for spring return from left is reversed from what is shown in the table.
(2) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.

Note: X = Closed / O = Open

Operator Type

Key Removal Position

Package Quantity

Plastic Metal

Cat. No. Cat. No.

Left

800FP-KM21 800FM-KM21

1

Both 800FP-KM23 800FM-KM23

800F M – KM2 1

abcd

ab c

Operator Construction Operator Type

Key Removal Position

Code Description Code Type Code Position

Round plastic operator

P

M

(IP66, Type 4/13)

Round metal operator

(IP66, Type 4/13)

KM2

KL2

KR2

Maintained

(60° switching angle)

Spring return from left

(60° switching angle)

Spring return from right

(60° switching angle)

1Left

2Right

3Both

Standard Knob

(4)

d

Ronis Key Lock

(1) (2) (3)

Code Key No. Code Key No.

Blank 3825 (Standard) 27R 4001

R455 28R 4002
01R 3801 29R 4003
02R 3802 30R 4004
03R 3803 31R 4005

04R 3804 32R 4006
05R 3805 33R 4007
06R 3806

(1) Keyed operators are IP66, Type 4/13.
(2) Not intended for high security applications. Interoperability is possible with certain key/cylinder lock combinations. Consult your local Rockwell Automation sales office or

Allen-Bradley distributor for interoperability information.
(3) For replacement Ronis keys, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
(4) Key removal in maintained positions only.

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 17

Bulletin 800F 22.5 mm Push Buttons Key-operated Selector Switches

Key-operated Selector Switch

Cat. No. 800FP-KM31R

Key-operated Selector Switch

Cat. No. 800FM-KM31R

3-position, Non-illuminated

Switching Angle

Table 15 - Target Table and Operator Position (60° Switching Angle)

Contact Type

(1)

Position on

Mounting Latch

Left X O O

N.O.

Right O O X

Center X O X

Left O X X

N.C.

Right X X O

Center O X O

(1) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.

Note: X = Closed / O = Open

Key Removal

Position

Operator Type

Package Quantity

Standard Knob

Plastic Metal

Cat. No. Cat. No.

Left

All

800FP-KM31 800FM-KM31

800FP-KM33 800FM-KM33

1

Center 800FP-KM34 800FM-KM34

Center 800FP-KB34 800FM-KB34

800F M – KM3 3

abcd

ab c

Operator Construction Operator Type

Code Description Code Description Code Type

Round plastic operator

P

(IP66, Type 4/13)

Round metal operator

M

(IP66, Type 4/13)

KM3 Maintained 1Left

KR3 Spring return from right 3All

KL3 Spring return from left 4 Center

d KB3 Spring return from both 5 Left/center

See page 17

(1) Key removal in maintained positions only.
(2) Keyed operators are IP66, Type 4/13.
(3) Not intended for high security applications. Interoperability is possible with certain key/cylinder lock combinations. Consult your local

(4) For replacement Ronis keys, consult your local Rockwell Automation sales office or Allen-Bradley distributor
(5) Key removal position only valid with operator types 800F_-KM3 and 800F_-KL3.

for optional key

(2) (3) (4)

codes

Rockwell Automation sales office
or Allen-Bradley distributor for interoperability information.

18 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Key Removal Position

7

Center/right

(1)

(5)

Bulletin 800F 22.5 mm Push Buttons Key-operated Selector Switches

29.6

(1.17)

21.2

(0.83)

47.1

(1.85)

Approximate Dimensions — Key-operated Selector Switches

Key Selector Switch Operators

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 19

Bulletin 800F 22.5 mm Push Buttons Push-pull Operators

40 mm Trigger Action

Twistto-Release Mushroom

Cat. No. 800FP-MT44

40 mm Trigger Action

PushPull Mushroom

Cat. No. 800FP-MP44

90 mm Half-dome

Cat. No. 800FP-MP94

Push-pull Operators

2-position, Non-illuminated — Twist-to-release/Push-pull (Trigger Action)

IMPORTANT • All emergency stop operators are EN ISO 13850 compliant with standard N.C., N.C.L.B., or self-monitoring contact blocks.

• E-stop operators, latch, and contact block combinations have been third-party tested for B10d values. B10d values can
be found in publication SAFETY-SR001

Color Package Quantity

Red 1

40 mm Mushroom (Trigger Action) Twist-to-Release 40 mm Mushroom (Trigger Action) Push-Pull

800FP-MT44 800FM-MT44 800FP-MP44 800FM-MP44

.

Plastic Metal Plastic Metal

Cat. No. Cat. No. Cat. No. Cat. No.

800F P – MT4 4

abcd

abc

Operator Construction Operator Type Color Cap Engraving

Code Description

P

M

Round plastic operator

(IP69K; IP66, Type 4/4X/13)

Round metal operator

(IP66, Type 4/13)

Push, Twist-to-Release

Code Type 2Black Blank No engraving on cap

MT3 30 mm color cap 3 Green LE EMO laser engraved
MT4 40 mm color cap 4Red E EMO printed
MT6 60 mm color cap 5 Yellow

Push-pull

(1)

(2)

MP4 40 mm color cap

Half-dome Push-pull

MP9

90 mm color cap

(1) Only available with red color cap.
(2) Limit of four contact blocks max. for these devices.
(3) Half-dome operators only available with black, red, and yellow color caps
(4) For EMO guards, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
(5) Only available on 40 mm color cap.
(6) Only available on red, 40 mm push, twist-to-release operator type (MT44).

(2)

(3)

(4) (5) (6)

d

Code Color Code Description

6Blue

20 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Bulletin 800F 22.5 mm Push Buttons Push-pull Operators

40 mm Illuminated

TwisttoRelease

Cat. No. 800FP-LMT44

40 mm Mushroom Push-pull

Cat. No. 800FM-LMP44

90 mm Half-dome

Cat. No. 800FP-LMP94

2-position, Illuminated — Twist-to-release / Push-pull (Trigger Action)

IMPORTANT • LED module is required for illumination.

• All emergency stop operators are EN ISO 13850 compliant with standard N.C., N.C.L.B., or self-monitoring contact blocks.

• E-stop operators, latch, and contact block combinations have been third-party tested for B10d values. B10d values can
be found in publication SAFETY-SR001

40 mm Mushroom (Trigger Action) Twist-to-Release 40 mm Mushroom (Trigger Action) Push-Pull

Color Package Quantity

Red 1 800FP-LMT44 800FM-LMT44 800FP-LMP44 800FM-LMP44

.

Plastic Metal Plastic Metal

Cat. No. Cat. No. Cat. No. Cat. No.

800F P – LMP4 3

abc

abc

Operator Construction Operator Type Lens Cap Color

Code Description

P

M

Round plastic operator

(IP69K; IP66, Type 4/4X/13)

Round metal operator

(IP66, Type 4/13)

Push, Twist-to-Release
Code Type 3 Green

LMT4 40 mm color cap 4Red
LMT6 60 mm color cap 5

Push-pull

LMP3 30 mm color cap
LMP4 40 mm color cap
LMP6 60 mm color cap

Half-dome Push-pull

LMP9

(1) Only available with red color cap.
(2) 60 mm version has black arrows; 30 and 40 mm versions have white arrows.
(3) Limit of four contact blocks max. for these devices.
(4) Half-dome operators only available with red and yellow lens cap colors.
(5) Use of a white LED is recommended.
(6) Only available with 40 mm Push-Pull color cap (Code LMP4 from Table b).

90 mm color cap

(1) (2)

(3)

(3)

(4)

Code Color

Yellow

6

Blue

(5)

(5) (6)

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 21

Bulletin 800F 22.5 mm Push Buttons Push-pull Operators

40 mm Key Release Mushroom

Cat. No. 800FP-MK44

2-position, Non-illuminated — Mushroom, Key Release (Trigger Action)

IMPORTANT • All emergency stop operators are EN ISO 13850 compliant with standard N.C., N.C.L.B., or self-monitoring contact blocks.

• E-stop operators, latch, and contact block combinations have been third-party tested for B10d values. B10d values can
be found in publication SAFETY-SR001.

2-Position (Trigger Action) 40 mm Mushroom Key Release

Color Package Quantity

Red 1

800F P – MK4 4

abcd

Plastic Metal

Cat. No. Cat. No.

800FP-MK44 800FM-MK44

abcd

Operator Construction Operator Type Lens Cap Color

Code Description Key Release Mushroom Code Color Code Key No.

P

M

(1) Keyed operators are IP66, Type 4/13.
(2) Not intended for high security applications. Interoperability is possible with certain key/cylinder lock combinations. Consult your local Rockwell Automation sales office or Allen-

Bradley distributor for interoperability information.

(3) For replacement Ronis keys, consult your local Rockwell Automation sales office or Allen-Bradley distributor.

Round plastic operator

(IP66, Type 4/13)

Round metal operator

(IP66, Type 4/13)

Code Type 4Red Blank 3825 (Standard)

MK4 40 mm R455

Ronis Key Lock

01R 3801
02R 3802
03R 3803
04R 3804
05R 3805
06R 3806
27R 4001
28R 4002
29R 4003
30R 4004

31R 4005
32R 4006
33R 4007

(1) (2) (3)

22 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Bulletin 800F 22.5 mm Push Buttons Push-pull Operators

Illuminated 3-position Push-pull

Cat. No. 800FM-LMP44E3

3-position, Illuminated and Non-illuminated — Mushroom

IMPORTANT Sold as standalone operator only. Not available as a composite catalog number.

Table 16 - Target Table and Operator Position

Contact Type

(2)

(1)

Out Center In

N.O. O O X
N.C.E.B X O O
N.C.L.B X X O

(1) Must use N.O., N.C.E.B., or N.C.L.B. contact blocks only. Cannot use N.C. or N.O.E.M. contact blocks with 3-position push-pull operators.
(2) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.

Note: X = Closed / O = Open

Operator Function Operator Type Color Package Quantity

(1)

Black

Non-illuminated

Momentary Out, Maintained

Center, Momentary In

Illuminated

Non-illuminated

Momentary Out, Maintained

Center, Maintained In

Illuminated

(1) Available in non-illuminated only.
(2) Replacement caps are available for this device. Order Cat. No. 800F-AMP4.
(3) Available in illuminated only.

Green 800FM-MM43E3

(2)

Red

(3)

Amber

Green 800FM-LMM43E3

1

Red 800FM-LMM44E3

(3)

Blue

(3)

Clear

(1)

Black

Green 800FM-MP43E3

(2)

Red

(3)

Amber

Green 800FM-LMP43E3

1

Red

(3)

Blue

(3)

Clear

Cat. No.

800FM-MM42E3

800FM-MM44E3

800FM-LMM40E3

800FM-LMM46E3
800FM-LMM47E3

800FM-MP42E3

800FM-MP44E3

800FM-LMP40E3

800FM-LMP44E3
800FM-LMP46E3

800FM-LMP47E3

ab c def

Operator

Construction

Code Description Code Description Code Description Code Description Code Description Code Description

Round metal

operator

M

Type 4/13)

(1) LED module is required for illumination. Cannot use incandescent module.
(2) Available in illuminated only.
(3) Use of white LED is recommended.
(4) Available in non-illuminated only.

(IP66,

800F M – L MM 4 4 E3

abcdef

Operator Type Operator Function Cap Size Cap Color Positions

Blank Non-illuminated

L

Illuminated

(1)

MM

Momentary out,

Maintained center,

Momentary in

40 mm

4

plastic

0

2

Amber

Black

(2) (3)

(4)

E3 3-position

3 Green
4Red

Blue

Clear

(2) (3)

(2) (3)

6
7

MP

Momentary out,

Maintained center,

Maintained in

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 23

Bulletin 800F 22.5 mm Push Buttons Push-pull Operators

30.1

(1.19)

89.9

(3.54)

22

(0.87)

45 (1.77)

A

Approximate Dimensions — Push-pull Operators

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

90 mm Half Dome 90 mm Mushroom

26

(1.02)

89.8

(3.54)

Illuminated and Non-illuminated
Twist-to-release Operators
(30 mm, 40 mm, and 60 mm)

Illuminated and Non-illuminated
Push-pull Mushroom Operators
(30 mm, 40 mm, and 60 mm)

45 (1.77)

A

Illuminated and Non-illuminated Momentary

oom Operators (40 mm and 60 mm)

Mushr

Operator A

40 mm 39.8 (1.57)
60 mm 59.8 (2.35)

Operator A

30 mm 30 (1.18)
40 mm 40 (1.57)
60 mm 60 (2.36)

Mushroom Key Release Operator (40 mm)

45 (1.77)

40

(1.57)

72 (2.83)

24 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Bulletin 800F 22.5 mm Push Buttons Momentary Mushroom Push Buttons

40 mm Mushroom

Cat. No. 800FM-MM42

60 mm Mushroom

Cat. No. 800FP-MM63

90 mm Mushroom

Cat. No. 800FP-MM94

Momentary Mushroom Push Buttons

Non-illuminated

40 mm Mushroom 60 mm Mushroom 90 mm Mushroom

Color Package Quantity

Black

Green

Red 800FP-MM44 800FM-MM44 800FP-MM64 800FM-MM64 800FP-MM94 800FM-MM94

Yellow

Blue

1

Plastic Metal Plastic Metal Plastic Metal

Cat. No. Cat. No. Cat. No. Cat. No. Cat. No. Cat. No.

800FP-MM42 800FM-MM42 800FP-MM62 800FM-MM62 800FP-MM92 800FM-MM92
800FP-MM43 800FM-MM43 800FP-MM63 800FM-MM63 — —

800FP-MM45 800FM-MM45 800FP-MM65 800FM-MM65 800FP-MM95 800FM-MM95
800FP-MM46 800FM-MM46 800FP-MM66 800FM-MM66 — —

800F P – MM4 3

abc

abc

Operator Construction Size and Operator Type Color Cap

Code Description Code Type Code Color

P

M

(1) Only available with black, red, and yellow cap colors.

Round plastic operator

(IP69K; IP65, Type 4/4X/13)

Round metal operator

(IP65, Type 4/13)

MM4 40 mm momentary 2Black
MM6 60 mm momentary 3 Green

MM9

90 mm momentary

(1)

4Red
5 Yellow

6Blue

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 25

Bulletin 800F 22.5 mm Push Buttons Momentary Mushroom Push Buttons

40 mm Mushroom

Cat. No. 800FP-LMM43

22

(0.87)

Illuminated

Color Package Quantity

Green

Red

Yellow

Blue 800FP-LMM46 800FM-LMM46

Clear

1

800F P – LMM4 3

abc

40 mm Mushroom

Plasti

c Metal

Cat. No. Cat. No.

800FP-LMM43 800FM-LMM43
800FP-LMM44 800FM-LMM44
800FP-LMM45 800FM-LMM45

800FP-LMM47 800FM-LMM47

abc

Operator Construction Size and Operator Type Color Cap

Code Description Code Type Code Color

P

M

(1) When using LED for illumination, a white LED is recommended.

Round plastic operator

(IP69K; IP65, Type 4/4X/13)

Round metal operator

(IP65, Type 4/13)

LMM4 40 mm momentary 3 Green

Approximate Dimensions — Momentary Mushroom Push Buttons

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

Illuminated and Non-illuminated Momentary
Mushroom Operators (40 mm and 60 mm)

Operator A

40 mm 39.8 (1.57)
60 mm 59.8 (2.35)

90 mm Mushroom

89.8

(3.54)

26

(1.02)

4Red
5

6
7

Yellow

Blue

Clear

(1)

(1)

(1)

26 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Momentary Multi-operator

2-function Momentary Multi-operator Non-illuminated

Cat. No. 800FP-U2E4F3

(2)

2-function, Non-illuminated

Bulletin 800F 22.5 mm Push Buttons Momentary Multi-operator

Position A Position C

Color Type Text Color Type Text

Red Extended

Blank

Green Flush

OI

Blank

STOP START

800F P – U2 E 4 F 3 (with button caps)

abcdef

800F P – U2 X (with button caps)

abc

abc

Operator Construction Operator Type

Code Description Code Description Code Description

P

M

Round plastic operator

(IP69K; IP66, Type 4/4X)

Round metal operator

(IP66, Type 4)

U2 Two-function FFlush

def

Operator Color Cap/Text — Position A

(1)

Code Description Code Description Code Description

1White FFlush 1White
2Black E Extended 2Black
3 Green 3 Green
4Red 4Red
5Yellow 5 Yellow
6Blue 6Blue
A Green with “Start” text A Green with “Start” text
B Red with “Stop” text B Red with “Stop” text
C White with “Start” text C White with “Start” text
D Black with “Stop” text D Black with “Stop” text
E Green with “I” text E Green with “I” text
F Red with “O” text F Red with “O” text
G White with “I” text G White with “I” text
H Black with “O” text H Black with “O” text

(1) Valid color cap/legend text codes shown in Table 17.
(2) Position 1 of the latch (left position when viewed from the back) corresponds to position A of the operator. Position 2 of the latch (right position when

viewed from the back) corresponds to position C of the operator.

(3) For custom-engraved caps, consult your local Rockwell Automation sales office or Allen-Bradley distributor.

Package
Quantity

800FP-U2E4F3

1

800FP-U2EFFE
800FP-U2EBFA

Operator Type — Position C

Plastic

Cat. No.

(2)

Operator Type — Position A

(2)

E Extended
X

No caps (all positions)

(3)

Operator Color Cap/Text — Position C

(1)

Table 17 - Cap/Legend Text

Color

White START, I —
Black — STOP, O
Green START, I —

Red — STOP, O

Flush Caps Extended Caps

Tex t

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 27

Bulletin 800F 22.5 mm Push Buttons Momentary Multi-operator

2-function Momentary Multi-operator Illuminated

Cat. No. 800FP-LU2E2E1

(3)

2-function, Illuminated

Position A Position B Position C

Color Type Text Type Color Type Text

Red Extended

Blank

White Pilot

OI800FP-LU2EFFE

Light

Green Flush

Blank

STOP START

800F P – LU2 E 4 F 3 (with button caps)

abcdef

800F P – LU2 X (with button caps)

abc

abc

Operator Construction

Code Description Code Description Code Description

P

M

Round plastic operator

(IP69K; IP66, Type 4/4X)

Round metal operator

(IP66, Type 4)

LU2 Two-function Illuminated FFlush

def

Operator Color Cap/Text — Position A

(1)

Operator Type — Position C

Code Description Code Description Code Description

1White FFlush 1White
2Black E Extended 2Black
3 Green 3 Green
4Red 4Red
5Yellow 5 Yellow
6Blue 6Blue
A Green with “Start” text A Green with “Start” text
B Red with “Stop” text B Red with “Stop” text
C White with “Start” text C White with “Start” text
D Black with “Stop” text D Black with “Stop” text
E Green with “I” text E Green with “I” text
F Red with “O” text F Red with “O” text
G White with “I” text G White with “I” text
H Black with “O” text H Black with “O” text

(1) Valid color cap/legend text codes shown in Table 18.
(2) LED module is required for illumination, cannot use incandescent module.
(3) Position 1 of the latch (left position when viewed from the back) corresponds to position A of the operator. Position 2 of the latch (right position when

viewed from the back) corresponds to position C of the operator. Position 3 of the latch (center position) is reserved for the power module.

(4) For custom-engraved caps, consult your local Rockwell Automation sales office or Allen-Bradley distributor.

Pkg.
Qty.

1

Operator Type

Plastic

Cat. No.

800FP-LU2E4F3

800FP-LU2EBFA

(2)

(3)

Operator Type — Position A

(3)

E Extended
X

No caps (all positions)

(4)

Operator Color Cap/Text — Position C

(1)

Table 18 - Cap/Legend Text

Color

White START, I —
Black — STOP, O
Green START, I —

Red — STOP, O

28 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Flush Caps Extended Caps

Tex t

3-function, Non-illuminated

3-function Momentary Multi-operator Non-illuminated

Cat. No. 800FP-U3E4F34

Bulletin 800F 22.5 mm Push Buttons Momentary Multi-operator

Position A Position B Position C

Pkg.

Color Type Text Color Type Text Color Type Text

Green Flush Blank Red Extended Blank Green Flush Blank 1

Qty.

Plastic

Cat. No.

800FP-U3F3F34

800F P – U3 E 4 F 3 4 (with button caps)

abcdefg

800F P – U3 X (with button caps)

abc

abc

Operator Construction Operator Type

Operator Type — Position A

(2)

Code Description Code Description Code Description

P Round plastic operator (IP69K; IP66, Type 4/4X) U3 Three-function FFlush
M Round metal operator (IP66, Type 4) E Extended

X

No caps (all positions)

(3) (4)

d

Operator Color Cap/Text — Position A

Code Description

(1)

Operator Type — Position C

ef

(2)

Operator Color Cap/Text — Position C

(1)

1White Code Description Code Description
2Black FFlush 1White
3 Green E Extended 2Black
4Red 3 Green
5 Yellow 4Red
6Blue 5 Yellow
A Green with “Start” text 6Blue
B Red with “Stop” text A Green with “Start” text
C White with “Start” text B Red with “Stop” text
D Black with “Stop” text C White with “Start” text
E Green with “I” text D Black with “Stop” text
F Red with “O” text E Green with “I” text
G White with “I” text F Red with “O” text
H Black with “O” text G White with “I” text

H Black with “O” text

g

Operator Color Cap/Text — Position B

(2) (4)

Code Description

4Red
B Red with “Stop” text
F Red with “O” text

(1) Valid color cap/legend text codes shown in Table 19.
(2) Position 1 of the latch (left position when viewed from the back) corresponds to position A of the operator. Position 2 of the latch (right position when viewed from the back) corresponds

to position C of the operator. Position 3 of the latch (center position) corresponds to position B of the operator.
(3) For custom-engraved caps, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
(4) For “no caps” option, (position B) center cap available as red, no text only.

