Alco Electronics W101 User Manual

Equipment tested for
compliance as a
complete unit

WT19303W87

Turning on your tablet for the first time

Tablet docking

Pr ess an d h ol d t he Po wer bu tto n 4 ~5
seconds until the RCA logo appears.

Select the region and language, then tap

and

follow the onscreen instructions to setup the tablet.

Be sure your home Wi-Fi network is turned on and connected to the inter net.

To wall outlet

NOTE

The keyboard connects to the tablet via the Connector. When the connection is successful, the tablet will
automatically adjust its settings to use the keyboard.

Remove tablet from keyboard

Power off the tablet

Turn on the tablet in standby mode

Press the Powe r butto n to tur n on th e
tablet screen.

Swipe up the lock screen from
the bottom edge of the display.

Sleep / Standby mode

Press the Power button to turn off the tablet screen.

You can shut down your tablet by doing either of the following:

a. If you r tab let is un respo nsive , Pr ess and h ol d the

Pow er

but ton unt il th e me ssa ge " Sli de t o

shut down you PC" appears.

b. Slide

to the bottom edge of the display, then the

tablet will be completely powered off.

Tap Se ttin gs fr om the Char ms bar, t hen t ap

Power

and select Shut down to do a normal shutdown.

Volume +/-

Connector

Use to connect the tablet
to keyboard.

Touch pad

Keys

There are two ways to dock the tablet onto the keyboard.

or

Quick Start Guide

Getting To Know Your Tablet

Windows button

Press to open/close
the Windows Star t
screen.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment ha s been tested and found to comply with the li mits for a Class B digital device, pursuant to Part 15 of FCC Rules.
These limit s are designe d to provide reas onable p rot ecti on ag ains t har mfu l i nte rfer ence i n a res iden tia l i nst alla tion . T his
equi pment generates, use s, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no g uarantee that inter ference will not occur in a par ticular

insta llation. If th is equ ipment does cause harm ful
interference to radio or television reception, which can b e deter mined by tur ning t he equ ipment off a nd on, the user is encourag ed
to try to correct the interference by one or more of the following measures:

sReorient or relocate the receiving antenna.

sIncrease the separation between the equipment and receiver.

sConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.

sConsult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance (MLB International Inc., PO Box 1214,
Lockport, NY, 14095, Tel: [phone]) could void the user’s authority to operate the equipment.

CAN ICES-3(B) / NMB-3(B)

Warning: the AC adapt er is used as disc onnect devi ce an d it shou ld re main r eadily oper able durin g inte nded use. In o rder to

disconne ct the main s plug from mains c ompletely, the AC adapter should be disconne cted from t he mains so cket outlet completely.

Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be
observed during handling and use.

sRead these instructions.

sKeep these instructions.

sHeed all warnings.

sFollow all instructions.

sDo not use this apparatus near water.

sClean only with dry cloth.

sDo not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

sDo not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that produce

heat.

sProtect the power cord from being walked on or pinched particularly at plugs, conve nience receptacles, and the point where they

exit from the apparatus.

sOnly use attachments / accessories specified by the manufacturer.

sUnplug this apparatus dur ing lightning storms or when unused for long periods of time.

sRefer all ser vicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as

power-supply cord or plug is dam aged, liquid has b een spilled or ob jects have fallen into the apparatus, th e apparatus has bee n
exposed to rain or moisture, does not operate nor mally, or has been dropped.

IMPORTANT SAFETY INSTRUCTIONS

ADDITIONAL SAFETY INFORMATION

sThe AC adapter and apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall

be placed on the apparatus.

sAlways leave sufficient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet

that may prevent air flow through vent openings.

sDo not place lighted candles, cigarettes, cigars, etc. on the product.

sCare should be taken so that objects do not fall into the product.

sDo not attempt to disassemble the cabinet. This product does not contain customer serviceable components.

sTo prevent the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

sDo not play your headset at high volume. Hearing experts warn against extended high-volume play.

Copyright and Trademark Notices

Intel Inside logo is trademarks of Intel Corporation in the U.S. and /or other countries, Copyright Intel Corporation, 2015. All rights
reserved.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
The

Bluetooth

®

word mark and logos are registered trademarks owned by the

Bluetooth

SIG Inc. Other trademarks and trade names are

those of their respective owners.

About HDMI

High-Definition Multimedia Interface(HDMI) is a high-speed digital interfacethat can transmit uncompressed highdefinition video and digital
multichannel audio. It delivers high quality picture and sound quality.HDMI is fully backward compatible with DVI. As required by the HDMI
standard, connecting to HDMI or DVI products without HDCP (High bandwidth Digital Content Protection) will result in no Video o r Audio
output.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.

All other trademark appearing herein are the property of their respective owners. Specifications subject to change without notice.

This device complies with Industry Canada Licence-exempt RSS-210. Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of
the device.