Allegri 012122010FR001, 012122045FR001 User Manual

esAs

mbly & Installati

ton Ins

ructions f

012122 2-Light Wall Sconce

r:o

Customer Service :[phone],(800)5 25-2 65 5,cu sto me r .ser v ice@ka lco .co m

8931尖子

WARNING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that
the power is off.

3.DO NOT install bulb which exceeds the maximum wattage specified on the socket label.

Fixtur e Assembly

Step 1. Place mount mounting and wiring steps before
Glass shade installation step

Step 2. Lnstall candelabra bulbs,do not use
bulbs that exceeds 40W

Crystal tray

40W BULBS

Main body

esAs

mbly & Installati

012122 2-Light Wall Sconce

Customer Service :[phone],(800)5 25-2 65 5,cu sto me r .ser v ice@ka lco .co m

Fixtur

e Assembly

ton Ins

ructions f

r:o

Step 4. Fasten 2 (state specification of screw )
into mounting plate so that they extend
away from wall when mounting plate is
installed

Step 5. Attach the mounting plate to outlet box
with screws

Step 6. Refer to wiring diagram.
Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector

Step 7. Carefully tuck in all wires Attach the
back plate with the mounting screw on
the crossbar.Secure fixture with shell
knobs.

SOC

KET

ELECTRICAL BOX

MOUNTING BLOCK

FLAT SCREW

L

N

G

LAMP BODY

ANDE

SCEN

T)

Black & white supply wires

RESSE WIHOU

(I

NC

Fixture black and white wires

Change to black and white

UND

GRO

ERWI

S