Allegri 021721017FR001, 021721032FR001 User Manual

021721-017-FR001 2-Light Wall Sconce

Customer Service :[phone],[phone],[e-mail]
WARNING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that
the power is off.

3.DO NOT install bulb which exceeds the maximum wattage specified on the socket label.

Step 1. Place mount mounting and wiring steps before
Glass shade installation step

Step 2. Lnstall candelabra bulb,do not use
bulbs that exceeds 60W

60W BULBS

Crystal tr a y

Cannula

Main body

021721-017-FR001 2-Light Wall Sconce

Customer Service :[phone],[phone],[e-mail]

Step 4. Fasten 2 (state specification of screw )

into mounting plate so that they extend
away from wall when mounting plate is
installed

Step 5. Attach the mounting plate to outlet box

with screws

Step 6. Refer to wiring diagram.

Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector

Step 7. Carefully tuck in all wires Attach the

back plate with the mounting screw on
the crossbar.Secure fixture with shell
knobs.

ELECTRICAL BOX

MOUNTING BLOCK

L

N

G

T)SCENANDENC (IKETSOC

FLAT SCREW

8/32" SCREW

LAMP BODY

RESSE WIHOU

Black & white supply wires

Fixture black and white wires

Change to black and white

UNDGRO

SERWI