Table 19 - Cap/Legend Text

Color

Flush Caps Extended Caps

White START, I —
Black — STOP, O
Green START, I —

Red — STOP, O

Tex t

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 29

Bulletin 800F 22.5 mm Push Buttons Momentary Multi-operator

17.5

(0.69)

49.6

(1.95)

12.8
(0.5)

Approximate Dimensions — Momentary Multi-operator

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

Illuminated and Non-illuminated
2-position Multi-func

49.6

(1.95)

tion Operators

16.8

(0.66)

12.8
(0.5)

Non-illuminated
3-position Multi-function Operators

30 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Bulletin 800F 22.5 mm Push Buttons Reset Operators

Reset Operator

Cat. No. 800FP-R611

Threaded Reset Rod with 35 mm Pusher

Cat. No. 800F-ATR19L

29.6

(1.17)

4.5

(0.18)

50…340 (1.97…13.39)

Reset Operators

Mechanical and/or Electrical Reset

Flush — Round

Button Color Legend Text Pkg. Quantity

Blue

abcd

Operator Construction Operator Type Color Cap Legend Text

Code Description Code Type Code Color Code Text

P

M

(1) Accepts latch and up to four single-circuit contact blocks or two dual-circuit contact blocks; no contacts are allowed in center position.
(2) 11 mm (0.4 in.) reset stroke length.

Round plastic operator

(IP66, Type 4/4X/13)

Round metal operator

(IP66, Type 4/13)

R

No legend 800FP-R6 800FM-R6

800F M – R 6 11

R

Reset

1

abcd

(1) (2)

1White Blank No text

2Black 11 R
6Blue

astic Metal

Pl

Cat. No. Cat. No.

800FP-R611 800FM-R611

Threaded Reset Rod Reset Operators

Rod Length Adjustability [mm

Rod Length [mm (in.)]

40 (1.6) 34…52 (1.3…2.1)

55 (2.2) 50…67 (2.0…2.6)
85 (3.4) 80…98 800F-ATR04 800F-ATR04L
115 (4.5) 110…128
145 (5.7) 141…159

315 (12.4) 34…326

(1) If contact blocks are used, they must have a minimum rod length of 55 mm for one level of contact blocks and 85 mm for two levels of contact blocks.
(2) Rod is threaded along its entire length for ease of cutting to desired length.

(1)

(in.)]

Pkg. Quantity

1

10 mm Pusher 35 mm Pusher

Cat. No. Cat. No.

800F-ATR01 800F-ATR01L
800F-ATR02 800F-ATR02L

800F-ATR06 800F-ATR06L
800F-ATR08 800F-ATR08L

800F-ATR19

Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

Reset Operators with Reset Rod

Threaded Reset Rod

(2)

800F-ATR19L

(2)

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 31

Bulletin 800F 22.5 mm Push Buttons Single-turn Potentiometer Assembly

29.6 (1.17)

22.5

(0.86)

Single-turn Potentiometer Assembly

Resistive Element

None (Operator Only)

(1) (2) (3)

(5)

Series B Cat. No.

Series A Cat. No.

800FP-POT 800FP-POTA

(4)

150  800FP-POT1 800FP-POT1A

500 

800FP-POT2 800FP-POT2A

1000  800FP-POT3 800FP-POT3A
2500 
5000 

800FP-POT4 800FP-POT4A
800FP-POT5 800FP-POT5A

10,000  800FP-POT6 800FP-POT6A

(1) Rated 300V AC/DC, 2 W max.
(2) A latch is not needed.
(3) Additional hole spacing required for potentiometers. See Instruction Sheet
(4) Not stocked. Longer leadtime.
(5) The catalog number 800FP-POT is a complete operator assembly supplied without the resistive element, used with potentiometers having a shaft diameter of 6.0 mm (0.23 in.) and a shaft

length of 50.0 mm (1.97 in.), or a shaft diameter of 6.4 mm (0.25 in.) and a shaft length of 22.5 mm (0.88 in.). This operator is used with Type J potentiometers only.

on page 47 for panel hole spacing requirements.

Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

32 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Key-operated Selector Switch — SensEject

2-position

Switching Angle

3-position

Switching Angle

29.6

(1.17)

21.2

(0.83)

47.1

(1.85)

SensEject™ — patented spring-loaded key ejection system

Bulletin 800F 22.5 mm Push Buttons Key-operated Selector Switch — SensEject

Operator

Construction

Operator Type Key Eject Position

Key Option

2-position spring

Round metal operator

— SensEject is IP6X

(dust-tight) Type 1

(1) Not intended for high security applications. Interoperability is possible with certain key/cylinder lock combinations. Consult your local Rockwell Automation sales office or Allen-Bradley

distributor for interoperability information.

(2) Includes latch and spacer block.

return from right

3-position spring

return from both

Left with key eject

Center with key eject

(1)

Spare Key Cat. No. Contact Blocks

Ronis key 800F-AKE006

Ronis key 800F-AKE001

Cat. No.

None 800FM-KEM2106R

1 N.O., 1 N.C.

None

2 N.O., 3 N.C.

800FM-KEM2106ZMX11

800FM-KEB3401R

800FM-KEB3401RMX23

(2)

Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 33

Bulletin 800F 22.5 mm Push Buttons Selector Push Button Operators

Selector Jog Operator

Cat. No. 800FM-SJ23

21.8

(0.86)

30

(1.18)

Selector Push Button Operators

Table 20 - Target Table and Operator Position (2-position)

Contact Type

N.O.

N.C.

(1)

Position on Mounting

Latch

Selector Left Free Selector Left Depressed Selector Right Free Selector Right Depressed

Left O X O O

RightOOOX

CenterOXOX

Left X O X X

Right X X X O

Center X O X O

Table 21 - Target Table and Operator Position (3-position)

Position on

N.O.

N.C.

(1)

Mounting Latch

Selector Left Free

LeftOXOXOO

Right O O O X O X

CenterOXOXOX

LeftXOXOXX

Right X X X O X O

CenterXOXOXO

Selector Left

Depressed

Selector Center

Free

Selector Center

Depressed

Selector Right

Contact Type

(1) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.

Note: X = Closed / O = Open

Free

Selector Right

Depressed

800F P – SJ 2 2

abcd

abcd

Operator Construction Operator Type Operator Function

Code Description Code Description Code Description Code Description

P

M

(1) Buttons cannot be engraved.

Round plastic operator

(IP66, Type 4/4X/13)

Round metal operator

(IP66, Type 4/13)

SJ Selector jog 22-position 2Black

3 3-position 3 Green

Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

34 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Color Cap

(1)

Toggle Switch Operators

Toggl e Switch Operato r

Cat. No. 800FM-JM2

73 (2.87)

32

(1.26)

Table 22 - Target Table and Operator Position (2-position)

Bulletin 800F 22.5 mm Push Buttons Toggle Switch Operators

Contact Type

(2)

Position on

Mounting Latch

Toggle Left Center Toggle Right

Left O O X

N.O.

Right X O O

Center X O X

Left X X O

N.C.

Right O X X

Center O X O

Table 23 - Target Table and Operator Position (4-position)

Contact Type

(2)

Position on

Mounting Latch

Toggle Up Toggle Left Center Toggle Right Toggle Down

(1)

LeftXOOOO

N.O.

RightOXOOO

CenterXXOOO

LeftOXXXX

N.C.L.B.

RightXOXXX

CenterOOXXX

N.C.E.B.

(1) Must use N.O., N.C.E.B., or N.C.L.B. contact blocks only. Cannot use N.C. or N.O.E.M. contact blocks with 4-position toggle switch.
(2) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.
Note: X = Closed / O = Open

LeftOOOOX

RightOOOXO

800F M – J M2

abc

abc

Operator Construction Operator Type Operator Function

Code Description Code Description Code Description

J

M

(1) Use legend plates 800F-34_ and 800F-35_.
(2) Silicone boot comes standard with toggle switch, consult your local Rockwell Automation sales office or Allen-Bradley distributor for

replacement boots.

Round metal operator

(IP66, Type 4/13)

Toggle switch

Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 35

(1) (2)

M2 2-position, maintained
R2 2-position, momentary

M4 4-position, maintained
R4 4-position, momentary

Bulletin 800F 22.5 mm Push Buttons Back-of-panel Components

Back-of-panel Components

Contact Blocks with Latch — Composite

800F – P X 0 1 E

abcde

abcd

Style

Contact Block Termination Style

Code Description Code Description Code Description Code Description

PPlastic latch X Screw termination 0No contact 0No contact

MMetal latch Q Spring-clamp termination 11 N.O. 11 N.C.

e

Specialty Contact Block

Code Description

Blank Standard blocks

V

Low-voltage —

QuadConnect™
E N.O. early make
L N.C. late break
B N.C. early break
S N.C. self-monitoring

(1) Six circuits maximum allowable.

(1)

N.O. (Normally Open) Circuits N.C. (Normally Closed) Circuits

22 N.O. 22 N.C.
33 N.O. 33 N.C.
44 N.O. 44 N.C.
55 N.O. 55 N.C.
66 N.O. 66 N.C.

Power Modules with Latch — Composite

800F – M N 3 G

abcd

abcd

Style

Power Module Type

Code Description Code Description Code Description Code Description

P Plastic latch
M Metal latch 1

(1) LED modules for use with all illuminated operators. Incandescent module for use with pilot lights, momentary push buttons, and momentary mushroom operators only.
(2) Four circuits maximum allowable when power module is used. Contact blocks cannot be stacked on power module.
(3) Only available for incandescent module.
(4) Only available for integrated LED module.
(5) For best illumination results, LED color should match lens color. For yellow operator, select a white LED.

Incandescent module,

D

N

Q

screw termination

Integrated LED module,

screw termination

Integrated LED module,

springclamp termination

(1) (2)

Vol tag e

0

2

No bulb

6V AC/DC

12V AC/DC

(3)

(3)

(3)

Lamp Color

CIncandescent
RRed LED

G Green LED
324V AC/DC WWhite LED
4

48V AC/DC

(3)

5120V AC
7

240V AC

(4)

(5)

36 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Bulletin 800F 22.5 mm Push Buttons Back-of-panel Components

Cat. No. 800F-ALM

Cat. No. 800F-ALP

Power Modules with Contact Blocks and Latch — Composite

800F – P N 5 R X 1 0 E

abcdef gh

abcd

Style

Power Module Type

Code Description Code Description Code Description Code Description

P Plastic latch
M Metal latch 1

Incandescent module,

D

screw termination

Integrated LED module,

N

screw termination

Integrated LED module,

Q

spring-clamp termination

efgh

Contact Block Termination Style N.O. (Normally Open) Circuits N.C. (Normally Closed) Circuits Specialty Contact Block

Code Description Code Description Code Description Code Description

X Screw termination 0No contact 0No contact Blank Standard blocks

Q Spring-clamp termination 11 N.O. 11 N.C. V

22 N.O. 22 N.C. E N.O. early make
33 N.O. 33 N.C. L N.C. late break
44 N.O. 44 N.C. B N.C. early break

(1) Four circuits maximum allowable when power module is used. Contact blocks cannot be stacked on power module.
(2) LED modules for use with all illuminated operators. Incandescent module for use with pilot lights, push buttons, and momentary mushroom operators only.
(3) Only available for incandescent module.
(4) Only available for integrated LED module.
(5) For best illuminated results, LED should match lens color. For yellow operator, select a white LED.

(1) (2)

Vol tag e

0

2

No bulb

6V AC/DC

12V AC/DC

(3)

(3)

(3)

Lamp Color

CIncandescent
RRed LED

G Green LED
324V AC/DC WWhite LED
4

48V AC/DC

(3)

5120V AC
7

240V AC

(4)

S N.C. self-monitoring

(5)

Low-voltage —
QuadConnect™

Other Back-of-panel Components

Table 24 - Latches

Description Pkg. Qty. Cat. No.

Metal Mounting Latch
Zinc-plated, metal die cast mounting latches.
Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.

Note: Sold only in multiples of 100. Order (quantity of) 100 to receive one package of 100 pieces. 100

Plastic Mounting Latch
Note: Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.

Note: Sold only in multiples of 100. Order (quantity of) 100 to receive one package of 100 pieces. 100 800F-ALP-BP

10

800F-ALM

800F-ALM-BP

10

800F-ALP

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 37

Bulletin 800F 22.5 mm Push Buttons Back-of-panel Components

Cat. No. 800F-X10

Cat. No. 800F-BX01

Cat. No. 800F-D3C

Table 25 - Contact Blocks

Description Contact Type Pkg. Qty. Cat. No.

Contact Block
Note: Sold only in multiples of 10. Order (quantity
of) 10 to receive one package of 10 pieces. Latch
not included.

Note: Sold only in multiples of 100. Order (quantity
of) 100 to receive one package of 100 pieces.
Latch not included.

N.O.
N.C.

800F-X10

800F-X01
N.O. low-voltage — QuadConnect 800F-X10V
N.C. low-voltage — QuadConnect

N.O.L.M.

800F-X01V

800F-X10N

N.O.E.M. 800F-X10E

N.O.E.E.M.

800F-X10M

N.C.L.B. 800F-X01L
N.C.E.B.

Self-Monitoring
Dual-circuit of 2 N.O.
Dual-circuit of 2 N.C.

Dual-circuit of 1 N.O.-1 N.C.

10

800F-X01B
800F-X01S
800F-X20D
800F-X02D

800F-X11D
N.O. spring-clamp 800F-Q10
N.C. spring-clamp

Ring lug N.O.
Ring lug N.C.

N.O.
N.C. 800F-X01-BP

100

800F-Q01
800F-R10
800F-R01

800F-X10-BP

(1)

(2)

(3)

(4)

(4)

(4)

(4)

(5) (6)

(5) (6)

Base Mounted Contact Block
Base mounted contact blocks can be used in
plastic or metal enclosures.
Note: Sold only in multiples of 10. Order (quantity
of) 10 to receive one package of 10 pieces. Latch
not included.

(1) For use with Cat. No. 800FP-CB_ and Cat. No. 800FP-CC_ operators.
(2) For use with Cat. No. 800FP-CC_ operators.
(3) Only for use with 4-position selector switch, 4-position toggle switch, or 3-position push-pull operator.
(4) Cannot stack.
(5) Cannot be used in a composite catalog number.
(6) Replacement screws are available (Cat. No. 800F-ARS1

Table 26 - Power Modules

Description Voltage Pkg. Qty. Cat. No.

Incandescent Module
For use with pilot lights, push buttons, and momentary mushroom
operators.
Note: Sold in multiples of 10. Order (quantity of) 10 to receive one
package of 10 pieces. Latch not included.

N.O.

800F-BX10

10

N.C. 800F-BX01

No bulb

800F-D0C

6V AC/DC 800F-D1C
12V AC/DC
24V AC/DC

10

800F-D2C
800F-D3C

48V AC/DC 800F-D4C

120V AC/DC

800F-D5C

38 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Bulletin 800F 22.5 mm Push Buttons Back-of-panel Components

Cat. No. 800F-N3G

Cat. No. 800F-BN3R

Table 26 - Power Modules (Continued)

Description Voltage Pkg. Qty. Cat. No.

24…120V AC/DC

24V AC/DC

Integrated LED Module

r use with all illuminated devices. For best results, LED should

Fo
match lens color. For amber, yellow, and blue operators use white LED.
Note: Sold in multiples of 10. Order (quantity of) 10 to receive one
package of 10 pieces. Latch not included.

Base Mounted Integrated LED Module
Base mounted modules can be used in plastic or metal enclosures. For
best illumination results, LED should match lens color.
Note: Sold in multiples of 10. Order (quantity of) 10 to receive one
package of 10 pieces. Latch not included.

(1) To complete the cat. no., replace the x with one of the following letters for the desired color: R = Red, G = Green, W = White.
(2) Cannot be used in a composite catalog number.
(3) Replacement screws are available (Cat. No. 800F-ARS1)

120V AC

240V AC

24V AC/DC spring-clamp

120V AC spring-clamp
240V AC spring-clamp

24V AC/DC ring lug

24V AC/DC

120V AC

240V AC

800F-N3x
800F-N5x
800F-N7x
800F-Q3x
800F-Q5x
800F-Q7x

(1) (2) (3)

800F-BN3x
800F-BN5x

(1) (2)

(1)

(1)

(1)

(1)

(1)

(1)

(1)

(1)

800F-NUx

10

800F-R3x

10

800F-BN7x

(1)

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 39

Bulletin 800F 22.5 mm Push Buttons Back-of-panel Components

45.7 (1.8)

45.7 (1.8)
23 (0.91)

33

(1.3)

68.7 (2.7)

23.1

(0.91)

46

(1.81)

40

(1.57)

Approximate Dimensions — Back-of-panel Components

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

Incandescent Module with Latch LED Module with Latch

45.7 (1.8)

ntact Cartridges with Latch

Co

Dual-circuit Contact Block or Selfmonitoring Contact Block
(1 Deep, Max)

Potentiometer with Resistive Element Customer Supplied Resistive Element

a

b

a

(Dia.)

b

(Length)24(0.945)32(1.26)14(0.551)

46 (1.81)

68.7 (2.7)

Max. Min.

6.4

(0.252)

(0.232)

5.9

33

(1.3)

5.7

(0.224)

40 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Plastic and Metal Enclosures

Cat. No. 800F-3PM

Cat. No. 800F-5MM

Plastic Enclosure (Latch/Base Mount)

• Accepts two-piece snap-in legends

• One-hole enclosure accepts 60 mm E-stop legends

• UL Listed and CSA Certified

Metal Enclosure (Latch/Base Mount)

•Feed-through design

• Accepts two-piece snap-in legends

• Includes base mount adapter

Type Pkg. Qty,

PG Conduit Knockouts Metric Conduit Knockouts PG Conduit Openings Metric Conduit Openings

Plastic (IP69K

Cat. No. Cat. No. Cat. No. Cat. No.

1-hole
2-hole
3-hole
4-hole
5-hole
6-hole

1-hole (yellow)

800F-1PP
800F-2PP
800F-3PP
800F-4PP

1

800F-6PP

(2) (3)

(2) (3)

(2) (3)

(2) (3)

— —

(2) (6)

800F-1YP

(2)

1-hole (yellow) latch only — —

1-hole (yellow) dual-circuit

(1) Select enclosures; see Table 2 on page 4.
(2) Can only use single deep contact block.
(3) Knockouts: PG (PG11/16), Metric (M16/20)
(4) Openings: PG (PG16), Metric (M20)
(5) Openings: PG (PG16), Metric (M32)
(6) Knockouts: PG (PG16), Metric (M25)
(7) Can stack contact blocks two deep or one dual-circuit contact block.

800F-1YPD

(7)

(1)

; IP66, 4/4X)

800F-1PM
800F-2PM
800F-3PM
800F-4PM

800F-6PM

800F-1YM

800F-1YMD

Bulletin 800F 22.5 mm Push Buttons Plastic and Metal Enclosures

Enclosures

Metal — Die Cast (IP66, 4/13)

(2) (3)

(2) (3)

(2) (3)

(2) (3)

(2) (6)

(2)

(7)

800F-1MP
800F-2MP
800F-3MP

800F-5MP

800F-1MYP

800F-1LYP

(4)

(4)

(4)

800F-1MM
800F-2MM
800F-3MM

— —

(5)

800F-5MM

— —

(4)

(4)

800F-1MYM
800F-1LYM

— —

(4)

(4)

(4)

(5)

(4)

(4)

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 41

Bulletin 800F 22.5 mm Push Buttons Assembled Stations

Cat. No. 800F-1YP4

Assembled Stations

Enclosure Material Operator Type Illumination Voltage Contact Configuration

1 N.C.

1-hole, Yellow Plastic Red 90 mm momentary

Black 90 mm momentary 1 N.O./1 N.C.

Black Push Button 1 N.O.

1-hole, Gray Plastic

2-hole, Gray Plastic

3-hole, Gray Plastic

“0-1” 2-Position Selector

Switch

“OFF-ON” 2-position

Selector Switch

↔ (Flush Black) 1 N.O.

Start and Stop Push

Buttons

↑ (Flush Black)

O (Extended Red)

↓ (Flush Black)

Non-illuminated

1 N.O./1 N.C. 800F-1YP2M94 800F-1YM2M94

2 N.C.

1 N.O. 800F-1PP2 800F-1PM2

1 N.O. / 1 N.C.

1 N.O./1 N.C. 800F-2PP1 —

4 N.O./1 N.C.

1-Hole Enclosure E-Stop Station

PG Knockouts Metric Knockouts

Cat. No. Cat. No.

800F-1YP1M94 800F-1YM1M94

800F-1YP3M94 800F-1YM3M94
800F-1PP2M92 800F-1PM2M92

800F-1PP1 800F-1PM1

800F-1PP3 800F-1PM3

800F-1PP4 —

800F-3PP1 —

Table 27 - Yellow Plastic Enclosure

Quick Connect Operator Type Illumination Voltage Contact Configuration

N/A

Twist-to-Release

40 mm

Key Release

40 mm

Twist-to-Release

60 mm

Twist-to-Release

40 mm

Red half dome

Non-illuminated

24V AC/DC

120V AC

240V AC

Non-illuminated

24V AC/DC

120V AC

240V AC

1 N.O./1 N.C.

1 N.O. / 1 N.C.

1 N.O. / 2 N.C.

1 N.O./1 N.C.

PG Knockouts Metric Knockouts

Cat. No. Cat. No.

