Welcome! This manual brief is the profile of your USB-Modem, about the details of
This product meets applicable national SAR limits of
2.0W/kg.
The specific maximum SAR values can be found in the
following section of this user guide.
When carrying the product or using it while worn on your
body, either use an approved accessory such as a holster
or otherwise maintain a distance of 5 mm from the body
to ensure compliance with RF exposure requirements.
Note that the product may be transmitting even if you are
not making a phone call.
how to set the management parameters, see help information on the web
management page.
Getting to Know Your Modem
1. USB Interface
2. Cap
3. Strap Hole
4. Indicator LED
5. SIM/USIM Card Slot
Note:
You can tie the cap and modem by threading a strap through the strap hole to avoid cap
missing.
How to start your modem
1. Remove the cap from the USB modem.
2. Insert the SIM/UMSIM card into card slot on back of modem.
3. Insert the USB modem into computer’s USB port.
4. When the installation is complete, the modem ’s web management page is