
020920-010-FR001 2-Light wall lamp
Customer Service: (702) 361-4345, (800) 525-2655, customer.service@kalco.com
WARNING! - TO REDUCE RISK OF FIRE OR INJURY:
1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture, make sure you have enough qualified help.
2.Turn the power off to the fixture's circuit at the service panel. Use a voltage detector to verify that
the power is off.
3.DO NOT install bulb which exceeds the maximum wattage specified on the socket label.
FRAME INSTALLATION:
Step 1. Screw Crossbar 2 to outlet box 1 with
original outlet box screws. Make sure
crossbar studs are pointing away from wall.
Step 2. Get fixture frame 3 a few inches close to
wall and connect wires: Connect fixture ribbed
wire to power supply black wire. Connect fixture
smooth wire to power supply white wire. Connect
fixture silver or copper bare wire to power supply
green wire.
Step 3. Align back plate holes to crossbar studs
2 and fix it flat to wall, secure fixture with
decorative nuts 4, then Install light bulbs.
NOTE: Use bulbs 40w max
Step 4. Install threaded rod 5 to bottom of
fixture, then install parts 6, 7, 8 and 9 and 10.
N
1-Outlet box with screws x 2
2-Crossbar with Studs x 2
3-Frame wit h c rystal beads
assembled on top banding
L
G
4-Decorative nuts
x 2.
5-Threaded rod
6-Metal plate
7-Chrome hex nut
8-Crystal Bobeche
9-Bobeche fitter
10-Finial
Proceed to install crystal set as shown on page
2 and 3.
P. 1

020920-010-FR001 2-Light wall lamp
Customer Service :(702)361-4345,(800)525-2655,customer.service@kalco.com
CRYSTAL TRIMMING INSTRUCTIONS:
A
B
INSTRUCTIONS:
Step 1. Unwrap and lay down all crystal parts
on a soft clean cloth. Organize and identify
crystal parts, use cotton gloves for installation.
Step 2. Note: All crystals (A) comes factory
assembled.
Step 3. Hung 17 crystal strands (B) to top ring
Step 4. Hung crystal sphere (C) to bottom of
fixture.
A
701 40# 1pcs
10mm
C
CODE QTY
A 39
B 17
C 1
1080 24# 2pcs
1080 22# 1pcs
1080 20# 2pcs
1080 18# 1pcs
1080 16# 1pcs
P. 2
C
1080 14# 1pcs
1080 12# 1pcs
B