1 N.C.

2 N.C. 800F-1YP3 800F-1YM3

1 N.C.

2 N.C. 800F-1YP6 800F-1YM6
2 N.C.

1 N.C.

1 N.C.

2 N.C.

1 N.C.

800F-1YP1 800F-1YM1

800F-1YP2 800F-1YM2

800F-1YP4 800F-1YM4
800F-1YP5 800F-1YM5

800F-1YP7 —
800F-1YP8 —

— 800F-1YML1
— 800F-1YML2
— 800F-1YML3

800F-1YP1HD 800F-1YM1HD
800F-1YP2HD 800F-1YM2HD
800F-1YP3HD 800F-1YM3HD

— 800F-1YML1HD
— 800F-1YML2HD
— 800F-1YML3HD

42 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Table 27 - Yellow Plastic Enclosure

Bulletin 800F 22.5 mm Push Buttons Assembled Stations

Quick Connect Operator Type Illumination Voltage Contact Configuration

AC Micro

DC Micro

Mini Receptacle

5-pi

n

6-pin 1 N.O. / 2 N.C.

4-pin

Twist-to-Release

40 mm

5-pin Non-illuminated 2 N.C. — 800F-1YMQ3V

4-pin

6-pin

Non-illuminated

Non-illuminated/EMO/

Guard

Non-illuminated

Non-illuminated/EMO/

Guard

Non-illuminated 1 N.C.

24V AC/DC 1 N.O. / 1 N.C.
24V AC/DC 1 N.O./1 N.C. — 800F-1YMQ4

120V AC 1 N.O. / 1 N.C.

240V AC 1 N.O. / 1 N.C.

2 N.C. — Low-voltage

1 N.O. / 1 N.C.

Table 28 - Gray Metal Enclosure

Quick Connect Operator Type Illumination Voltage Contact Configuration

Twist-to-Release

40 mm

N/A

Key Release

40 mm

Non-Illuminated

Non-Illuminated

1 N.O. / 1 N.C. — 800F-1MM2

1 N.O. / 1 N.C. — 800F-1MM5

PG Knockouts Metric Knockouts

Cat. No. Cat. No.

— 800F-1YMQ53V
— 800F-1YMQA

1 N.C.

1 N.C. — 800F-1YMQ1

2 N.C.

2 N.C.

1 N.C.

2 N.C.

1 N.C.

2 N.C.

— 800F-NX1

— 800F-1YMQ2
— 800F-1YMQ3

— 800F-1YMQ3VEG

— 800F-1YMQ41
— 800F-1YMQ44

— 800F-1YMQ5
— 800F-1YMQ6

PG Knockouts Metric Knockouts

Cat. No. Cat. No.

— 800F-1MM1

— 800F-1MM3
— 800F-1MM4

— 800F-1MM6

Table 29 - Yellow Metal Enclosure

Quick Connect Operator Type Illumination Voltage Contact Configuration

(1)

Mini Receptacle

(1) See Assembled Station Pin Out Chart on page 64.

6-pin

Twist-to-Release

40 mm

24V AC/DC 1 N.O./1 N.C. — 800F-1MYMQ4

120V AC 1 N.O./1 N.C. — 800F-1MYMQ5

240V AC 1 N.O./1 N.C.

PG Knockouts Metric Knockouts

Cat. No. Cat. No.

— 800F-1MYMQ6

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 43

Bulletin 800F 22.5 mm Push Buttons Assembled Stations

Hole
4

Hole
3

Hole
2

Hole
1

Hole 1

Hole 2

4-hole Assembled Station

Cat. No. 800F-VHA3A4J3J4J

Assembled Stations with DeviceNet

2-hole

800F –

abcdcde

(Hole 1 c+d) (Hole 2 c+d)

3-hole

800F –

abcdcdcde

(Hole 1 c+d) (Hole 2 c+d) (Hole 3 c+d)

4-hole

800F –

abcdcdcdcde

(Hole 1 c+d) (Hole 2 c+d) (Hole 3 c+d) (Hole 4 c+d)

acde

Mounting Orientation Operator Types Color/Text

Code Description Code Description Code Description Code Description

V

Vert ical

(1)

A Non-illuminated flush button 1White Blank No external I/O

H Horizontal B Non-illuminated extended button 2Black A 1 input/1 output (sinking)

C Non-illuminated guarded button 3 Green B 1 input/1 output (sourcing)

b D

Enclosure Style/Legends

Code Description F

A 2-hole/legend frames
B 3-hole/legend frames 8

C 4-hole/legend frames
D 2-hole/no legend frames 0Amber

Illuminated flush button

E

Illuminated extended button

Illuminated guarded button

G

H

Non-illuminated

2-position selector switch

Non-illuminated

3-position selector switch

(3)

(3)

(3)

4Red C 2 input
5 Yellow E 2 output (sourcing)
6Blue F

7Clear G

(7)

Gray

9No cap K 2 input/2 output (sourcing)

E 3-hole/no legend frames J Pilot light (diffused) A Green with “Start” text

F 4-hole/no legend frames K

2-hole/E-stop only

H

no legend frames

(2)

Hole plug

L

Non-illuminated TTR E-stop

M

Non-illuminated push-pull

(4)

(4) (5)

(4) (5)

B Red with “Stop” text
C Black with “” symbol
D Black with “” symbol

N 2-position key selector switch E Black with “” symbol
P 3-position key selector switch F Black with “” symbol

R

T
U

Non-illuminated

40 mm mushroom

E-stop key release

Potentiometer

(4) (5)

(5) (6)

W Illuminated push-pull

X

Y

Illuminated 2-position

maintained selector switch

Illuminated 3-position

maintained selector switch

G Green with “I” symbol
H Red with “O” symbol Q

L Blue with “R” text R

M

N

Red with yellow

metal guard

Yellow with yellow

metal guard

(8)

(8)

Z Illuminated 40 mm mushroom

(1) Selector Switches in a vertical mount enclosure are mounted with a horizontal orientation.
(2) Enclosure Style/Legend option H from Table b can only select one operator from Table c. Valid options are L, M, and T. Also see footnote 5.
(3) Cannot be ordered with “No Cap” (Code 9 from Table d - Color/Text).
(4) Operator Types K, L, M, T, and U from Table c are not available with legend frames.
(5) Operator Types L, M, and T from Table c can be used as emergency stops. To be valid as an E-stop, operators must use color/text code 4 from Table d and it must be placed in the

last hole position in the enclosure, where a yellow round E-stop legend plate is provided. An E-stop connector must also be chosen from Table e
(6) A potentiometer is allowed in first hole position only.
(7) Available in flush only.
(8) Only available with non-illuminated push-pull operator (Code M from Table c).
(9) This is an 8-in/4-out device. 2-in and 1-out are assigned to each hole position in the enclosure. If a 2-hole enclosure is selected, 4-in and 2-out are assigned internally and up to 4

unassigned I/O points can be assigned to external connectors. This device contains up to two physical external I/O connectors. The “+” symbol in the Description field of table e

indicates that two external connectors exist. If an E-stop connector is used, 2 unassigned I/O points can be assigned to the other connector.
(10) External I/O Versions F, L, M, Q, and U receive only one contact block for the external E-stop string. These connectors are rated 3 A. If more than 3 A of current is needed or if there

are two E-stop strings, use External I/O Versions G, N, P, R, and W. These versions receive two contact blocks. This configuration allows for 6 A of switching or for two E-stop strings.

External I/O Version

1 E-stop block

2 E-stop block

H 2 input/2 output

1 input/1 output (sinking)

L

M

N

P

+ 1 E-stop block

1 input/1 output (sourcing)

+ 1 E-stop block

1 input/1 output (sinking)

+ 2 E-stop block

1 input/1 output (sourcing)

+ 2 E-stop block

2 input + 1 E-stop block

2 input + 2 E-stop block

U

W

X

2 output (sourcing)
+ 1 E-stop block

2 output (sourcing)

+ 2 E-stop block

2 input + 1 input/1 output

(sinking)

. Also see footnote 10.

(9)

(10)

(10)

(10)

(10)

(10)

(10)

(10)

(10)

(10)

(10)

44 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Pendant Stations

Pendant Station

Cat. No. 800F-P25

Pendant Station

Cat. No. 800F-PN2

Latch Mounting

• Blank legend cap marking

• Connector not included. See Miscellaneous

Bulletin 800F 22.5 mm Push Buttons Pendant Stations

on page 48 for ordering information.

Type Pkg. Quantity

1 hole in face

2 holes in face 800F-P25

1 hole in bottom

1 hole in face / 1 hole in bottom

(1) Only use with single-deep contact block.

1

Assembled Two-Hole Pendant Stations

Table 30 - Prewired Pendant Station with Mini Quick Disconnect Connector

Push Button and Contact Selection

Green flush (no text) in face with 1 N.O. contact;

Red pilot light in bottom with 1 N.O. contact; 24V AC/DC

White flush (with up arrow — ↑) with 1 N.O./1 N.C. contact;

Black flush (with down arrow — ↓) with 1 N.O./1 N.C. contact

Black flush (with “Forward” text) with 1 N.O./1 N.C. contact;

Black flush (with “Reverse” text) with 1 N.O./1 N.C. contact

Black flush (with “On” text) with 1 N.O. contact;

Black flush (with “Off” text) with 1 N.C. contact

Green flush (with “Start” text) with 1 N.O. contact;

Red flush (with “Stop” text) with 1 N.C. contact

2 flush black push buttons (no text), each with 1 N.O. contact

(1) Connector is a 4-pin mini male.
(2) Only use with single-deep contact block.

Yellow Plastic (IP66, 4/4X/13)

Cat. No.

800F-P15

800F-P35
800F-P45

(1)

Cat. No.

800F-PN2

800F-P251

800F-P252

800F-P253

800F-P254

800F-P255

(1)

(2)

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 45

Bulletin 800F 22.5 mm Push Buttons Pendant Stations

L

W

D

D

9

(0.35)

149

(5.87)

60

(2.36)

62 (2.44)

81 (3.19)

D

D

Approximate Dimensions — Enclosures

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

Plastic Enclosures

Cat. No. Holes A B C D

(2)

800F-1P

(2)

800F-1Y

(2)

800F-1Y

(1) Mounting screw — pan head with diameter ≤ 7 mm (0.28 in.).
(2) P = PG conduit holes or M = Metric conduit holes

800F-2P

800F-3P

800F-4P

800F-6P

D

(2)

(2)

(2)

(2)

(1)

Mounting Holes

85

89

1

(3.35)

85

1

(3.35)

124

2

(4.88)

155

3

(6.1)

186

4

(7.32)

248

6

(9.76)

(3.5)

89

(3.5)

79

(3.11)

79

(3.11)

79

(3.11)

87

(3.43)

58

(2.28)

74

(2.91)

58

(2.28)

58

(2.28)

58

(2.28)

64

(2.52)

—

—

31

(1.22)

31

(1.22)

31

(1.22)

31

(1.22)

58

(2.28)

58

(2.28)

48 (1.89)

48 (1.89)

48 (1.89)

55 (2.17)

Pendant Stations

Note: Cable opening = 21.2 mm (0.83 in.) diameter

WL

59

(2.32)

65

(2.56)

102.5

(4.04)

133

(5.24)

164.5

(6.48)

224

(8.82)

Metal Enclosures

Mounting

Cat. No. Holes A D

Holes

L

(1)

800F-1M

(1)

800F-2M

(1)

800F-3M

(1)

800F-5M

(1) P = PG conduit holes or M = Metric conduit holes

1 99 (3.9) — 62 (2.44)
2 137 (5.39) 37.5 (1.48) 100 (3.94)
3 147 (5.79) 37.5 (1.48) 137 (5.39)
5 249 (9.8) 37.5 (1.48) 212 (8.35)

46 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Instruction Sheet

mm

24.1

+0.4
–0

3.2

22.3

+0.2
–0

+0.4
–0

OPTIONAL
EN OPTION
OPTIONAL
OPCIONAL
OPZIONALE

Bulletin 800F 22.5 mm Push Buttons Pendant Stations

=

A

A

B

5

"Click"

A

7 mm

,

+

1- 4,8 mm

"Click"

4

3

2

1- 6 mm

0,75 - 1,5 mm
(#18 - #14 AWG)

2

2

1

40 50

30

1

6

"Click"

B

40 50

40 / 60 50 / 60

48 40 / 60

1- 2,8 mm

"Click"

5

4

2

3

1- 4 mm

2

1

1

Ø40

Ø60

ø60, ø90

60 / 90

PLASTIC
PLASTIK

PLASTIQUE

PLÁSTICO

PLÁSTICA

G

E

N

R

E

C

Y

M

E

S

P

T

O

70 50

30 50

1,7 Nm
15 lb-in

METAL

4,4 Nm
40 lb-in

METALL
MÉTAL
METALLO

1

0,6 mm

0,75 - 2,5 mm
(#18 - #12 AWG)

2

0,7 - 0,9 Nm
6 - 8 lb-in

2

3,5 mm

8 mm

3

M3,5

3

1,2 Nm
10 lb-in

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 47

Bulletin 800F 22.5 mm Push Buttons Accessories

Accessories

The following accessories are available for use with Bulletin 800F operators.

Miscellaneous

Description Type Pkg. Quantity Cat. No.

Cat. No. 800F-AHA1

Cat. No. 888N-M4AF1-1F

Cat. No. 800F-ARP

Cat. No. 800F-AW2

Cat. No. 800F-ALR1

Cat. No. 1492-MS5X9

30.5 mm to 22.5 mm Hole Size Adapter
This adapter allows a 22.5 mm push button operator to be installed
in a panel with existing 30.5 mm mounting holes.

Metal

800F-AHA1

1

4-pin

888N-M4AF1-1F
Quick Disconnect
Male receptacle for pendant stations.

5-pin

888N-M5AF1-1F

Description Material Pkg. Quantity Cat. No.

800F-ARP

800F-ARM

Replacement Mounting Rings

Plastic

Metal

10

(2)

Description Pkg. Quantity Cat. No.

Mounting Ring Wrench
This mounting ring wrench is used to tighten plastic or metal mounting rings quickly

800F-AW2

and securely.

1

Bulb Removal Tool
For quick and easy removal of lamps from incandescent modules.

Snap-In Marker
This item can be used for circuit identification on all back-of-panel components.

800F-ALR1

(3)

(1)

Stab Terminals
Can be used with all single-circuit contact blocks. Minimum spacing requirements
apply. See instruction sheet for details.

Cat. No. 800F-ATK2

Ground Screws
These are self-tapping #6-32 (M3.5) ground screws for metal latches.

Cat. No. 800F-AGS1

Ground Screws
This accessory is used for grounding on Bulletin 800F plastic enclosures only.

Cat. No. 800F-AGS2

(1) Comes with anti-rotation washer (800F-ALC1).
(2) Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.
(3) See https://ab.rockwellautomation.com/Terminal-Blocks for ordering information.
(4) Sold only in multiples of 100. Order (quantity of) 100 to receive one package of 100 pieces.

100

10

(4)

800F-ATK2

800F-AGS1

(2)

800F-AGS2

48 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Bulletin 800F 22.5 mm Push Buttons Accessories

Cat. No. 800F-ALC1

Cat. No. 800F-ATW1

Cat. No. 800F-A3BA

Cat. No. 800F-ABZ1

Cat. No. 800F-ABJS

Description

Panel Thickness with

Legend Plates

1…4 mm
Locking Washer (Anti-rotation Washer)
This item provides an extra anti-rotation feature for rotary
operators such as selector switches.

1…5 mm

Description

Replacement Trim Washer
This accessory comes standard with all enclosures. It must be used if using base-mounted
contact blocks/power modules without legend plates.

Replacement Base Mount Adapter
This accessory comes standard with all metal enclosures. It is required when using metal
enclosures with base-mounted contact blocks or base-mounted power modules.

Square Bezel
Gives round operator a square appearance. This item is made of plastic. Not for use with
toggle switch operators.

Description Material

Silicone

Replacement Boot for Toggle Switch

Nitrile 800F-ABJN

Black plastic

Pkg.

Qty.

10

Pkg.

Qty.

10

Pkg.

Qty.

1

Cat. No.

800F-ALC1

(1)

800F-ALC2

Cat. No.

800F-ATW1

(1)

800F-A3BA

800F-ABZ1

Cat. No.

800F-ABJS

800F-N2

Hole Plug for 22.5 mm holes.

Cat. No. 800F-N2

Selector Switch Tabs
Changes functionality of selector switch from normal to CenterLeft or CenterRight.

Cat. No. 800F-ACP

(1) Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.

Gray plastic

10

800F-N8

(1)

800F-ACP

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 49

Bulletin 800F 22.5 mm Push Buttons Accessories

Guards

Description Type

Protective Ring for use with illuminated/non-illuminated 2-position
maintained and illuminated/non-illuminated 3-position mushroom
operators (30 mm and 40 mm only)

Cat. No. 800F-AMRG

Plastic Guard for use with the following operators:

• 40 mm E-stop (SEMI Standards Compliant)

• 40 mm illuminated/non-illuminated alternate action and

momentary operators

• 60 mm illuminated/non-illuminated momentary operators

Cat. No. 800F-A6PR5

• Selector switches (standard knob and key operated)

• Potentiometers
Narrow Plastic Guard for use with the following operators:

• Bul. 800FD monolithic E-stops (SEMI standards compliant)

• Flush/extended/guarded push buttons

• Alternate action operators

Cat. No. 800F-AMEGY

• Selector switches (standard knob and key operated)

• Potentiometers

40 mm Protective Guard used with illuminated and non-illuminated
momentary mushroom operators (40 mm) only.

Cat. No. 800F-AMMG

Clear silicone Protective Boot used on illuminated and non­illuminated, flush and extended operators.

Protective Boots

(1) Sold in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.

Pkg.

Qty.

Shiny metal

Black

Yellow metal

Yellow, round

Cat. No.

800F-AMRG

800F-AMRGB

800F-AMRGY

800F-A6PR5

1

Yel low

800F-AMEGY

Shiny metal 800F-AMMG

Flush push button

Extended push button 800F-ABE7

3-position multifunction

10

(1)

800F-AB7

800F-AUB1

2-position multifunction 800F-AUB2

50 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Locking Attachments

Bulletin 800F 22.5 mm Push Buttons Accessories

Cat. No. 800F-AFL1

Cat. No. 800F-AEL1

Cat. No. 800F-AML1

Cat. No. 800F-AML2

Cat. No. 800F-ASL2L

Description Type

Flush momentary,

nonilluminated

Locking Attachments are used to lock push button in the depressed
position.

Extended momentary,

non-illuminated

• N.C. contacts are open

• N.O. contacts may or may not be open

• N.C.L.B. contacts may or may not be closed

• N.O.E.M contacts are closed

Momentary mushroom 800F-AML1

Maintained mushroom 800F-AML2

Description Lock Position

2-position selector

Selector Switch Locking Attachment
Locks standard knob selector switch in specified position

switches, left lock

3-position selector

switches, center lock

Pkg.

Qty.

1

Pkg.

Qty.

Cat. No.

800F-AFL1

800F-AEL1

Cat. No.

800F-ASL2L

800F-ASL3C

Selector Switch Locking Attachment
Ability to put two locks on standard knob selector switch.

Cat. No. 800F-ASL23A

Locking Cover
Used on flush, extended and guarded momentary and alternate action operators, and standard
knob selector switch operators.

Cat. No. 800F-AL01

Replacement Keys

Description Pkg. Qty. Key No. (Std)

Replacement Ronis Key
Standard replacement key is Cat. No. 800F­AKR3825.

Cat. No. 800F-AKR3825

(1) Standard package quantity is one set with two keys.
(2) Master key. See page 17 for details.

2- or 3-position selector

switches, all positions

1

800F-ASL23A

800F-AL01

Cat. No. Key No. (Std) Cat. No.

3825 800F-AKR3825

455

3801

3802

(1)

1

3803

800F-AKR455

800F-AKR3801 4001 800F-AKR4001
800F-AKR3802 4002 800F-AKR4002
800F-AKR3803 4003 800F-AKR4003

3910

3920

(2)

(2)

800F-AKR3910

800F-AKR3920

3804 800F-AKR3804 4004 800F-AKR4004
3805
3806

3901

(2)

800F-AKR3805 4005 800F-AKR4005
800F-AKR3806 4006 800F-AKR4006

800F-AKR3901 4007 800F-AKR4007

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 51

Bulletin 800F 22.5 mm Push Buttons Accessories

Other Accessories

Description Volts Pkq. Qty. Cat. No.

Diode Module
For lamp checking circuits. Latch not included.

Null Block
For wire terminations only.

Cat. No. 800F-XD7

≤600V AC

10

800F-XD7

(1)

800F-NX70

Potentiometer Legend Plate
Scale 0…9

Cat. No. 800F-30WN

Potentiometer Legend Plate
Graphical scale

Cat. No. 800F-30WG

Description Resistance Pkq. Qty.

150 Ω

500 Ω

Replacement resistive elements for the 800FP
potentiometer operator.

1000 Ω 800F-AC3
2500 Ω
5000 Ω

Cat. No. 800F-AC1

(1) Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.

10,000 Ω 800F-AC6

Replacement Lamps for Incandescent Modules

Lamp Type Typical Current Voltage ANSI No. Pkg. Quantity

150 mA 6V AC/DC 755

Full Voltage

Incandescent

Cat. No. 800F-N130

80 mA 12V AC/DC 756
70 mA 24V AC/DC 757 800F-N157
50 mA 48V AC/DC 1835
22 mA 130V AC/DC 949

800F-30WN

10

800F-30WG

Cat. No.

800F-AC1

800F-AC2

1

800F-AC4
800F-AC5

Cat. No.

