Allegri 020321010FR001 User Manual

020321-010-FR001 5-Light wall lamp

Customer Service :[phone],[phone],[e-mail]
WARMING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electricalwiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a coltage detector to verify that
the power is off.

3.DO NOT install bulb which exxeeds the maximum wattge specified on the socket label.

Step 1. Place mount mounting and wiring steps before
crystal installation step

Step 2.

Step 3.

610-22*63
7PCS

Install E12 bulbs bulb,do not use
bulbs that exceeds 40W.

Finally,check the installation,thecrystal hanging
on the iamp body.

8

Plastic tube

0

1

ø

385

735

0

1

ø

180

Plastic tube

0

1

ø

MAIN BODY

40W BULBS

Plastic tube clip the gap
of the lamp body

A

B

611-22*63
1PCS

A(7Pcs)

170

MAIN BODY

Plastic tube clip the gap
of the lamp body

B(15Pcs)

020321-010-FR001 5-Light wall lamp

Customer Service :[phone],[phone],[e-mail]

Step 4. Fasten 2 (state specification of screw )

into mounting plate so that they extend
away from wall when mounting plate is
installed

Step 5. Attach the mounting plate to outlet box

with sorews

Step 6. Refer to wiring diagram.

Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector

Step 7. Carefully tuck in all wires Attach the

backplate with the mounting screw on
the crossbar.Secure fixture with shell
hnobs.

SOC

KET

ELECTRICAL BOX

MOUNTING BLOCK

L

N

G

ANDE

NC (I

T)SCEN

Black & white supply wires

DECORATIVE NUTS

LAMP BODY

RESSE WIHOU

Fixture black and white wires

Change to black and white

UND

GRO

SERWI