800F-N65
800F-N141

800F-N48

800F-N130

(1)

Neon 2 mA 240V AC — 800F-N240

Cat. No. 800F-N240

50 mA 6V AC/DC —

LED

12 mA/17 mA 32V AC/DC —

9 mA/14 mA 48V AC/DC —

4.5 mA/6.2 mA 130V AC/DC —

(1) Sold in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.
(2) To complete the cat. no., replace the x with one of the following letters for the desired color: A = Amber; B = Blue; G = Green; R = Red; W = White. White LEDs only available in 6V and 130V.

10

800T-N318x
800T-N363x
800T-N364x

800T-N321x

(2)

(2)

(2)

(2)

52 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Caps, Diffusers, Lenses

Color caps listed below are for completion of devices ordered with color caps omitted.

Table 31 - Non-illuminated Color Caps (without Text)

Bulletin 800F 22.5 mm Push Buttons Accessories

Color Pkg. Qty.

Orange

White

Black

Green

Red 800F-AE4 800F-AF4 800F-AFA4

10

Yellow

Blue

Momentary Extended Momentary Flush/Guarded Alternate Action Flush

Cat. No. Cat. No. Cat. No.

800F-AE0 800F-AF0 800F-AFA0

800F-AE1 800F-AF1 800F-AFA1
800F-AE2 800F-AF2 800F-AFA2
800F-AE3 800F-AF3 800F-AFA3

(1)

800F-AE5 800F-AF5 800F-AFA5
800F-AE6 800F-AF6 800F-AFA6

Gray — 800F-AF8 —

(1) Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.

Table 32 - Non-illuminated Color Caps — Multi-Function Operators (without Text)

Color Pkg. Qty.

White

Black

Green 800F-AFU3 800F-AEU3

Red

10

(1)

Yellow

Blue 800F-AFU6 800F-AEU6

(1) Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.

Flush Extended

Cat. No. Cat. No.

800F-AFU1 800F-AEU1

800F-AFU2 800F-AEU2

800F-AFU4 800F-AEU4
800F-AFU5 800F-AEU5

Table 33 - Illuminated Color Lens Caps and Pilot Light Lenses (without Text)

Color Lens Caps —

Color Pkg. Qty.

Amber

Flush, Alternate Action

(1)

Cat. No.

800F-ALF0 800F-ALE0 800F-AP0

Green 800F-ALF3 800F-ALE3 800F-AP3

Red

Yellow

10

(2)

800F-ALF4 800F-ALE4 800F-AP4
800F-ALF5 800F-ALE5 800F-AP5

Blue 800F-ALF6 800F-ALE6 800F-AP6

Clear

(1) Includes diffuser.
(2) Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.

800F-ALF7 800F-ALE7 800F-AP7

Table 34 - Operator Diffusers (without Text)

Description Pkq. Qty. Cat. No.

Illuminated push buttons — flush

Pilot lights 800F-AD3

Illuminated push buttons — extended, guarded

(1) Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.

10

(1)

800F-AD2

800F-AD4

Color Lens Caps —

Extended, Guarded

(1)

Cat. No.

Pilot Light Lenses —

Standard Lens

(1)

Cat. No.

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 53

Bulletin 800F 22.5 mm Push Buttons Accessories

33

(1.3)

41

(1.61)

57 (2.24)

54.2 (2.13)

41.6

(1.64)

20.2

(0.8)

54.2

(2.13)

43 (1.69)

22.4 (0.88)

54.2

(2.13)

52.6 (2.07)

19.5

(0.77)

33.4 (1.32)

38 (1.5)

5 (0.2)

69.4 (2.73)

64

(2.52)

34

(1.34)

3.3

(0.13)

40 (1.57)

46.2

(1.82)

42.2 (1.66)

Approximate Dimensions — Accessories

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

Locking Cover Maintained Mushroom Locking Attachment Mo

52.4 (2.06)

Extended Non-illuminated
Locking Attachment

54.2

(2.13)

Flush Non-illuminated Locking Attachment

42.7 (1.68)

mentary Mushroom Locking Attachment

Selector Switch Locking Cover
(Same for All Lock Positions)

Narrow Guard Protective Ring

Plastic Guard

44.4

(1.75)

24.3 (0.96)

88

(3.46)

54 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

3.3

(0.13)

Ø22.5
(0.89)

Bulletin 800F 22.5 mm Push Buttons Legend Plates/Caps

Cat. No. 800F-15YSE112

22.5 mm
mounting hole

Legend Plates/Caps

Two-color Molded Legend Caps — Non-illuminated Push Buttons

800F – AF 3 01

abc

abc

Button Cap Type Color Cap

Code Description Code Description Code Description

AF Flush 1White 01 START
AE Extended 2Black 02 STOP

3 Green 05 O
4Red 06 I
5Yellow 08 

6Blue 09

(1) White and yellow caps have black text. All other color caps have white text.
(2) See Tabl e 35 for valid color cap text codes.
(3) Available in flush only.

Legend Text (English)

10

11 R

FORWARD

REVERSE

(1) (2)

(3)

(3)

Table 35 - Valid Color Cap Text Codes

Color

Flush Caps Extended Caps
White FORWARD, REVERSE, START, I, , R , R
Black FORWARD, REVERSE, , R STOP, O, , R
Green FORWARD, REVERSE, START, I, 

Red FORWARD, REVERSE, STOP, O,  STOP, O, 

Yellow FORWARD, REVERSE, 

Blue FORWARD, REVERSE, , R , R

Emergency Stop Legend Plates

800F – 15YS

a b b (continued)

Si ze/Colo r (Yel low) Tex t Tex t

Code Description Code Description Code Description

15Y

15YS

16Y

(1) Not for use with base-mounted contact blocks.
(2) Not available on 15YS version.
(3) Text is printed on the 15Y version only.
(4) Text is printed on the 15YS & 16Y versions only.
(5) Sold only multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.

60 mm round

(30.5 mm mounting hole)

60 mm round

(22.5 mm mounting hole)

90 mm round

(22.5 mm mounting hole)

(1)

(1)

Tex t

(5)

ab

Blank No text W112

E112 EMERGENCY STOP A112 NØDSTOP
F112

ARRÊT D’URGENCE

(2)

S112 PARO DE EMERGENCIA
G112 NOT HALT D112
T112 ARRESTO EMERGENZA
N112

NÖDSTOPP, EMERGENCY STOP

P112 PARADA DE EMERGENCIA

NØDSTOPP, EMERGENCY STOP

EMERGENCY STOP, ARRÊT D’URGENCE,

B112

PARADA DE EMERGENCIA

OT HALT, ARRESTO EMERGENZA,

(2)

M112

ARRÊT D’URGENCE

EMERGENCY STOP, ARRÊT

D’URGENCE, NOT HALT
L112
H112

NEYÐARSTOPP, NEYÐARSTOPP

NÖD-STOP, HÄTÄ-SEIS, NÖD-STOP

NOODSTOP

(2)

(2)

(2)

(3)

(4)

(2)

(2)

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 55

Bulletin 800F 22.5 mm Push Buttons Legend Plates/Caps

Legend Plate Ordering Information

(a) (b) (c)

Standard Text/Symbols

1. Select the catalog number for the appropriate legend size
and color from the selection tables on this page.

2. Complete the catalog number by adding the appropriate
suffix number selected from page 59
automatically determined by the number of characters, as
shown in the following table. Do not add the font code to the
catalog number.

Number of Characters

Font Size

K (small) >14 >13 >6

S (standard) ≤14 ≤13 ≤ 6

One-Piece Legend

Plate

Example: Catalog number 800F-11WE101 identifies a white, 30 x

40 mm snap-in legend plate and frame with AUTO engraved on it.

. Font size is

Two-Piece

Legend Plate

Special Multi-

Function Legend

Plate

Custom Text

(d)

1. Select the catalog number for the appropriate legend size
and color from the Selection Tables on this page.

2. Add E100 followed by the font code (K, S, L) from the following
table.

Type of Legend Plate

30 x

Special Multi-

Function

Char.

per

Line,

Max

One-Piece Two-Piece

Font Size

K (small) 16 2 5 15 2 5 7 3

S

(standard)

L (large) 10 1 3 9 1 3 4 2

No. of Lines,

30 x

40 mm

Max

30 x

50 mm

Char.

per

Line,

Max

14 2 3 13 1 3 6 3

Char.

per

Line,

Max

No. of Lines, Max

30 x

40 mm

50 mm
or 30 x
60 mm

3. Complete the catalog number by adding custom text to the
order memo text or notes field.

No. of

Lines,

Max

Example: Catalog number 800F-12WE100K, with STARTER text

entered into memo text on order, identifies a white, 30 x 50 mm
snap-in legend plate and frame with custom text STARTER engraved
in small font.

(a) Blank legend frames sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Legends with standard text/symbols or custom text are packaged in

quantities of 1.
(b) Font code K = 0.08 in; font code S = 0.10 in; font code L = 0.14 in.
(c) For configuration assistance, see the product configurator at configurator.rockwellautomation.com
(d) Text found on page 61.

56 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

.

Selection Tables

800F-34x

800F-40x

800F-20x

800F-12x

800F-11x

Bulletin 800F 22.5 mm Push Buttons Legend Plates/Caps

(1)

Type

30 x 40 mm

2-piece

snapin plate

and frame

30 x 50 mm

2-piece

snapin plate

and frame

30 x 60 mm

2-piece

snapin plate

and frame

Special multi-

function

4-piece snap-

in plates and

frame

Description Cat. No. (Blank)

Red with white text

White with black text

800F-11RE100 800F-11Rxxxx

800F-11WE100 800F-11Wxxxx

Black with white text 800F-11BE100 800F-11Bxxxx

Aluminum with black text

White with black text

800F-11AE100 800F-11Axxxx

800F-12WE100 800F-12Wxxxx

Black with white text 800F-12BE100 800F-12Bxxxx

Aluminum with black text 800F-12AE100 800F-12Axxxx

White with black text 800F-20WE100 800F-20Wxxxx
Black with white text

800F-20BE100 800F-20Bxxxx

Aluminum with black text 800F-20AE100 800F-20Axxxx

White with black text 800F-40WE100 —
Black with white text

800F-40BE100 —

Aluminum with black text 800F-40AE100 —

Red with white text 800F-34RE100 800F-34Rxxxx

30 x 40 mm

1-piece

White with black text 800F-34WE100 800F-34Wxxxx
Black with white text

Aluminum with black text

800F-34BE100 800F-34Bxxxx
800F-34AE100 800F-34Axxxx

Red with white text 800F-35RE100 800F-35Rxxxx

30 x 50 mm

1-piece

White with black text
Black with white text

800F-35WE100 800F-35Wxxxx
800F-35BE100 800F-35Bxxxx

Aluminum with black text 800F-35AE100 800F-35Axxxx

Red with white text

30 x 40 mm

snap-in plate

only

White with black text
Black with white text 800F-17BE100 800F-17Bxxxx

Aluminum with black text

30 x 50 mm

snap-in plate

only

Special multi-

function

snap-in plate

(2)

only

30 x 66 mm

1-piece

(1) Plate dimensions found on page 62.
(2) Three snap-in plates are required for each legend frame.

White with black text
Black with white text 800F-18BE100 800F-18Bxxxx

Aluminum with black text

White with black text 800F-42WE100 800F-42Wxxxx
Black with white text 800F-42BE100 800F-42Bxxxx

Aluminum with black text

Yellow with black text

800F-17RE100 800F-17Rxxxx

800F-17WE100 800F-17Wxxxx

800F-17AE100 800F-17Axxxx

800F-18WE100 800F-18Wxxxx

800F-18AE100 800F-18Axxxx

800F-42AE100 800F-42Axxxx

800F-37YE100 800F-37Yxxxx

Cat. No. (with

Text Symbol s)

Legend Plate Frame — 2-Piece Snap-In

(1)

Type Cat. No. Type Cat. No.

30 x 40 mm

30 x 50 mm

(1) Blank legend frames sold only in multiples of 10. Order (quantity of) 10 to receive

one package of 10 pieces. Legends with standard text/symbols or custom text are
packaged in quantities of 1.

(2) Three snap-in plates are required for each legend frame.

800F-110 30 x 60 mm 800F-200

800F-120

Special

multifunction

800F-400

(2)

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 57

Bulletin 800F 22.5 mm Push Buttons Legend Plates/Caps

(Flush or
Alternate Action)

Custom Laser-engraved Caps and Diffusers Ordering Information

Standard Text/Symbols

1. Select the catalog number for the appropriate product and
color from configurator tables a

2. Complete the catalog number by adding the appropriate
suffix number selected from page 59

Example: Catalog number 800F-AF3CE166 identifies a flush, green
cap with custom-engraved text ON.

3. Font size is automatically determined by the number of
characters.

Custom Text

1. Select the catalog number for the appropriate product and
color from configurator tables a and b.

2. Add E100 followed by the font code (G, H, J), based on the
number of custom characters.

3. Complete the catalog number by adding custom text to the
order memo text or notes field.

Example: Catalog number 800F-AF3CE100J, with FILL text entered
into memo text on order, identifies a flush, green push button cap
with custom laser-engraved text FILL in large font.

(d)

Do not add a font code to the catalog number.

Font Size No. of Characters

12 pt 7
16 pt 5…6

20 pt 1…4

(e)

(a) (b) (c)

and b.

.

Push Button, Multi-function Caps

Position C

Position A

800F – A F 1 C

ab

a

Type

Code Description

E Push button extended cap

F Push button flush cap

FA Alternate action cap

FAU Multi-function flush cap (for position A)
EAU Multi-function extended cap (for position A)
FCU Multi-function flush cap (for position C)
ECU Multi-function extended cap (for position C)

b

Color

Code Description

0Amber

1White

2Black
3 Green
4Red
5 Yellow
6Blue

Font Size No. of Characters Number of Lines, Max

G (small) (12 pt.) 7 1

H (standard) (16 pt.) 5…6 1

J (large) (20 pt.) 1…4 1

Custom Symbols/Graphics

(f)

Pilot Light Diffuser Illuminated Push Button Diffusers

1. Select the catalog number for the appropriate product and
color from configurator tables a and b.

2. Add U100 to identify the custom symbol or graphic.

3. Contact your local Rockwell Automation sales office or Allen­Bradley distributor to submit the graphic.

Example: Catalog number 800F-AD3CU100

(a) Package quantity of one for all laser-engraved caps and diffusers.
(b) Standard font is Arial Narrow.
(c) For configuration assistance, see the product configurator at configurator.rockwellautomation.com
(d) Seven characters maximum allowable.
(e) Text found on page 61.
(f) Symbols found on page 59.

800F-AD3C 800F-AD2C

800F-AD4C

.

(Extended and Guarded)

58 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Legend Texts

Standard Symbols

(1)

Marking

(Blank) Blank —

O STOP — U228

I STEP 1 — U229

II STEP 2 — U230

O-I

I-O

I-II

I-O-II

I-II-III

Description Std. Suffix No.

——

(2) (3) (4) (5)

START

(2) (3) (4) (5)

—

(2) (3) (4) (5)

START

CONTINUOUS MOTION

LEFT, RIGHT

CONTINUOUS MOTION

UP, DOWN

STOP-START
START-STOP

(6)

(6)

(6)

(6)

(6)

—

(6)

—

(6)

—

(6)

—

(6)

—

ISO 72 U220

ISO 5232 U221

CONTINUOUS MOTION —

CONTINUOUS MOTION —

U100

U112

ISO 71 U219

— U226

— U227

— U231
— U232
— U233
— U234
— U236
— U237
— U240

U241

U242

Bulletin 800F 22.5 mm Push Buttons Legend Plates/Caps

(1)

Marking

DIRECTION OF SPINDLE SPEED

(1) Items in gray shaded table cells only available on legend plates. Not available as laser-

engraved text on button caps, illuminated push button diffusers, or pilot light diffusers.
(2) Not available on -11 or -17 legend plates.
(3) Not available on -12, -18, or -20 legend plates.
(4) Not available on -34 legend plates.
(5) Not available on -35 legend plates.
(6) Not available on -42 legend plates.

Description Std. Suffix No.

INTERRUPTED ROTATION

INTERRUPTED ROTATION

REDUCED SPEED

RAPID FEED

NORMAL FEED

TO LEFT

TO RIGHT

FEED

(2) (4)

(2) (4)

(2) (4)

(2) (4)

(2) (4)

(2) (4)

LONGITUDINAL FEED

TRANSVERSE FEED

(2) (4)

RAPID TRANSVERSE

THREADING

INCREASE

DECREASE

(2) (4)

(2) (4)

(2) (4)

CONVENTIONAL MILLING

CLIMB MILLING

(2) (4)

(2) (4)

(2) (4)

(2) (4)

(2) (4)

— U710

— U711

— U717

ISO 16 U720

— U723

— U724

— U725

— U726

— U727

ISO 26 U728

— U729

ISO 28 U730

ISO 29 U731

— U736

— U737

CONTINUOUS MOTION —

U243

III STEP 3 — U249

(6)

—

I-O-I

0-1-2

START-STOP-START

—

(6)

(6)

IV STEP 4 —

VSTEP 5—

CONTINUOUS MOTION ISO 1

LINEAR MOTION TWO DIRECTIONS ISO 2

VERTICAL MOTION —

INTERRUPTED MOTION

LIMITED MOTION

LIMITED MOTION AND RETURN

OSCILLATING MOTION,

CONTINUOUS CYCLE

CONTINUOUS ROTATION

TO RIGHT

CONTINUOUS ROTATION TO LEFT

(2) (4)

(2) (4)

(2) (4)

(2) (4)

(2) (4)

(2) (4)

— U256
— U282
— U285

U604
U605
U700

U701

U702

— U703
ISO 4 U704
ISO 5 U705

— U706

DIN 100,

ISO 7A

U707

ISO 7B U708

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 59

Bulletin 800F 22.5 mm Push Buttons Legend Plates/Caps

Standard Symbols, Continued

Marking Description Std.

ELECTRIC MOTOR

TURNING SPINDLE

DRILLING SPINDLE

MILLING SPINDLE

GRINDING SPINDLE

PUMP

COOLANT PUMP

LUBRICATION PUMP

(2) (4)

(2) (4)

(2) (4)

(2) (4)

(2) (4)

(2) (4)

(2) (4)

(2) (4)

HYDRAULIC SYSTEMS PUMP

HYDRAULIC MOTOR

TRACER

(2) (4)

(2) (4)

SHEAR PIN CONSTRUCTION

ATTENTION/DANGER

CAUTION

MAIN SWITCH

ACOUSTIC WARNING

EQUIPMENT

(2) (4)

(2) (4)

(2) (4)

(2) (4)

(2) (4)

(2) (4)

ISO 41 U800

— U803

— U804

— U805

— U806

ISO 48 U807

— U808

— U809

— U810

— U811

— U812

ISO 91 U850

DIN 131,

ISO 92
ISO 93 U852

ISO 94 U853

DIN 155 U854

Suffix No.

(1) (2)

U851

Marking Description Std.

BRAKE RELEASE ISO 66 U906

AUTO CYCLE —

MANUAL DIN 35

START ISO 69

STOP ISO 70

TAKE ACTION WHEN

CONTROL IS OPERATING

ENGAGE

DISENGAGE

ENGAGE TRACE — U917

DISENGAGE TRACE —

CHANGE SPEED ONLY IN

STOPPED POSITION

CHANGE SPEED ONLY

WHEN IN MOTION

CONTINUOUS ADJUSTMENT ISO 62

AUTOMATIC OR

SEMIAUTOMATIC CYCLE

R RESET R RESET —

(1) Not available on -11 or -17 legend plates.
(2) Not available on -34 legend plates.

—

DIN 46,

ISO 74

DIN 45,

ISO 75

—

—

DIN 267

Suffix No.

(1) (2)

U907

U908

U909

U910

U912

U913

U914

U918

U919

U920

U921

U922

U924

SETUP DIN 986

COOLANT FLUID ISO 101

LIGHT ISO 139, 102

WEIGHT —

REFILLING

DIN 256,

ISO 104

FULL LEVEL — U879

DRAIN

OVERFLOW

OIL LUBRICATION

BLOWING UNIT

SUCTION UNIT

DIN 257,

ISO 106

DIN 258,

ISO 105

DIN 175,

ISO 107

DIN 263,

ISO 108

DIN 264,

ISO 109

STEPLESS OPERATION ISO 61

CLAMP OR TIGHTEN ISO 63A

CLAMP OR TIGHTEN —

LOOSEN ISO 64A

LOOSEN —

BRAKE ON ISO 65

U855

U875

U876

U877

U878

U880

U881

U882

U883

U884

U900

U901

U902

U903

U904

U905

60 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Standard Text

Bulletin 800F 22.5 mm Push Buttons Legend Plates/Caps

IMPORTANT

Marking

(Blank)

(2) (3) (4)

I-O-AUTO

ACCU-STOP

AT SPEED E285

AUTO

AUTO-O-HAND

AUTO-HAND

AUTO-MAN-OFF

AUTO-MANUAL

AUTO-OFF-HAND

BLOWER

BRAKE

BYPASS-OFF-

(2) (3) (4)

DRIVE

BYPASS ON

BYPASS START

BYPASS STOP

CLAMP

CLOSE

CYCLE START E108 HAND OFF E264 MOTOR RUN E158
DECREASE

DRIVE-START

DRIVE-STOP

DOWN

DOWN-OFF-UP

(2) (3) (4)

DRIVE ON

EMERG STOP E251

EMERGENCY

EMERGENCY OFF

EMERGENCY STOP

ENABLE

ENTER
ERROR

EXHAUSTER

FAULT

FAST

FAST-OFF-SLO W

FASTER

FEED START E116

FEED STOP E117

FEEDER OFF E118

FEEDER ON E119

FIFO

(1) Items in gray shaded table cells only available on legend plates. Not available as laser-engraved text on button caps, illuminated push button diffusers, or pilot light diffusers.
(2) Not available on -34 legend plates.
(3) Not available on -35 legend plates.
(4) Not available on -42 legend plates.
(5) Not available on -11 or -17 legend plates.

For legend plates in French, Spanish, German, Italian, or Swedish contact your local Allen-Bradley distributor or Rockwell Automation sales office.

(1)

(4)

(2) (3) (4)

(4)

(4)

(2) (3) (4)

(2) (3) (4)

(2) (3) (4)

(4)

(4)

(4)

(4)

(4)

(4)

Suffix

No.

E100
E235
E284

FOR-AUTO-REV

FOR-OFF-REV

Marking

FOR-REV

(1)

(4)

FOR-STOP-REV

E101 FORWARD E120
E250

E102

(4)

E103
E286 LOW SPEED E151 PUSH-TO-TEST E181

(4)

E104
E268

E105

FORWARD-AUTO-

FORWARD-OFF-REVERSE

FORWARD-STOP-

REVERSE

(4)

REVERSE

(4)

(4)

FORWARD-REVERSE

E297 FULL SPEED E125 MANUAL E155 READY E185

E295 HAND E126

E299
E298

E106

E107

HAND-I-AUTO

HAND-O-AUTO

HAND-OFF-AUTO

(2) (3) (4)

HAND-AUTO

E109 HAND ON E263 MOTOR RUNNING E159

E287 HAND START E265 MOTOR START E160 RIGHT E191
E288 HAND STOP E266 MOTOR STOP E161

E110 HEAT E270 MOTOR STOPPED E162 ROTATE CW E246

E111 HIGH E129 NO FLIP E275 ROTATE CCW E247

E296

HIGH-LOW

HIGH-OFF-LOW

E248 IN E132

(4)

E294

(4)

E112 INCH E134
E279
E277

INCH-REVERSE

E273

E269

IN-OUT

INCH-REV

INCH-RUN
INCREASE

(4)

E113 INSPECT E274

E114 JOG E138 OPEN E170 SLOW E201

(4)

E289

E115

JOG-FORWARD

JOG-FOR

(4)

JOG-OFF-RUN

(4)

JOG-REV

JOG-REVERSE

(4)

JOG-RUN

E276

JOG-SAFE-RUN

Suffix

No.

(4)

E252

(4)

E261 LAST STOP E278 PULL TO START E180 SPEED E293

JOG-STOP-RUN

Marking

(1)

Suffix

No.

(4)

E144 POWER ON E178 SOFT STOP E292

Marking

(1)

Suffix

No.

Marking

E253 LEFT E145 PULL TO RESET E176 START E208

(4)

E254

LEFT-RIGHT

LOCAL-REMOTE

E121

LOW-HIGH

E122

LOW-OFF-HIGH

LOW

(4)

(4)

E146 PUMP STOP E290 START CYCLE E209

(4)

E147 PURGE E271

E148 PUSH TO STOP E179

E149

PUSH TO STOP-TWIST OR

(4)

E150

PULL, RELEASE

(2) (4) (5)

E262

START-JOG

START-STOP

STOP

STOP-CYCLE
STOP-RESET

E123

LOWER

LOW-OFF-RAISE

(4)

E124

LOWER-RAISE

E152 RAISE E182

(4)

E153

(4)

E154

RAISE-LOWER

RAISE-OFF-LOWER

STOP-START

(4)

E183

(4)

SUMMER-OFF-WINTER

E184

SUMMER-WINTER

MAN-O-AUTO

E239

(4)

E283

(4)

E127

(4)

E128

MAN-OFF-AUTO

MANUAL-OFF-AUTO

(2) (3) (4)

MAN-AUTO

MANUAL-AUTO

(4)

E238 RESET E186 SUPPLY ON E218
E258 RETURN E187 TEST E219

(4)

E156

(4)

E259 REVERSE E188 TRIP E221

(4)

E157

REVERSE-FORWARD

REVERSE-OFF-FORWARD

REV-FOR

(4)

E260

(4)

E189 UNCLAMP E222

(4)

E190

TRANSFER

UP-DOWN

UP

UP-OFF-DOWN

RUN-JOG

(4)

(4)

(4)

(4)

(4)

RIGHT-LEFT

(4)

(4)

(4)

(4)

E130 OFF E163 RUN E193

(4)

E131 OFF CIRCUIT E244

(4)

OFF-COOLANT-ON

E133

OFF-LIGHT-ON

(4)

OFF-ON

E257 ON E166

(4)

E135 ON CIRCUIT E245 SETUP E198
E136

E137

(4)

ON-OFF

ON-OFF-AUTO

ON-STOP-SAFE

E255

(4)

E139

(4)

E140 OUT E173
E256

(4)

E141

E142

(4)

E143 POWER OFF E177 SLOW SPEED E291

OPEN-CLOSE

OPEN-OFF-CLOSE

(4)

OVERLOAD

OVERLOAD TRIP

OVERLOAD RESET

E164

(4)

E272 RUNNING E243

RUN-SAFE-JOG

E165 SAFE E196

SAFE-RUN

E167

(4)

E168

(4)

E169

(4)

E171 SLOWER E202

(4)

E172 SLOWEST E203

SETUP-RUN

SETUP-SERVICE

SEQUENCE-TEST

SLOW-FAST

E267

(4)

E174

(4)

E175

SLOW-OFF-FAST
SLOW-STOP-FAST
SLOW-OFF-START

E192

E194

(4)

E195

E197

E302

(4)

E199

(4)

E200

E204

(4)

E205

(4)

E206

(4)

E207

(1)

(4)

(4)

(4)

(4)

(4)

(4)

(4)

(4)

(4)

(4)

Suffix

No.

E210
E211
E212
E213
E214
E215

E216

E217

E220

E223
E224

E225

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 61

Bulletin 800F 22.5 mm Push Buttons Legend Plates/Caps

6.2

(0.24)

1.4

(0.06)

29.7

(1.17)

24.8

(0.98)

39.7

(1.56)

Plate 27.1 x 6.4 mm (1.07 x 0.25 in.)

1.4

(0.06)

29.7

(1.17)

6.1

(0.24)

34.4

(1.35)

49.2

(1.94)

Plate 27.1 x 16.4 mm (1.07 x 0.65 in.)

30.5
(1.2)

60 (2.36)

60 (2.36)

22.5 (0.89)

1.4

(0.06)

29.7

(1.17)

6.1

(0.24)

2.1

(0.08)

44.6

(1.76)

69.5

(2.74)

Plate 27.1 x 16.4 mm (1.07 x 0.65 in.)

22.5 (0.89)

90 (3.54)

40

(1.57)

Ø29.5
(1.16)

Ø1.7

(0.07)

29.4

(1.16)

29.8

(1.17)

2

(0.08)

Approximate Dimensions — Legend Plates

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

30 x 40 mm Snap-in Legend Plate 30 x 50 mm Snap-in Legend Plate

60 mm Round Lege

90 mm Round Legend

nd — 15Y 60 mm Round Legend — 15YS 30 x 60 mm Snap-in Legend Plate

Potentiometer Legend Plate
(Series A)

Trim Washer Anti-rotation Washer Special Multi-function Snap-in Legend Plate

2.1

1.4

(0.06)

(0.08)

24.9

(0.98)

47.8 (1.88)

14.7 (0.58)

(0.24)

49.7

(1.96)

6.2

62 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Bulletin 800F 22.5 mm Push Buttons Legend Plates/Caps

23.7

(0.93)

29.8

(1.17)

38.6

(1.52)

1.5

(0.06)

3.12

(0.12)

29.6

(1.17)

33

(1.3)

34.7

(1.37)

34

(1.34)

30 x 40 mm One-piece Legend Plate 30 x 50 mm One-piece Legend

29.8

(1.17)

33.6

(1.32)

48.5

(1.91)

Plate 30 mm to 22.5 mm Hole Adapter

1.5

(0.06)

37.9

(1.49)

30 x 66 mm One-piece Legend Plate Hole Plug Base Mount Adapter

29.8

66

(2.6)

36

(1.42)

(1.17)

1.3

(0.05)

Panel thickness range is 1.0…6.0 mm (0.04…0.24 in.) maximum.
Panel thickness is reduced to 4 mm (0.16 in. [standard anti-rotation washer]) or 5 mm (0.2 in. [thin anti-rotation washer]) when

optional legend plates are used.

2.1

(0.08)

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 63

Bulletin 800F 22.5 mm Push Buttons Assembled Station Pin Out Chart

Assembled Station Pin Out Chart

Cat. No.

800F-1YMQ53V AC Micro / 5-pin BX01 1 2 BX01 4 5 — — — 3

800F-1YMQA AC Micro / 6-pin BX01 1 5 BX01 2 6 BX10 3 4 —

800F-NX1

800F-1YMQ1 BX01 1/4 2/3 — — — — — — —
800F-1YMQ2 BX10 2 4 BX01 1 3 — — — —
800F-1YMQ3 BX01 1 3 BX01 2 4 — — — —

800F-1YMQ3VEG BX01 1 3 BX01 2 4 — — — —

800F-1YMQ3V DC Micro / 5-pin BX01 1 2 BX01 4 5 — — — 3

800F-1YMQ41

800F-1YMQ44 BX10 1 J BX01 2 4 BN3R 3 J J

800F-1YMQ4
800F-1YMQ5 BX10 1 J BX01 6 5 BN5R 2 J J
800F-1YMQ6 BX10 1 J BX01 6 5 BN7R 2 J J

800F-1MYMQ4 BX10 1 J BX01 6 5 BN3R 2 J J
800F-1MYMQ5 BX10 1 J BX01 6 5 BN5R 2 J J
800F-1MYMQ6 BX10 1 J BX01 6 5 BN7R 2 J J

J = Jumper

Connector Style /

Number of Pins

DC Micro / 4-pin

Mini Receptacle / 4-pin

Mini Receptacle / 6-pin

Location 1

BX011/42/3———————

BX0124———————

BX10 1 J BX01 6 5 BN3R 2 J J

A to Pin #B to Pin

#

Location 2

C to Pin #D to Pin

#

Location 3

E to Pin #F to Pin #G to Pin

#

64 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Bulletin 598 General-purpose Push Button Enclosures

30x50 mm

Bul. 800F legend

plates (except top

hole in 2- and 3­hole enclosures)

30x40 mm

Bul. 800F standard

legend plates

Bul. 800F special

multi-function

legend plates

Bul. 800F 60 mm

round legend plates

(bottom hole only)

Double stacking of

Bul. 800F standard

contact blocks

All Bul. 800F

standard

contact blocks

Bul. 800F self-monitoring

and dual-circuit blocks

Our enclosures are designed to house 22.5 mm push buttons. These enclosures are available in both gray and yellow.

Table 36 - Product Selection

(1)

Enclosure

Gray Enclosure 1 598-1PB22G 598-2PB22G 598-3PB22G 598-4PB22G

Yellow Enclosure 1

Outside Dimensions (H x W x D)
[mm (in.)]

Base Depth [mm (in.)] 50 (1.97)
Cover Depth [mm (in.)] 35 (1.38)
Cover Screw Material Glass-reinforced nylon
Recommended Tightening

Torque [N•m (lb•in)]
Approx. Shipping Weight [g (lb)] 232 (0.51) 271 (0.60) 357 (0.79) 435 (0.96)

(1) Holes are premolded to fit 22.5 mm push buttons, such as 800F push buttons.
(2) Dimensions are not intended to be used for manufacturing purposes.

Pkg. Qty. Cat. No. (1-hole) Cat. No. (2-hole) Cat. No. (3-hole) Cat. No. (4-hole)

598-1PB22Y 598-2PB22Y 598-3PB22Y 598-4PB22Y

(2)

(4.33 x 3.15 x 3.35)

110 x 80 x 85

130 x 80 x 85

(5.12 x 3.15 x 3.35)

180 x 80 x 85

(7.09 x 3.15 x 3.35)

250 x 80 x 85

(9.84 x 3.15 x 3.35)

1.0…1.2 (9…11)

Legend Plate Compatibility/Options

Contact Block Compatibility/Options

65 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Bulletin 598 General-purpose Push Button Enclosures Specifications

Base Cover

H

E
A

G

2-insert M4

D1

7.0 mm

(0.275 in.)

D2

W

B

F

C1

C2

SIDE

VIEW

TOP

VIEW

KEY

Ø 22.5±0.2

(0.886±0.010)

3.25±0.1

(0.128±0.005)

24.25±0.2

(0.954±0.010)

Specifications

Product Certification

Approvals/Certifications c-UL-us Listed (File No. E54866; Guide No. NITW, NITW7), CE Marked

Standards Compliance UL 508A and CSA C22.2, No. 14

Degree of Protection Type 4, 4X, 12, and 13, IP66 (indoor/outdoor)

Environmental

Storage Temperature Range -40…+75 °C (-40…+158 °F)

Operating Temperature Range -40…+55 °C (-40…+131 °F)

Material

Enclosure Thermoplastic polyester blend, UL94; 5VA

Gasket Foam-in-place polyurethane

Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

Cat. No.

H W D1 D2 A B C1 C2 E F G

598-1PB22__ 110 (4.33) 80 (3.15) 50 (1.97) 35 (1.38) 104 (4.09) 74 (2.91) 46.5 (1.83) 31.5 (1.24) 92 (3.62) 62 (2.44) 80 (3.15)
598-2PB22__ 130 (5.12) 80 (3.15) 50 (1.97) 35 (1.38) 120 (4.72) 70 (2.76) 46.5 (1.83) 31.5 (1.24) 112 (4.41) 62 (2.44) 100 (3.94)
598-3PB22__ 180 (7.09) 80 (3.15) 50 (1.97) 35 (1.38) 170 (6.69) 70 (2.76) 46.5 (1.83) 31.5 (1.24) 162 (6.38) 62 (2.44) 50 (5.91)
598-4PB22__ 250 (9.84) 80 (3.15) 50 (1.97) 35 (1.38) 240 (9.45) 70 (2.76) 46.5 (1.83) 31.5 (1.24) 232 (9.13) 62 (2.44) 220 (8.66)

Overall Dimension Inside Dimension

Enclosure Mounting

Dimension

Push Button Hole

Mounting Plate

Mounting Dim.

66 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Push Button Hole Spacing

NOTCH

TOP

C D

B

NOTCH

Notch

Top

NOTCH

TOP

A

B

Notch

Top

NOTCH

NOTCHNotch

B

Top

TOP

Bulletin 598 General-purpose Push Button Enclosures Approximate Dimensions

E D D

NOTCHNotch

NOTCH

Top

TOP

B

DDDF

Cat. No. Type A B C D E F

598-1PB22G 1-hole

598-2PB22G 2-hole —

598-3PB22G 3-hole — —

598-4PB22G 4-hole — — —

55 ± 0.216

(2.165 ± 0.0085)

40 ± 0.5

(1.57 ± 0.020)

—

40 ± 0.175

(1.57 ± 0.0069)

50.0±0.191

(1.968±0.0075)

——

——

40 +0.32/-0.18

(1.57 +0.0126/-0.0071)

(1.968 ± 0.0085)

—

50 ± 0.216

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 67

Bulletin 800FC 22.5 mm Configured Pendant Stations

Pos.

2

Pos.

3

Multi-

operator

Position X

Position X+1

Multi-operator

Position 1

.
.
.
.
.

Position 7

Position 1

.
.
.
.
.
.

Position 9

Our pendant stations use the time-saving line of Bulletin 800F 22.5 mm push buttons for minimum inventory and maximum efficiency. We
also offer multiple options and customization options to fit your unique needs.

Operator Mounting and Sequence

Operator Mounting - Vertical vs. Horizontal Definition

Because of the design of the enclosures, operators can be mounted
in both a vertical and horizontal orientation. The easiest way to
visualize the operator orientation is by observing the contact block
direction that is attached to the operators. If the contact blocks are
mounted vertically, the operator is mounted vertically in the
enclosure.

Vertical mounted operators are only found in position 2 and 3 of the
3-hole enclosure. If the contact blocks are mounted horizontally,
the operator is mounted horizontally in the enclosure. Horizontal
mounted operators are found in position 1 of the 3-hole enclosure
and all positions of the 5-…9-hole enclosures. It is necessary to
have this knowledge when ordering individual operators for
populating at the customer location.

Operator Assembly Sequence and Mounting Orientation

Vertical Mount Operators Horizontal Mount Operators

Operator Sequence When Using a Mechanical Interlock

The 1-, 2-, and 3-speed operators can be mounted with either our
standard catalog number 800F-ALP latch or a mechanical
interlocking latch (catalog number 800FC-ALP).

For the 3-hole enclosure, the mechanical interlock can only be
located in positions 2 and 3, with the black operator being located
in position 2 and the white operator being located in position 3.

For the 5-…9-hole enclosures, the mechanical interlock can be
located in any two adjacent positions. For the 5-…9-hole
enclosures, the white operator is located in position X of the
mechanical interlock and the black operator is located in position
X+1 of the mechanical interlock.

Position 1

Position 1

.

Position 2

3-hole Enclosure

(1) Operator in Position 1 is mounted horizontally, contact blocks are horizontal. Operators in Positions 2 and 3 are mounted vertically, contact blocks are vertical.
(2) Operators in all positions are mounted horizontally, contact blocks are horizontal.

Position 3

(1)

5-hole Enclosure

.
.
.

Position 5

(2)

7-hole Enclosure

(2)

9-hole Enclosure

(2)

Enclosures

Enclosure Color/Material Enclosure Type Degree of Protection Pkg. Quantity

3-hole

(1) Housings supplied with cable sleeve, hanger ring, cable clamp, wire guides, and gasket.

Yellow plastic

5-hole
7-hole 800FC-7Z
9-hole

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 68

IP66 1

Cat. No.

800FC-3Z
800FC-5Z

800FC-9Z

(1)

Bulletin 800FC 22.5 mm Configured Pendant Stations 1-, 2-, and 3-speed Operators

UP FORWARD

RIGHT

DOWN REVERSE LEFT

1-, 2-, and 3-speed Operators

800FP – C A 1 U243

abc

ab

Operator Type

(1) (2)

Code Description Code Description

A 1-speed single arrow 1White
D 1-speed double arrow 2Black
B 2-speed

C

(1) Catalog number 800F-ALP (standard latch) and catalog number 800FC-ALP (mechanical interlock latch) can be used with these operators.
(2) Booted style of operators for pendant stations.
(3) Proper contact block assembly of these devices is required.

3-speed

(3)

c

Symbol

Code

Valid with

Table a

Code:

Vertical Mounting Horizontal Mounting

Black with

White Arrow

White with

Black Arrow

U100 A, B, C Blank Blank Blank Blank

One-speed Operators

U241

DOWN UP — —
U243 — — LEFT RIGHT
U244 REVERSE FORWARD — —

A
U246 REVERSE FORWARD
U700 LEFT RIGHT DOWN UP
U261

DOWN FAST UP FAST — —
U263 — — LEFT FAST RIGHT FAST
U264 REVERSE FAST FORWARD FAST — —

D
U266 REVERSE FAST FORWARD FAST
U260 LEFT FAST RIGHT FAST DOWN FAST UP FAST

Two-speed Operators

U271

2-speed DOWN 2-speed UP — —
U273 — — 2-speed LEFT 2-speed RIGHT
U274 2-speed REVERSE 2-speed FORWARD — —

B
U276 2-speed REVERSE 2-speed FORWARD
U270 2-speed LEFT 2-speed RIGHT 2-speed DOWN 2-speed UP

Three-speed Operators

U291

3-speed DOWN 3-speed UP — —
U293 — — 3-speed LEFT 3-speed RIGHT
U294 3-speed REVERSE 3-speed FORWARD — —

C
U296 — — 3-speed REVERSE 3-speed FORWARD
U290 3-speed LEFT 3-speed RIGHT 3-speed DOWN 3-speed UP

(1) Text (DOWN, UP, LEFT, and so on) indicates arrow direction. Text is not printed on operators.

For proper latch and contact block configurations, consult your local Rockwell Automation sales office or Allen-Bradley distributor.

Cap Color

Description

(1)

Black with

White Arrow

White with

Black Arrow

Figure 1 - Arrow Direction Chart

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 69

Bulletin 800FC 22.5 mm Configured Pendant Stations 800F Two-position Twist-to-release and Twist-to-release/Push-pull Operators

800F Two-position Twist-to-release and Twist-to-release/Push-pull Operators

Description Operator Cat. No. Guard Cat. No.

Twist-to-release — Red

Twist-to-release — Red, illuminated

Keyed twist-to-release — Red

Twist-to-release or push-pull — Red, monolithic

Twist-to-release or push-pull — Red, monolithic with guard, monolithic

(1) Replace the x with a 3 for 24V AC/DC or 5 for 120V AC.

800FP-MT44PX01 —

800FP-LMT44PNxRX01

800FP-MK44PX01 —

800FD-MT44X01 —
800FD-MT44X01 800F-AMEGY

(1)

—

800F Push Button Operators and Caps — Extended and Non-illuminated

IMPORTANT Mechanical interlock is not allowed.

Cap

Color

Black

White

Green

Red

Yellow

Blue

(1) For 24V AC/DC units, add V for low-voltage contact blocks. Example: Cat. No. 800FP-E5PX10 becomes Cat. No. 800FP-E5PX10V.

Description Symbol Definition Operator Cat. No. Cap Cat. No.

Blank —

LEFT or DOWN Single arrow 0°

REVERSE Single arrow 45° 800F-AE2CU244 800FP-E2U244 800FP-E2U244PX10 800FP-E2U244PX11

LEFT FAST or DOWN

FAST

REVERSE FAST Double arrow 45°

Blank — 800FP-E1 — — 800FP-E1PX10 800FP-E1PX11

UP or RIGHT Single arrow 0°

FORWARD Single arrow 45°

UP FAST or RIGHT

FAST

FORWARD FAST Double arrow 45°

Blank —

START Start symbol

Blank —

STOP Stop symbol

Blank — 800FP-E5 — — 800FP-E5PX10

ALARM Alarm 800FP-E9 800F-AE5CU223 800FP-E5U223 800FP-E5U223PX10

Blank —

R Reset symbol 800FP-E9 800F-AE611 800FP-E611 800FP-E611PX10

Double arrow 0°

Double arrow 0° 800F-AE1CU261 800FP-E1U261 800FP-E1U261PX10 800FP-E1U261PX11

800FP-E2 — — 800FP-E2PX10 800FP-E2PX11

800F-AE208 800FP-E208 800FP-E208PX10 800FP-E208PX11

800FP-E9

800FP-E9

800FP-E3 — — 800FP-E3PX10

800FP-E4 — — 800FP-E4PX10
800FP-E9 800F-AE405 800FP-E405 800FP-E405PX10

800FP-E6 — — 800FP-E6PX10

800F-AE2CU261 800FP-E2U261 800FP-E2U261PX10 800FP-E2U261PX11

800F-AE2CU264 800FP-E2U264 800FP-E2U264PX10 800FP-E2U264PX11

800F-AE108 800FP-E108 800FP-E108PX10 800FP-E108PX11

800F-AE1CU244 800FP-E1U244 800FP-E1U244PX10 800FP-E1U244PX11

800F-AE1CU264 800FP-E1U264 800FP-E1U264PX10 800FP-E1U264PX11

800F-AE3CU909 800FP-E3U909 800FP-E3U909PX10

Complete O perator

Cat. No.

Composite Cat. No./ No

Electrical Interlock

(1)

Composite Cat. No./

Electrical Interlock

—START/ALARM Start/Alarm 800FP-E9 800F-AE3CU222 800FP-E3U222 800FP-E3U222PX10

—

—

—

(1)

800F Push Button Operators — Extended and Illuminated

IMPORTANT Mechanical interlock is not allowed.

Lens Color Operator Cat. No.

Green 800FP-LE3 800FP-LE3PNxGX10

Red 800FP-LE4 800FP-LE4PNxRX10

Yellow

Blue

Clear 800FP-LE7 800FP-LE7PNxWX10

(1) Replace the x with a 3 for 24V AC/DC or 5 for 120V AC.

800FP-LE5 800FP-LE5PNxWX10
800FP-LE6 800FP-LE6PNxBX10

Composite Cat. No.

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 70

800F Selector Switch Operators — Maintained and Non-illuminated

Positions Keyed Operator Cat. No.

(1)

2

3

(1) For 24V AC/DC units, add V for low-voltage contact blocks. Example: Cat. No.

800FP-E5PX10 becomes Cat. No. 800FP-E5PX10V.

No 800FP-SM22 800FP-SM22PX11

Yes

No 800FP-SM32 800FP-SM32PX20

Yes

800FP-KM21 800FP-KM21PX11

800FP-KM34 800FP-KM34PX20

Composite Cat. No.

(1)

Bulletin 800FC 22.5 mm Configured Pendant Stations 800F Multi Operators and Caps — Extended

A

B

C

Vertical Mounting

C

A

B

Horizontal Mounting

800F Multi Operators and Caps — Extended

IMPORTANT • Mechanical interlock is not allowed.

• Electrical interlock cannot be performed within the pendant enclosure.

Description Symbol Definition Illumination Operator Cat. No.

Blank (black and white

cap)

—

Non-Illuminated

Illuminated

800FP-U2X

800FP-LU2X

Position A Cap

Cat. No.

800F-AEU2 800F-AEU1

Vertical Mounting

UP (white)/

DOWN (black)

RIGHT (white)/

LEFT (black)

FORWARD (white)/

REVERSE (black)

UP FAST (whit e)/DOWN

FAST (black)

RIGHT FAST (white)/

LEFT FAST (black)

FORWARD FAST

(white)/REVERSE FAST

(black)

Single arrow 0°

Single arrow 90°

Single arrow 45°

Double arrow 0°

Double arrow 90°

Double arrow 45°

Non-Illuminated

Illuminated 800FP-LU2X

Non-Illuminated

Illuminated

Non-Illuminated

Illuminated

Non-Illuminated

Illuminated 800FP-LU2X

Non-Illuminated 800FP-U2X

Illuminated 800FP-LU2X

Non-Illuminated 800FP-U2X

Illuminated 800FP-LU2X

800FP-U2X

800FP-U2X

800FP-LU2X 800F-PNxWX20

800FP-U2X

800FP-LU2X

800FP-U2X

800F-AECU2CU241 800F-AECU1CU241

800F-AECU2CU700 800F-AECU1CU700

800F-AECU2CU244 800F-AECU1CU244

800F-AECU2CU261 800F-AECU1CU261

800F-AECU2CU260 800F-AECU1CU260

800F-AECU2CU264 800F-AECU1CU264

Horizontal Mounting

LEFT (black)/
RIGHT (white)

DOWN (black)/

UP (white)

REVERSE (black)/
FORWARD (white)

LEFT FAST (black)/UP

FAST (white)

DOWN FAST (black)/UP

FAST (white)

Single arrow 90°

Single arrow 0°

Single arrow 45°

Double arrow 90°

Double arrow 0°

REVERSE FAST

(black)/FORWARD

Double arrow 45°

FAST (white)

(1) For 24V AC/DC units, add V for low-voltage contact blocks. Example: Cat. No. 800F-PX20 becomes Cat. No. 800F-PX20V.
(2) Replace the x with 3 for 24V AC/DC or 5 for 120V AC.

Non-Illuminated

Illuminated 800FP-LU2X

Non-Illuminated 800FP-U2X

Illuminated 800FP-LU2X

Non-Illuminated

Illuminated

Non-Illuminated

Illuminated 800FP-LU2X

Non-Illuminated 800FP-U2X

Illuminated 800FP-LU2X

Non-Illuminated 800FP-U2X

Illuminated 800FP-LU2X

800FP-U2X

800FP-U2X

800FP-LU2X

800FP-U2X

800F-AECU1CU241 800F-AECU2CU241

800F-AECU1CU242 800F-AECU2CU242

800F-AECU1CU245 800F-AECU2CU245

800F-AECU1CU261 800F-AECU2CU261

800F-AECU1CU262 800F-AECU2CU262

800F-AECU1CU265 800F-AECU2CU265

Position C Cap

Cat. No.

Back of Panel

Cat. No.

(1)

800F-PX20

800F-PNxWX20

800F-PX20

800F-PNxWX20

800F-PX20

800F-PX20

800F-PNxWX20

800F-PX20

800F-PNxWX20

800F-PX20

800F-PNxWX20

800F-PX20

800F-PNxWX20

800F-PX20

800F-PNxWX20

800F-PX20

800F-PNxWX20

800F-PX20

800F-PNxWX20

800F-PX20

800F-PNxWX20

800F-PX20

800F-PNxWX20

800F-PX20

800F-PNxWX20

(2)

(2)

(2)

(2)

(2)

(2)

(2)

(2)

(2)

(2)

(2)

(2)

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 71

Bulletin 800FC 22.5 mm Configured Pendant Stations 800F Pilot Lights — Monolithic

Cat. No. 800FC-ALP Cat. No. 800F-ALP

800F Pilot Lights — Monolithic 800F Potentiometer Operators

Lens Color Lamp Voltage Cat. No.

Green

Red

Yel low

Blue

Clear

24V AC/DC

120V AC

24V AC/DC 800FD-P4N3

120V AC

24V AC/DC

120V AC

24V AC/DC 800FD-P6N3

120V AC

24V AC/DC

120V AC 800FD-P7N5

800FD-P3N3
800FD-P3N5

800FD-P4N5
800FD-P5N3
800FD-P5N5

800FD-P6N5
800FD-P7N3

1-, 2-, and 3-speed Contact Block Assemblies

Resistive Element (Ω)

Cat. No.

(1)

150 800FP-POT1
500

800FP-POT2

1000 800FP-POT3
2500
5000

10,000

(1) Only available in Position 1 for a 3-hole enclosure, Positions 1

and/or 5 for a 5-hole enclosure, Positions 1 and/or 7 for a
7-hole enclosure, and positions 1 and/or 9 for a 9-hole
enclosure. No latches are required.

800FP-POT4
800FP-POT5
800FP-POT6

800F Hole Plug

Color

Black plastic

Cat. No.

800F-N2

Operator Type Interlock Type Composite Cat. No.

800F-PX10E 800F-ALP —

800F-PX11C 800F-ALP 800F-X01B

800F-LX20C 800FC-ALP —

800F-LX22C 800FC-ALP 800F-X01B

1-speed

No interlock

Electrical interlock

Mechanical interlock

Electrical and mechanical

interlock

(1)

(1)

Latch Cat. No.

Contact Block

Location 1 Cat. No.

No interlock 800F-PX20C 800F-ALP —

Electrical interlock

2-speed

Mechanical interlock

Electrical and mechanical

interlock

(1)

(1)

No interlock

3-speed

Mechanical interlock

(1) When ordering separate components, two pieces of each contact block must be ordered, one for each operator.
(2) Contact blocks come preassembled onto latch.
(3) For proper operation, Cat. No. 800F-X10M must be mounted in position 3 of either the mechanical or standard latch.

(1)

800F-PX21C 800F-ALP 800F-X01B
800F-LX40C 800FC-ALP —

800F-LX42C 800FC-ALP 800F-X01B

800F-PX30C

(2)

800F-ALP 800F-X10N

800F-LX60C 800FC-ALP

Separate Catalog Numbers

Location 2 Cat. No.

800F-X10N

(Speed 3)

Contact Block

— 800F-X10E

800F-X10N

(Speed 2)

800F-X10E

(Speed 2)

Contact Block

Location 3 Cat. No.

800F-X10E

(Speed 1)

800F-X10M

(3)

(Speed 1)

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 72

Bulletin 800FC 22.5 mm Configured Pendant Stations Configured Pendant Stations

Configured Pendant Stations

800FC –

ab

b

1

Pos. 1 Pos. 2 Pos. 3 Pos. 4 Pos. 5 Pos. 6 Pos. 7 Pos. 8 Pos. 9

Note: A code from Tables b…k and b1…k1 must be specified for each operator to create a valid cat. no.

a b…k

Enclosure Code Operator Type

Legend

(1)

Vol tage

24V AC/DC

120V AC

24V AC/DC

120V AC

Code Description AU White operator with arrow (up) LIFT, UP

N No interlock, no additional boots
E Electrical interlock, no additional boots Code Description Legend Plate Text (When Selected)
M
B

Electrical and mechanical interlock, boots standard
R No interlock, additional rubber boot DL Black operator with double arrow (left fast) O/H CRANE, LEFT FAST
S Electrical interlock, additional rubber boot DF White operator w/ double arrow (forward fast — up/right) O/H CRANE, FORWARD, FAST

(1) Enclosure code is always required. Voltage is used to select LEDs for illuminated operators. Standard contact blocks are used for both 24V and 120V enclosures.
(2) For a 3-hole enclosure, when a mechanical interlock (c1 & d1 = M or B) is selected with a 1-…3-speed operator, the black operator is located in position 2 of the enclosure and the opposite

white operator is placed in position 3 of the enclosure (Example: ABMAFM or BDMBUM). For a 5-...9-hole enclosure, when a mechanical interlock (b1…k1 = M or B) is selected with a 1-…3-speed
operator, the white operator is located in position X of the mechanical interlock and the opposite black operator is placed in position X+1 of the mechanical interlock (Example: AFMABM or

BUMBDM).
(3) Interlock and/or rubber boot selection = R (no interlock, additional rubber boot) is not allowed.
(4) Interlock and/or rubber boot selection = S (electrical interlock, additional rubber boot) is not allowed.
(5) For proper installation, a trim washer or Cat. No. 800F-36_ legend plate must be installed with this operator.
(6) Interlock and/or rubber boot selection = N (no interlock, no additional boots) is not allowed.
(7) Interlock and/or rubber boot selection = E (electrical interlock, no additional boots) is not allowed.

3-hole 5-hole 7-hole 9-hole

Plate

Code Code Code Code Code Description Legend Plate Text (When Selected)

No

Yes

2 4 6 8 A2 Black operator (no text or symbol) Blank
3 5 7 9 AB Black operator with arrow (reverse — down/left) O/H CRANE, REVERSE
A C E G AD Black operator with arrow (down) LIFT, DOWN

B D F H AL Black operator with arrow (left) HOIST, LEFT

b

1…k1

Interlock and/or Rubber Boot

Mechanical interlock, boots standard

c

c

1

d

d

1

e

e

1

f

f

1

g

g

1

3-…9-hole 5-…9-hole

Single Speed Operators for Use with Mechanical Interlock

A1 White operator (no text or symbol) Blank
AF White operator with arrow (forward — up/right) O/H CRANE, FORWARD
AR White operator with arrow (right) HOIST, RIGHT

Fast Single Speed Operators for use with Mechanical Interlock

(2)

(2)

DB Black operator w/ double arrow (reverse fast — down/left) O/H CRANE, REVERSE, FAST
DD Black operator with double arrow (down fast) LIFT, DOWN FAST

DR White operator with double arrow (right fast) O/H CRANE, RIGHT FAST
DU White operator with double arrow (up fast) LIFT, UP FAST

Two-speed Operators for Use with Mechanical Interlock

Code Description Legend Plate Text (When Selected)

B2 Black operator (no text or symbol) Blank
BB Black operator with arrow (reverse — down/left) 1-2 SPEED, O/H CRANE, REVERSE
BD Black operator with arrow (down) 1-2 SPEED, LIFT, DOWN
BL Black operator with arrow (left) 1-2 SPEED, HOIST, LEFT
B1 White operator (no text or symbol) Blank
BF White operator with arrow (forward — up/right) 1-2 SPEED, O/H CRANE, FORWARD
BR White operator with arrow (right) 1-2 SPEED, HOIST, RIGHT
BU White operator with arrow (up) 1-2 SPEED, LIFT, UP

Three-speed Operators for Use with Mechanical Interlock

Code Description Legend Plate Text (When Selected)

C2 Black operator (no text or symbol) Blank
CB Black operator with arrow (reverse — down/left) 1-2-3 SPEED, O/H CRANE, REVERSE
CD Black operator with arrow (down) 1-2-3 SPEED, LIFT, DOWN
CL Black operator with arrow (left) 1-2-3 SPEED, HOIST, LEFT
C1 White operator (no text or symbol) Blank
CF White operator with arrow (forward — up/right) 1-2-3 SPEED, O/H CRANE, FORWARD
CR White operator with arrow (right) 1-2-3 SPEED, HOIST, RIGHT
CU White operator with arrow (up) 1-2-3 SPEED, LIFT, UP

h

h

1

j

j

1

(2) (3) (4) (5)

(2) (3) (4) (5)

(2) (3) (4) (5)

(2) (3) (4) (5) (6) (7)

k

k

1

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 73

Bulletin 800FC 22.5 mm Configured Pendant Stations Configured Pendant Stations

b…k, Continued b…k, Continued

Operator Type Operator Type

Emergency Stop Operators

Code Description

MT Red operator — twist-to-release

(1) (2) (3) (4) (5) (6)

Legend Plate Text

(When Selected)

2-function Multi-operator Push Buttons

Code Description

VV Black/white operator with arrow (down and up)

ME Illuminated red operator — twist-to-release VW Black/white operator with arrow (left and right)

MK Red operator — keyed twist-to-release
MM

Red operator — twist-to-release/push-pull

MG

Red operator with guard — twist-to-release/

push-pull

(7)

Standard Extended Push Buttons — Non-illuminated

(7)

Not provided

(3) (4)

E2 Black operator (no text or symbol) Blank
ED Black operator with arrow (down) LIFT, DOWN
EL Black operator with arrow (left) HOIST, LEFT

EB

Black operator with arrow

(reverse — down/left)

O/H CRANE, REVERSE XV

FD Black operator with double arrow (down fast) LIFT, DOWN FAST
FL Black operator with double arrow (left fast) O/H CRANE, LEFT FAST

FB

Black operator with double arrow

(reverse fast — down/left)

O/H CRANE, REVERSE, FAST XX

E1 White operator (no text or symbol) Blank
EU White operator with arrow (up) LIFT, UP
ER White operator with arrow (right) HOIST, RIGHT

EF

White operator with arrow

(forward — up/right)

O/H CRANE, FORWARD

FU White operator with double arrow (up fast) LIFT, UP FAST
FR White operator with double arrow (right fast) O/H CRANE, RIGHT FAST

FF

E3
EQ
EN
E4
ES
E5
EA
E6

White operator with double arrow

(forward fast — up/right)

Green operator (no text or symbol)

Green operator with Start/Alarm symbol

Green operator with Start symbol

Red operator (no text or symbol)

Red operator with Stop symbol

Yellow operator (no text or symbol)

Yellow operator with Alarm symbol

Blue operator (no text or symbol)

(2) (6)

(2) (6)

(2) (6)

(2) (6)

(2) (6)

(2) (6)

(2) (6)

(2) (6)

O/H CRANE,

FORWARD, FAST

Blank P4 Red LED Blank

START, ALARM P5 Yellow LED Blank

START P6 Blue LED Blank

Blank P7 Clear LED Blank

STOP

Blank 1P Black operator — 150 Ω Blank

ALARM 2P Black operator — 500 Ω Blank

Blank 3P Black operator — 1000 Ω Blank

VX

WV

WW

WX

XW

YV

YW

YX

P0 Amber light-emitting diode (LED) Blank
P3 Green LED Blank

Black/white operator with arrow

(reverse and forward)

Black/white operator, illuminated,

with arrow (down and up)

Black/white operator, illuminated,

with arrow (left and right)

Black/white operator, illuminated,

with arrow (reverse and forward)

Black/white operator with double arrows

(down fast and up fast)

Black/white operator with double arrows

(left fast and right fast)

Black/white operator with double arrows

(reverse fast and forward fast)

Black/white operator, illuminated, with double

arrows (down fast and up fast)

Black/white operator, illuminated, with double

arrows (left fast and right fast)

Black/white operator, illuminated, with double

arrows (reverse fast and forward fast)

Pilot Lights

Potentiometers

(2) (3) (4) (5) (6) (7)

(2) (3) (4) (6) (8)

R6 Blue operator with R RESET 4P Black operator — 2500 Ω Blank

Standard Extended Push Buttons — Illuminated

(3) (4) (6)

5P Black operator — 5000 Ω Blank
L3 Green operator (no text or symbol) Blank 6P Black operator — 10,000 Ω Blank
L4 Red operator (no text or symbol) Blank

Hole Plug

(2) (3) (4) (5) (6)

L5 Yellow operator (no text or symbol) Blank N2 Black hole plug Blank
L6 Blue operator (no text or symbol) Blank
L7 Clear operator (no text or symbol) Blank

Selector Switches

SH
KH Keyed-maintained
SJ
KJ Keyed-maintained

2-position

3-position

Standard-maintained

Standard-maintained

(2) (3) (4) (5) (6)

O-I

I-O-II

(1) Only available in position 1 of a 3-hole enclosure and in positions 1 & 2 of a 5-…9-hole enclosure.
(2) Interlock and/or rubber boot selection = E (electrical interlock, no additional boots) is not allowed.
(3) Interlock and/or rubber boot selection = M (mechanical interlock) is not allowed.
(4) Interlock and/or rubber boot selection = B (electrical and mechanical interlock) is not allowed.
(5) Interlock and/or rubber boot selection = N (no interlock, no additional boots) is not allowed.
(6) Interlock and/or rubber boot selection = R (no interlock, additional rubber boot) is not allowed.
(7) Monolithic style device provided.
(8) Only available in position 1 for a 3-hole enclosure, positions 1 and/or 5 for a 5-hole enclosure, positions 1 and/or 7 for a 7-hole enclosure, and positions 1 and/or 9 for a 9-hole enclosure.

(2) (3) (4) (6)

Legend Plate Text

(When Selected)

Not provided

74 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Accessories

LIFT

DOWN

LIFT

DOWN

Cat. No. 800F-36VE416

D
O

W

N

L
I
F
T

D
O

W

N

L

I
F
T

Cat. No. 800F-36HE416

Line 1
Line 2

Line 3
Line 4

Figure 2 - Engraved Legend Plates

Bulletin 800FC 22.5 mm Configured Pendant Stations Accessories

Description

Cat. No.

(1)

Description

Cat. No.

Blank 800F-36BE100 1-2-3 SPEED, O/H CRANE, FORWARD 800F-36xE411

O-I 800F-36xU231 1-2-3 SPEED, O/H CRANE, REVERSE 800F-36xE412

I-O-II

RESET

800F-36xU234 ALARM 800F-36xE413

800F-36xE186 HOIST, LEFT 800F-36xE414

START 800F-36xE208 HOIST, RIGHT 800F-36xE415

STOP

1-2 SPEED, HOIST, LEFT

800F-36xE212 LIFT, DOWN 800F-36xE416

800F-36xE401 LIFT, DOWN FAST 800F-36xE417

1-2 SPEED, HOIST, RIGHT 800F-36xE402 LIFT, UP 800F-36xE418

1-2 SPEED, LIFT, DOWN

1-2 SPEED, LIFT, UP

800F-36xE403 LIFT, UP FAST 800F-36xE419
800F-36xE404 O/H CRANE, FORWARD 800F-36xE420

1-2 SPEED, O/H CRANE, FORWARD 800F-36xE405 O/H CRANE, FORWARD, FAST 800F-36xE421

1-2 SPEED, O/H CRANE, REVERSE

1-2-3 SPEED, HOIST, LEFT

1-2-3 SPEED, HOIST, RIGHT

800F-36xE406 O/H CRANE, LEFT FAST 800F-36xE422
800F-36xE407 O/H CRANE, REVERSE 800F-36xE423
800F-36xE408 O/H CRANE, REVERSE, FAST 800F-36xE424

1-2-3 SPEED, LIFT, DOWN 800F-36xE409 O/H CRANE, RIGHT FAST 800F-36xE425

1-2-3 SPEED, LIFT, UP

(1) For vertically mounted operators, replace the x with a V. Example: Cat. No. 800F-36xE186 becomes Cat. No. 800F-36VE186.

For horizontally mounted operators, replace the x with an H. Example: Cat. No. 800F-36xE186 becomes Cat. No. 800F-36HE186.
(2) Font code (K, S, L) must be selected from the table following Figure 3.
(3) Please complete the Custom Text Fax/Scan Sheet on page 81 to verify accuracy of legend plate engraving.

800F-36xE410 START, ALARM 800F-36xE426

Custom text

800F-36xE100

Figure 3 - Font Code

(1)

(2) (3)

Line 4

Line 3

Font Size

Line 1

Line 2

Vertical Mounting (V) Horizontal Mounting (H)

Characters Per Line, Max No. of Lines, Max Characters Per Line, Max No. of Lines, Max

K (small) 16 4 9 4

S (standard) 14 4 8 4

L (large) 10 2 7 2

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 75

Bulletin 800FC 22.5 mm Configured Pendant Stations Accessories

Table 37 - Miscellaneous Accessories

Description Pkg. Quantity Cat. No.

Plastic mounting latch 10

Mechanical interlock latch 1

Replacement wire guide

(2)

10 800FC-AWG

Replacement trim washer 10 800F-ATW1

Insulated side jumper 50

Hole plug 1 800F-N2

Description Type Pkg. Quantity

N.O.
N.C. 800F-X01

N.O. low-voltage — QuadConnect™

N.C. low-voltage — QuadConnect

Contact block

Cable sleeve

N.C.E.B. 800F-X01B

(3)

N.O.E.M.

(4)

N.O.L.M.

N.O.E.E.M.

(5)

3-hole (M20 x 1.5)
9-hole (M32 x 1.5)

10

1

Extended push button

Protective boot

2-position multi-operator

10

800F-ALP

800FC-ALP

1492-SJ5A-24
1492-SJ5A-10

Cat. No.

800F-X10

800F-X10V
800F-X01V

800F-X10E
800F-X10N

800F-X10M

800FC-AS3
800FC-AS5

800F-ABE7

800F-AUB2

(1)

(6)

(7)

(7)

Narrow plastic guard Yellow 1 800F-AMEGY

24V AC/DC

Integrated LED module

(1) Only for use with 1-, 2-, and 3-speed operators.
(2) Wire guides are provided with enclosures.
(3) First contact closure of 1- and 2-speed operators.
(4) Second contact closure of 2-speed operators and third contact closure of 3-speed operators.
(5) First contact closure of 3-speed operators.
(6) For proper operation, Cat. No. 800F-X10M must be mounted in position 3 of the mechanical or standard latch.
(7) Not for use with 1-, 2-, and 3-speed operators.
(8) To complete the cat. no., replace the x with one of the following letters for the desired color: Y = Amber, R = Red, G = Green, B = Blue, W = White.

120V AC

10

76 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

800F-N3x

800F-N5x

(8)

(8)

Specifications

Bulletin 800FC 22.5 mm Configured Pendant Stations Specifications

Table 38 - Front-of-panel (Operators)

Description Plastic (Bulletin 800FP)

Vibration (assembled to panel) Tested at 10…2000 Hz, 1.52 mm displacement (peak-to-peak) max/10 G max for 3 hr duration, no damage
Shock Tested at 1/2 cycle sine-wave for 11 ms; no damage at 100 G

Degree of protection

Mechanical durability per
EN 60947-5-1 (Annex C)

Operating forces (typical with one contact block) Flush/extended = 5 N, E-stop = 36 N
Operating torque (typical application with one contact

block)
Mounting torque 1.7 N•m (15 lb•in)

Temperature range (operating)
Temperature range (short-term storage) -40…+85 °C (-40…+185 °F)

Humidity ≤95% RH from 25…60 °C (77…140 °F)

(1) Performance Data — see Important table on page 4.
(2) Plastic-keyed operators are IP66, Type 4/13; not Type 4X.
(3) Operating temperatures below 0 °C (32 °F) are based on the absence of freezing moisture and liquids, UL Recognized to 55 °C (131 °F) - Incandescent module max 40 °C (104 °F) - fully

populated 9-hole pendant enclosure 45 °C (113 °F) with 75 °C wire.
Note: Use UL Listed type S or SJ cords, with a smooth outer jacket rated for wet locations use (marked W) and oil-resistant outer covering (marked O) such as SOW or SJOW with copper wire,

rated 75 °C min, 18…12 AWG, with an overall OD of 7.5…15 mm for the small cable sleeve (catalog number 800FC-AS3) and 9…22.5 mm for the large cable sleeve (catalog number 800FC-AS5).

(2)

10,000,000 Cycles Momentary push buttons
1,000,000 Cycles Multi-function, selector switch, key selector switch
300,000 Cycles Twist-to-release E-stop, illuminated push-pull E-stop, alternate action push buttons
100,000 Cycles Potentiometer, toggle switch

(1)

Mechanical Ratings

IP66 (Type 4/4X/13)

Selector switch = 0.25 N•m (2.2 lb•in)

Environmental

-25…+70 °C (-13…+158 °F)

(3)

Table 39 - Product Certifications

Certifications UR/UL, CSA, CCC, CE
Standards Compliance NEMA ICS-5, UL 508, CSA C22.2 No. 14, EN ISO 13850, EN 60947-1, EN 60947-5-1, EN 60947-5-5
Terminal Identification EN/IEC 60947-1
RoHS Yes

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 77

Bulletin 800FC 22.5 mm Configured Pendant Stations Specifications

Table 40 - Material Listing

Component For Use with Material Used

Panel gasket All operators Nitrile, TPE

Diaphragm seal Illuminated push button, non-illuminated push button

K-seal Selector switch, key selector switch, push/twist-to-release E-stop, key E-stop Nitrile

Diaphragm retainer, return spring I Illuminated push button, non-illuminated push button Stainless steel

Return spring II

Button cap Non-illuminated push button, push/twist-to-release, E-stop, key E-stop, multi-function PBT/polycarbonate blend

2-color molded button cap Non-illuminated push button PBT/polycarbonate blend

Lens Multi-function Acetal

Lens, knob Illuminated push button Polyamide

Knob Non-illuminated selector switch Glass-filled polyamide

Plastic bezel/bushing I

Plastic bezel/bushing II Pilot light Glass-filled PBT

Diffuser Illuminated push button, pilot light Polycarbonate

Plastic mounting ring All plastic operators Glass-filled polyamide

Plastic latch — Glass-filled polyamide

Mechanical interlock latch — Glass-filled polyamide

Plastic enclosure — PBT/polycarbonate blend

Terminal screws LED module, contact blocks Zinc-plated steel with chromate

Terminals LED module, contact blocks Brass with silver-nickel contacts

Housing LED module Glass-filled polyamide

Low-voltage terminals Contact blocks Gold-plated silver-nickel contacts

Low-voltage spanner Contact blocks Gold-plated silver-nickel contacts

Spanner Contact blocks Brass with silver-nickel contacts

Boot Illuminated/non-illuminated push button, illuminated/non-illuminated multi-function

Selector switch, key selector switch, alternate action, push/twist-to-release E-stop, key E-

stop

Non-illuminated push button, illuminated push button, selector switch, key selector switch,

push/twist-to-release E-stop, key E-stop, multi-function

Automotive industry acceptable

silicone

Zinc-coated music wire

Glass-filled polyamide

Automotive industry acceptable

silicone

78 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Bulletin 800FC 22.5 mm Configured Pendant Stations Specifications

→

→

Table 41 - Back-of-Panel Components

Standard contact block ratings

Low-voltage contact block ratings

LED Module Ratings

Thermal current 10 A max enclosed (40 °C [104 °F] ambient) to UL508, EN 60947-5-1
Insulation voltage (U

Wire capacity (screw terminal)
Wire capacity (spring-clamp terminal) #18…14 AWG (0.75…1.5 mm²) One per spring clamp, two spring clamps per terminal
Recommended tightening torque on screw terminals 0.7…0.9 N•m (6…8 lb•in)
Dielectric strength (minimum) 2500V for 1 minute

External short circuit protection

Electrical shock protection Fingersafe conforming to IP2X

Vibration (assembled to panel) Tested at 10…2000 Hz, 1.52 mm displacement (peak-to-peak) max/10 G max 6 hr
Shock Tested at 1/2 cycle sine-wave for 11 ms and no damage at 100 G max
Contact durability per EN 60947-5-1 (Annex C) 10,000,000 cycles

Contact operation

Standard push button travel to change electrical state

Multi-speed push button travel to change electrical state

Operating forces (typical)

Springs Stainless steel and zinc-coated music wire

Electrical contacts

Ter mina ls

(1) Performance Data — see Important table on page 5.
(2) Low-voltage contacts are recommended for applications below 17V, 5 mA.
(3) Wires less than #18 AWG (0.75 mm²) cannot hold in terminal securely.

)

i

(2)

(3)

Standard blocks 10 A type gL/gG cartridge fuse to EN 60269-2-1 or gN (Class J to UL 248-8 or Class C to UL 248-4)
Low-voltage contact blocks 6 A type gL/gG cartridge fuse to EN 60269-2-1 or gN (Class J to UL 248-8 or Class C to UL 248-4)

N.O. Slow double make and break
N.C.
N.O.E.M. Double break / double make, early make
N.C.L.B

N.C.E.B.
N.O.E.E.M. Double break / double make, early early make

N.O.L.M. Double break / double make, late make

Single-circuit contact block 3.4 N
Dual-circuit contact block 5…6.5 N

Standard Silver-nickel
Low-voltage Gold-plated over silver
Screw Brass
Spring-clamp Silver-plated brass

(1)

Electrical Ratings

A600, Q600

AC 15, DC 13 to IEC/EN 60947-5-1 and UL 508, 17V, 5 mA min

C300, R150, AC 15, DC 13 to EN 60947-5-1 and UL 508

Nominal Voltage Range Current Draw Frequency

24V AC
24V DC

120V AC

240V AC

10…29V AC
10…30V DC

70…132V AC

180…264V AC

Screw terminal = 690V, spring-clamp = 300V

#18…12 AWG (0.75…2.5 mm²) / max (2) #14 AWG or (1) #12 AWG

Mechanical Ratings

Slow double make and break — positive opening

Double break / double make, late break — positive opening

Double break / double make, early break — positive opening

N.C. and N.O.E.M. 1.5 mm (0.060 in.)
N.O. and N.C.L.B. 2.5 mm (0.1 in.)

N.O.E.E.M. 3 mm (0.12 in.)

N.C.E.B. 4 mm (0.16 in.)
N.O.L.M. 7 mm (0.28 in.)

Materials

600V AC

5V, 1 mA DC min

31 mA
24 mA
25 mA
22 mA

→

50/60 Hz

50/60 Hz
50/60 Hz

DC

Illumination

Green Red Ye llow Blue White

LED dominant wavelength 525 nm 629 nm 590 nm 470 nm —
LED luminous intensity 780 mcd 780 mcd 600 mcd 168 mcd 360 mcd

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 79

Bulletin 800FC 22.5 mm Configured Pendant Stations Approximate Dimensions

13.6 (0.54)

31.4

(1.24)

88

(3.46)

76 (2.99)

8

(0.31)

36

(1.42)

33 (1.3)

250

(9.84)

104

(4.09)

34

(1.34)

Table 42 - Bulletin 800F Operator Dimensions

Operator Page

Momentary push button 9

Alternate action 10

Pilot light 11

Selector switch 16 and 19

Push-pull 24

Mushroom 26

Multi-operator 30

Reset 31

Potentiometer 32

Key-operated selector switch 33

Selector push button 34

Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

Bulletin 800FC 1-, 2-, and 3-speed Operator Bulletin 800FC Legend Plate

35.6 (1.4)

52

(2.05)

Bulletin 800FC Pendant Station (3-hole) Bulletin 800FC Pendant Station (5-, 7-, and 9-hole)

Cat. No. Holes A B

800FC-4/5/C/D 5 309 (12.17) 36 (1.42)
800FC-6/7/E/F 7 381 (15) 36 (1.42)
800FC-8/9/G/H 9 453 (17.83) 36 (1.42)

80 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

91 (3.58)

B

B

B

B

B

B

78 (3.07) 73 (2.87)

A

8

(0.31)

Custom Text Fax/Scan Sheet

Order/Item __________________________________

Cat. No. 800F-36VE100K

Vertical Mounting

Cat. No. 800F-36HE100K

Cat. No. 800F-36HE100S

Cat. No. 800F-36HE100L

Horizontal Mounting

Cat. No. 800F-36VE100S

Cat. No. 800F-36VE100L

Bulletin 800FC 22.5 mm Configured Pendant Stations Custom Text Fax/Scan Sheet

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 81

Bulletin 800FD 22.5 mm Monolithic Push Buttons

Our monolithic operators are designed to meet worldwide standards. These operators include E-stops and pilot lights with either light
indicators or incandescent illumination options. With one catalog number, you can now order a fully assembled product for easy stocking
and installation.

Momentary Push Button Operators, Non-illuminated

800FD – F 3 01 X 11

abcde

ab

Operator Type Color Cap Legend Text

Code Description Code Color Code Text

FFlush 1White — No text (blank)
E Extended 2Black 01 START

3 Green 02 STOP
4Red 05 O
5Yellow 06 l
6Blue 08 

09 FORWARD

10 REVERSE
11 R

de

Ter min ati on S tyl e Contact Mod ule

Code Description Code Number of N.O. Number of N.C.

XStandard screw 01 0 1

RRing lug 10 1 0

11 1 1
02 0 2
20 2 0

(1) White and yellow caps have black text. All other color caps have white text.
(2) Valid color cap/legend text combinations are as follows:

c

(1) (2)

Color

White START, l, , FORWARD, REVERSE, R , R
Black , FORWARD, REVERSE, R
Green START, l, , FORWARD, REVERSE 

Red , FORWARD, REVERSE

Yellow , FORWARD, REVERSE 

Blue , FORWARD, REVERSE, R , R

(1) “STOP” or “O” color cap/legend text are not available for “10” or “20” contact modules.

Flush Caps Extended Caps

Tex t

STOP, O, , R

STOP, O, 

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 82

(1)

(1)

Pilot Light Devices

Light-emitting Diode (LED)

Lens and LED Color Pkg. Quantity

Green

Red

Yellow

abc

Lens Cap Voltage Termination Style

Code Color Code Type Code Description

0Amber 324V AC/DC Blank Standard screw
3 Green 5120V AC RRing lug
4Red 7240V AC
5Yellow
6Blue
7Clear

24V AC/DC 120V AC 240V AC

Cat. No. Cat. No. Cat. No.

800FD-P3N3 800FD-P3N5 800FD-P3N7

1

800FD – P 3 N 7

800FD-P4N3 800FD-P4N5 800FD-P4N7
800FD-P5N3 800FD-P5N5 800FD-P5N7

abc

Bulletin 800FD 22.5 mm Monolithic Push Buttons Pilot Light Devices

Vol tag e

Incandescent

Lens and LED Color Pkg. Quantity

Green

Yellow

Code Color Code Type Code Description

(1) Only valid with “no bulb” option.
(2) Only valid with “no lens” option.

Vol tag e

24V AC/DC 120V AC

Cat. No. Cat. No.

800FD-P3D3 800FD-P3D5

Red

abc

Lens Cap Voltage Termination Style

0Amber 0
3 Green 16V AC/DC RRing lug

4Red 212V AC/DC
5Yellow 324V AC/DC
6Blue 448V AC/DC
7Clear 5120V AC/DC

9

No lens

(1)

1

800FD – P 3 D 5

abc

No bulb

800FD-P4D3 800FD-P4D5
800FD-P5D3 800FD-P5D5

(2)

Blank Standard screw

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 83

Bulletin 800FD 22.5 mm Monolithic Push Buttons Selector Switch Operators

Selector Switch Operators

Non-illuminated

Operator Type Contact Configuration Pkg. Quantity

1 N.O.
1 N.C.

Maintained

Spring Return From Both

ab c

Operator Function Termination Style Contact Module

Code Description Code Description Code Number of N.O. Number of N.C.

M2 Maintained, 2-position XStandard screw

L2 Return from left, 2-position RRing lug
R2 Return from right, 2-position 11 1 1

M3 Maintained, 3-position 02 0 2

L3 Return from left, 3-position 20 2 0
R3 Return from right, 3-position
B3 Return from both, 3-position

(1) Only available for 2-position selector switch.

2 N.O. 800FD-SM22X20 800FD-SM32X20
2 N.C.

1 N.O.,1 N.C.

2 N.O. — 800FD-SB32X20
2 N.C.

1 N.O.,1 N.C.

800FD – S L3 2 X 11

2-position 3-position

Cat. No. Cat. No.

800FD-SM22X10 —
800FD-SM22X01 —

1

abc

800FD-SM22X02 800FD-SM32X02

800FD-SM22X11 800FD-SM32X11

— 800FD-SB32X02
— 800FD-SB32X11

(1)

01

(1)

10

01

10

Table 43 - Selector Switch

2-Position 3-Position

Knob Position Knob Position

Contacts/

Contact Position

01 X — O — 11 O O X O X X
10 —O—X 02 OXXXXO

11 XOOX 20 XOOOOX
02 X X O O
20 O O X X

Note: X = Closed/O = Open

84 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Left Right Left Right

Contacts/

Contact Position

LeftRightLeftRightLeftRight

Bulletin 800FD 22.5 mm Monolithic Push Buttons Push-pull/Twist-to-release Mushroom Operators

Push-pull/Twist-to-release Mushroom Operators

2-position, Non-illuminated

IMPORTANT • All emergency stop operators are EN ISO 13850 compliant with standard NC, NCLB, or self-monitoring contact blocks.

• E-stop operators, latch, and contact block combinations have been third-party tested for B10d values. B10d values can
be found in publication SAFETY-SR001

Color Contacts Pkg. Quantity Cat. No.

Red

800FD – MT4 4 X 11

ab c

Color Cap Termination Style

Code Description Code Description Code Number of N.O. Number of N.C.

2Black XStandard screw 01 0 1
3 Green RRing lug 11 1 1
4Red 02 O 2

4E Red - EMO

5 Yellow
6Blue

(1) E-stops must contain at least one N.C. circuit.

1 N.C.

2 N.C.

.

1

abc

Contact Module

800FD-MT44X01

800FD-MT44X02

(1)

Plastic Enclosures — 1-hole Only

• Feed-through design

• Knockout sizes: PG 11/16

• Not UL Listed or CSA Certified

• Monolithic or latch-mounted contact blocks

•Double insulated

Type Pkg. Quantity

1-hole 1

(1) Can only use single deep contact block.

Plastic Enclosures (IP66, NEMA 4/4X/13)

Gray Yell ow

Cat. No. Cat. No.

800FD-1P 800FD-1PY

(1)

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 85

Bulletin 800FD 22.5 mm Monolithic Push Buttons Assembled Stations

Assembled Stations

Enclosure Color Quick Connect Operator Type Contact Configuration Cat. No.

1 N.O. 800FD-1SP5

1 N.O./1 N.C.

Gray

Yellow

—

DC Micro 4-pin

—

DC Micro 4-pin

2-position selector switch

Red 40 mm push-pull/twist-to-release 1 N.O./1 N.C.

Replacement Parts

Table 44 - Replacement Lamps

Lamp Type Typical Current Voltage ANSI No. Pkg. Quantity Cat. No.

150 mA 6V AC/DC 755

Full Voltage

Incandescent

Cat. No. 800F-N130

80 mA 12V AC/DC 756
70 mA 24V AC/DC 757 800F-N157
50 mA 48V AC/DC 1835
22 mA 130V AC/DC 949

10

800FD-1SP6

800FD-1SP6Q

800FD-1SYP2

800FD-1SYP2Q

800F-N65
800F-N141

800F-N48

800F-N130

Neon 2 mA 240V AC — 800F-N240

Cat. No. 800F-N240

Table 45 - Replacement Lenses

Lens Color Pkg. Quantity Cat. No.

Amber

Green

Red 800FD-AP4

Yel low

Blue

Clear 800FD-AP7

(1) Sold in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.

10

800FD-AP0
800FD-AP3

(1)

800FD-AP5
800FD-AP6

86 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Specifications

→

Bulletin 800FD 22.5 mm Monolithic Push Buttons Specifications

IMPORTANT

Performance Data — Performance data that is given in this publication is provided only as a guide for you to determine suitability

and does not constitute a performance warranty of any kind. Such data can represent the results of accelerated testing at
elevated stress levels, and you are responsible for correlating the data to actual application requirements. ALL WARRANTIES AS TO
ACTUAL PERFORMANCE, WHETHER EXPRESS OR IMPLIED, ARE EXPRESSLY DISCLAIMED.

Mechanical Ratings

Vibration (assembled to panel) Tested at 10…2000 Hz, 1.52 mm displacement (peak-to-peak) max/10 G max for 3 hr duration, no damage
Shock Shock Tested at 1/2 cycle sine-wave for 11 ms; no damage at 100 G
Degree of protection IP66 (Type 3/3R/4/4X/12/13)

Mechanical durability per
EN 60947-5-1 (Annex C)

Operating forces E-stop = 36 N
Operating torque

(typical application with one contact block)

Contact operation

Push button travel to change
electrical state

Temperature range (operating)
Temperature range (short-term storage) -40…+85 °C (-40…+185 °F)

Humidity ≤95% RH from 25…60 °C (77…140 °F)

Standard contact block ratings

Low-voltage contact block ratings

LED Module Ratings

Thermal current 5 A max enclosed (40 °C [104 °F] ambient) to UL 508, EN/IEC 60947-5-1
Insulation voltage (U

Wire capacity (screw terminal)

Recommendations for ring lug termination option
Recommended tightening torque on screw terminals 0.7…0.9 N•m (6…8 lb•in)
Dielectric strength (min) 2500V for 1 minute
External short circuit protection 5 A Type gL/gG cartridge fuse to EN 60269-2-1 or gN (Class J to UL 248-8 or Class CC to UL 248-4)
Electrical shock protection Finger-safe conforming to IP2X

(1) Operating temperatures below 0 °C (32 °F) are based on the absence of freezing moisture and liquids.
(2) 3M MV018-R/S (#22…18 AWG) or 3M MVU14-6R/S (#16…14 AWG)

)

i

300,000 cycles

2,000,000 cycles Momentary push buttons

N.O. Slow double make and break
N.C.
N.O. 2.5 mm (0.1 in.)

N.C. 1.5 mm (0.060 in.)

Environmental

Electrical Ratings

Nominal Voltage Range Current Draw Frequency

24V AC
24V DC

120V AC

240V AC

(2)

20…26V AC

18…30V DC

102…132V AC

204…264V AC

6.35 mm (0.250 in.) max outer diameter with 3.8 mm (0.148 in.) hole diameter

Slow double make and break — positive opening

EN/IEC 60947-5-1 and UL 508, 17V, 5 mA min

C300, R150, AC 15, DC 13 to EN 60947-5-1 and UL 508

Max (2) #14 AWG, uses same size wire only

Selector switch

Push-pull/twist-to-release E-stop

Selector switch = 0.25 N•m

-25…+60 °C (-13…+140 °F)

B300, R300
AC 15, DC 13

300VAC

5V, 1 mA DC min

32 mA
24 mA
22 mA
22 mA

300V

#18…14 AWG (0.75…2.5 mm²)

(1)

50/60 Hz

DC
50/60 Hz
50/60 Hz

Illumination

Green Red Ye llow Blue White

LED dominant wavelength 525 nm 629 nm 590 nm 470 nm —
LED luminous intensity 780 mcd 780 mcd 600 mcd 168 mcd 360 mcd
Incandescent wattage, max 2.6 W

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 87

Bulletin 800FD 22.5 mm Monolithic Push Buttons Approximate Dimensions

29.6

(1.17)

10

(0.39)

45.7 (1.8)

45.7 (1.8)

30.4
(1.2)

11.3

(0.44)

39.8

(1.57)

45.7 (1.8)

32.1

(1.26)

29.8

(1.17)

45.7 (1.8)

27.9
(1.1)

Materials

Springs Stainless steel and zinc-coated music wire Lens (pilot light) Acrylic
Electrical contacts Brass with silver-nickel contacts Bezel/bushing, housing Glass-filled polyester
Terminals Brass and phosphor bronze Legend frames Glass-filled polyamide
Panel gasket Nitrile and polyester-based TPE Mounting ring Glass-filled polyamide
Seal Nitrile Terminal screws Zinc-plated steel with chromate
Button cap/mushroom head Polyester/polycarbonate blend Lamp socket Brass and Phosphor bronze

Table 46 - Standards Compliance and Certifications

Certifications UL, CSA, CCC, CE
Conformity to standards — CE Marked UL 508, EN/ISO 13850, EN 60947-1, EN 60947-5-1, EN 60947-5-5
Terminal identification EN/IEC 60947-1

Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

Momentary Push Button Operators — Flush Momentary Push Button Operators — Extended

14

(0.55)

45.7 (1.8)

29.6

(1.17)

Pilot Light Devices 2-Position Push-pull/Twist-to-release Mushroom Operators

Plastic Enclosures Selector Switch Operators

Plastic Enclosures [mm (in.)]

Cat. No.

800FD-1P

800FD-1PY

No. of Units

(Holes)

1

ABCWeight

72

(2-27/32)59(2-5/16)41(1-5/8)

95 g

(3.5 oz)

88 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Instruction Sheet

30

A

B

A

4030 50

40

60 / 90

ø60, ø90

40 50

24.1

+0.4
–0

22.3

3.2

+0.2
–0

+0.4
–0

mm

OPTION

WAHL

OPZIONE

OPÇÃO

OPCIÓN

=

PLASTIC

PLASTIQUE

PLASTIK

PLASTICA

PLÁSTICO

B

A

2

3

2

2

1

1

+

,

E

M

E

R

G

E

N

C

Y

S

T

O

P

1

0,7 - 0,9 Nm
6 - 8 lb-in

1,7 Nm
15 lb-in

1- 10,5 mm

1- 7,3 mm

1- 9,3 mm

1- 8,5 mm

7 mm

0,75 - 1,5 mm

2

(#18 - #14 AWG)

ø 6,35 mm

50 mm

ø 3,8 mm

“R” option for ring connectors

option de “R” pour cosses à plage ronde

"R" Wahl für Ringkabelschuhe

opzione "R" per capicorda ad anello

opção de "R" para conectores do anel

opción de “R” para los conectadores del anillo

Use the same size wire only
Utiliser uniquement du fil de même dimension

usar sólo el mismo tamaño de cable

Nur Draht derselben Größe verwenden
utilizzare solo cavi della stessa dimensione
use somente fios do mesmo tamanho

or
ou

oder

o

Bulletin 800FD 22.5 mm Monolithic Push Buttons Instruction Sheet

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 89

Bulletin 800B 16 mm Push Buttons

Our 16 mm operators can meet your light industrial and instrumentation application needs with their highly configurable and flexible design.
These operators are excellent for applications with limited panel space or a small footprint. They are made of corrosion-proof plastic to
deliver long push button life.

Push Button and Pilot Light Operators

Operator Type

Momentary, push button/pilot light

Maintained, push button

(1) All operators are sold without a lens cap and diffuser.

(1)

Pkg.

Quantity

1

Round Cat. No. Square Cat. No. Rectangle Cat. No. Large Square Cat. No.

800B-EPA 800B-EPB 800B-EPC 800B-EPD
800B-EAA 800B-EAB 800B-EAC 800B-EAD

Lens Cap with Diffuser

Lens Color

(1) For illuminated devices, LED bulbs are color specific. (Green LED bulb with green lens caps, red LED bulbs with red lens cap, white LED bulbs with yellow, blue, and white lens cap.)

Incandescent bulbs can be used with any lens cap color.

(1)

Green

Red

Yellow

Blue

White 800B-ALA7 800B-ALB7 800B-ALC7 800B-ALD7

Pkg.

Quantity

1

Round Cat. No. Square Cat. No. Rectangle Cat. No. Large Square Cat. No.

800B-ALA3 800B-ALB3 800B-ALC3 800B-ALD3
800B-ALA4 800B-ALB4 800B-ALC4 800B-ALD4
800B-ALA5 800B-ALB5 800B-ALC5 800B-ALD5
800B-ALA6 800B-ALB6 800B-ALC6 800B-ALD6

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 90

Selector Switch Operators

Bulletin 800B 16 mm Push Buttons Selector Switch Operators

2-position Selector Switches 3-Position Selector Switches

Operator Type

Cat. No. 1 800B-SM2A 800B-SR2A 800B-SM3A 800B-SB3A

Operator Type

Cat. No. 1 800B-KM2A 800B-KR2A 800B-KM3A 800B-KB3A

(1) To illuminate a selector switch, add either an LED or incandescent bulb. All selector switches have a clear lens. Green and red LED bulbs can be used to change the selector switch color.

(1)

(1)

Pkg. Quantity

Maintained Return from Right Maintained Return from Both

Pkg. Quantity

Keyed, Maintained Keyed, Return from Right Keyed, Maintained Keyed, Return from Both

Table 47 - Target Table and Operator Position

Contact Block

Cat. No.

800B-PS11

800B-PS22

800B-PT01

800B-PT02

800B-PT11

(1) X = Closed, O = Open

Contact Block

Location

Top — — — ———

Bottom

Top

Bottom

Top — — — ———

Bottom N.C. X O O X X

Top

Bottom X O O X X

Top N. O. O X O O X

Bottom N.C. X O O X X

Contact Type

N.C. X O O X X
N.O. O X X O O
N.C. X O X X O
N.O. O X O O X
N.C. X O O X X
N.O. O X X O O

N.C.

2-position Target Table

XOXXO

(1)

3-position Target Table

(1)

Emergency Stop Operators

Table 48 - Non-illuminated, Twist-to-release (Trigger Action)

Description Pkg. Quantity

Emergency stop operator 1 800B-MT

(1) Operator is EN ISO 13850 compliant with standard slow make/break, direct drive N.C. contact blocks (Cat. Nos. 800B-PT01, 800B-PT02, and 800B-PT11).

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 91

Cat. No.

(1)

Bulletin 800B 16 mm Push Buttons Contact Block/Latch Module

Contact Block/Latch Module

Description Pkg. Quantity Cat. No.

Push Button/Selector Switch

1 N.O./1 N.C. snap action 1 800B-PS11

2 N.O./2 N.C. snap action 1

Pilot Light

Dummy block 1

(1)

Emergency Stop

(1) 800B-PT contact blocks must be used with an emergency stop operator to have a UL E-stop device.

/Push Button/Selector Switch

1 N.C. slow make/break 1 800B-PT01

2 N.C. slow make/break 1

1 N.O./1 N.C. slow make/break 1

800B-PS22

800B-PL

800B-PT02

800B-PT11

Replacement Parts and Accessories

Table 49 - Replacement Bulbs

Description Lamp Color Lamp Voltage Pkg. Quantity Cat. No.

Green

Light-emitting diode (LED)

Incandescent bulb

(1) Not available in 6V AC/DC.
(2) Not available in 120V AC.

92 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

bulb

(1)

(2)

Red

White

Clear

12…24V AC/DC

120V AC 800B-N5G

12…24V AC/DC

120V AC

12…24V AC/DC 800B-N3W

120V AC

6V AC/DC

12V AC/DC 800B-N2C

24V AC/DC

800B-N3G

800B-N3R
800B-N5R

1

800B-N5W

800B-N1C

800B-N3C

Table 50 - Accessories

Bulletin 800B 16 mm Push Buttons Replacement Parts and Accessories

Description Pkg. Quantity Cat. No.

Replacement mounting ring 10 800B-ARP

Mounting ring wrench 1

Bulb removal tool 1

Lens removal tool 1

Locking washer (anti-rotation) 10

Stab connector (insulated) 10

Hole plug 10

Replacement key 1

800B-AW2

800B-ALR1

800B-ALR2

800B-ALW1

800B-ATK

800B-N2

800B-AK1

Printed circuit board pin socket 10

Emergency stop legend plate 1

Square bezel 10

Rectangle bezel 10

Large square bezel 10

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 93

800B-APCB

800B-15YE112

800B-ABZB

800B-ABZC

800B-ABZD

Bulletin 800B 16 mm Push Buttons Specifications

→

Specifications

Mechanical Ratings

Vibration (assembled to panel) Tested at 10…2000 Hz, 1.52 mm displacement (peak-to-peak) max/10 G max for 6 hr duration, no damage
Shock Tested at 1/2 cycle sine-wave for 11 ms; no damage at 100 G

Degree of protection

Mechanical durability per
EN 60947-5-1 (Annex C)

Operating forces (typical with one contact block) Extended = 5…8 N / E-stop = 14…16 N
Operating torque (typical application with one contact block) Selector switch = 0.06 N•m (0.5 lb•in)
Mounting torque 1.1 N•m (10 lb•in)

Temperature range (operating) -25…+55 °C (-13…+131 °F)
Temperature range (short-term storage) -40…+70 °C (-40…+158 °F)
Humidity ≤95% RH from 25…60 °C (77…140 °F)

Vibration (assembled to panel) Tested at 10…2000 Hz, 1.52 mm displacement (peak-to-peak) max/10 G max 6 hr
Shock Tested at 1/2 cycle sine-wave for 11 ms and no damage at 100 G max
Contact durability 200,000 cycles (Cat. No. 800B-PS_)

Contact operation

Push button travel to change electrical state 1.4 mm (0.06 in.)

Operating forces (typical)

Standard contact block ratings AC 15, B300, 1.5 A/240V AC, 3 A/120V AC / DC 13, R300, 0.1 A/250V DC, 0.22 A/125V DC

LED Module ratings

Thermal current
Insulation voltage (U
Stab termination 2.8 x 0.5 mm
Dielectric strength, min 1500V 1 min.
External short circuit protection – standard blocks 6 A type gL/gG cartridge fuse to EN 60269-2-1 or gN (Class J to UL 248-8 or Class C to UL 248-4)
Electrical shock protection Fingersafe conforming to IP2X

(1) Keyed selector switches do not meet 4X rating.
(2) 800B-PT contact blocks must be used with an emergency stop operator to have a UL E-stop device.

(1)

2,000,000 Cycles Push buttons – momentary
1,000,000 Cycles Push buttons – maintained
250,000 Cycles Selector switch
200,000 Cycles Key selector switch
200,000 Cycles Twist-to-release E-stop

Environmental

Mechanical Ratings — Contact Blocks

N.O. / N.C. Snap action
N.C.
N.O. Slow make/break

Electrical Ratings

Nominal Voltage Current Frequency

12…24V AC
12…24V DC

120V AC

)

i

12 mA
12 mA

9 mA

Slow make/break — positive opening

IP66, Type 4/4X/13

(2)

1 contact block = 3 N

2 contact blocks = 6 N

= 5 A (AC), Ith = 1 A (DC)

I

th

300V

50/60 Hz

DC

50/60 Hz

Illumination

LED Dominant wavelength

LED Luminous intensity

Incandescent wattage, max 1.2 W

Springs

Electrical contacts Gold-plated silver

Stab terminals

Lenses Polycarbonate RoHS Compliant Yes

Green
Red
White

Green
Red
White

Materials

Stainless steel and gold-plated,

525 nm
624 nm

—

500 mcd
400 mcd

1000 mcd

Standards Compliance and Certifications

high-carbon steel

Phosphor bronze with

gold or nickel plating Terminal Identification EN/IEC 60947-1

Certifications UR, CSA, CCC, CE

Standards Compliance

UL 508, EN ISO 13850, EN 60947-1,

EN 60947-5-1, EN 60947-5-5

94 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Operator Assembly Sequence

Bulletin 800B 16 mm Push Buttons Operator Assembly Sequence

* Optional

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 95

Bulletin 800B 16 mm Push Buttons Approximate Dimensions

18

(0.71)

12

(0.47)

42.4 (1.67)

54.4 (2.14)

24

(0.94)

12

(0.47)

42.4 (1.67)

54.4 (2.14)

24

(0.94)

24

(0.94)

26

(1.02)

30

(1.18)

42.4 (1.67)

72.4 (2.85)

Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

Round

18

(0.71)

Square

18

(0.71)

tangle

Rec

18

(0.71)

12

(0.47)

12

(0.47)

42.4 (1.67)

54.4 (2.14)

18

(0.71)

42.4 (1.67)

54.4 (2.14)

36 (1.42)

18

(0.71)

12.3

(0.48)

42.4 (1.67)

54.7 (2.15)

14

(0.55)

42.4 (1.67)

56.4 (2.22)

Large Square

Emergency Stop

96 Rockwell Automation Publication 800-TD008D-EN-P - May 2021

Hole Patterns

18

(0.71)

18 (0.71)

1.7

(0.07)

+0 (0)

-0.1 (0.003)

15

(0.59)

+0.1 (0.003)

-0 (0)

Ø16

(0.63)

+0.2 (0.01)

-0 (0)

Bulletin 800B 16 mm Push Buttons Approximate Dimensions

Round and Square Rectangle

24

(0.94)

Large Square Emergency Stop

24

(0.94)

40

(1.57)

18 (0.71)

Printed Circuit Board Pin Socket

18 (0.71)

max

10 (0.39)

max

24 (0.94)

18 (0.71)

max

0.87

(0.03)

13.65 (0.54) ± 0.2 (0.01)

6 (0.24)
± 0.12 (0.005)

7.2 (0.28)

10 - Ø1.1 (0.04)

± 0.12 (0.005)

40

(1.57)

4.25 (0.17)

± 0.2 (0.008)

0.3

(0.1)

12 (0.47)
± 0.12 (0.005)

14.4 (0.57)

± 0.12 (0.005)

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 97

Bulletin 800MR/MB Oiltight Operators

Flush Head Unit

Cat. No. 800MR-A1B

Extended Head Unit

Cat. No. 800MR-B2A

Mushroom Head Unit

Cat. No. 800MR-D2B

Our oiltight operators are tough and rugged for your heavy-duty applications. Our push buttons are Type 13 oiltight, and are built for
durability and harsh environments.

Bulletin 800MR Bulletin 800MB

• 22.5 mm mounting hole

•Type 13 oiltight

• Round operators

• 22.5 mm mounting hole

• Type 13 oiltight

• Square backlit operators

Momentary Contact Push Buttons — 800MR

Non-illuminated

d

800MR – A 1 A

abcd

abc d

Operator Type

Code Description Code Description Code Description Code Description

AFlush head 1 Green Blank No contacts Blank Stab terminals
B Extended head 2Black A 1 N.O. - 1 N.C. KLarge screw
D Mushroom head 3Orange A2 2 N.O.

(1) Guards must be ordered separately.
(2) Logic Reed and small screw blocks can be ordered separately.

(1)

Button Color Standard Contact Cartridges

4Gray A3 1 N.O.E.M. - 1 N.C.L.B.
5White A4 2 N.C.
6Red A7 1 N.C.L.B. - 1 N.C.
7Blue B 2 N.O. - 2 N.C.
9 Yellow D1 1 N.O.

D2 1 N.C.

Contact Block Termination Type

(2)

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 98

Bulletin 800MR/MB Oiltight Operators Momentary Contact Push Buttons — 800MR

Flush Head Unit

Cat. No. 800MR-QA24GA

Extended Head Unit

Cat. No. 800MR-PB16RA

Mushroom Head Unit

Cat. No. 800MR-QMB24RA

Illuminated

d

800MR – PA L 24 R

abcdef

abcd

Operator Illumination Options Input Voltage Lens Color

Trans former

Code Description

PA

Flush

(1)

PB Extended L

PMB Mushroom 10

Full Voltage Transformer

Code Description Code Description WWhite

QA

Flush

(1)

QB Extended 26 240V AC 50/60 Hz Blank

QMB Mushroom

Code Description Full Voltage Code Color

Blank

Standard illumination as

determined by power module

type

(4)

LED

Code Description AAmber

12 12 24V AC/DC BBlue

24 24 24V AC/DC CClear

120V AC

(5)

G Green
RRed

16 120V AC 50/60 Hz X No lens with contact blocks

No lens without contact

blocks

ef

Standard Contact Cartridges

Contact Block Termination Type

(3)

Code Description Code Description

Blank No contacts Blank Stab terminals

A 1 N.O. - 1 N.C. K Large screw
A2 2 N.O.
A3 1 N.O.E.M. - 1 N.C.L.B.
A4 2 N.C.
A7 1 N.C.L.B. - 1 N.C.

B

2 N.O. - 2 N.C.

(2)

D1 1 N.O.

D2 1 N.C.

(1) Guards must be ordered separately.
(2) Only available with full-voltage power module option and standard stab terminations.
(3) Logic Reed and small screw blocks must be ordered separately.
(4) LEDs available in red, green, amber, blue, and white. LED color must match lens color, except clear lens supplied with white LED and white lens supplied with amber LED.
(5) Only available with LED Illumination option.

Rockwell Automation Publication 800-TD008D-EN-P - May 2021 99

Bulletin 800MR/MB Oiltight Operators Push-pull and Push-pull/Twist-to-release Units — 800MR

2-position Push-pull

Cat. No. 800MR-FX6A

2-position Push-pull/Twist

Cat. No. 800MR-FXT6A4

3-position Push-pull

Cat. No. 800MR-FXN6A7

Push-pull and Push-pull/Twist-to-release Units — 800MR

2-position Push-pull and Push-pull/Twist-to-release and 3-position Push-pull Units, Non-illuminated

800MR – FX T 6 A (2-position)

abcdef

800MR – FX N 6 A (3-position)

a

b

cdef

1

ab

Operator Type Operator Function, 2-position

Code Description Code Description

FX Push-pull unit Blank Maintained — push-pull Blank Non-illuminated

T Twist-release

Operator Function, 3-position

Code

N Momentary Maintained Momentary

b

1

(1)

Operator Position

Out Center In

c

Operator

Code Color

de f

Button Color Contact Cartridges

Contact Block Termination Type

(2)

Code Color Code Description Code Description

1Green Blank No contacts Blank Stab terminals
2Black A 1 N.O. - 1 N.C. K Large screw
3Orange A2 2 N.O.
4Gray A4 2 N.C.
5White A7 1 N.C.L.B. - 1 N.C.
6Red B 2 N.O. - 2 N.C.
7Blue D1 1 N.O.
9Yellow D2 1 N.C.

Blank No cap Note: See Table 51 for target description.

(1) Not available in twist release.
(2) Logic Reed and small screw blocks must be ordered separately.

100 Rockwell Automation Publication 800-TD008D-EN-P - May 2021