This device meets applicable national SAR
limits of 2.0W/kg. The specific maximum
SAR values can be found on page 28 of this
user manual.
Your WATCH �������������������
1
1�1 Wearing
Open
Take out your watchband from the ring sleeve, unbuckle the band and
open the clasp.
Wear
• Put it around your wrist and cross the watchband through the clasp.
• Move the clasp along the band to adjust the watchband size to fit your
wrist.
• Close the clasp until it clicks.
• Cross the watchband through the ring sleeve to secure your WATCH.
21
Watchband adjustment
Open the clasp and adjust the watchband size to fit your wrist.
1�2 Keys and sensor
Power key
Back button
NFC
sensor
Power key
• Press: Turn on/off screen.
• Press and hold: Power on/off WATCH. Press and hold for 10 seconds to
restart WATCH.
Back button
• Tap to go back to the previous screen.
• Tap to dismiss notifications only on WATCH.
NFC sensor
Tap it to the NFC antenna of your phone to quickly pair WATCH with
your phone.
43
1�3 Vibration reminding
Your WATCH vibrates to remind you of:
• Notifications
• Call, alarm, calendar, event, etc.
• Low battery
• Disconnection with your phone
1�4 USB charging
Open the USB port cover at the end of the watchband. Connect your
WATCH with a computer to charge via USB. Make sure that the chip on
WATCH is correctly inserted. Otherwise, it won't charge.
The following instructs you to correctly charge WATCH.
The left picture shows the correct insertion and the right one shows the
incorrect charging.
1�5 Power on your WATCH
Hold down the Powe r key until WATCH powers on. It will take a few
seconds before the screen lights up.
1�6 Power off your WATCH
You can power off your WATCH in the following two ways:
• Hold down the Powe r key. Swipe icon right or left to power off your
WATCH. Touch Back button to cancel power-off operation.
• Keep holding down the Power key for around 8 seconds.
65
Pairing �������������������������������
2
2�1 NFC pairing
If your phone supports NFC and Onetouch Move is installed, you can
quickly pair your phone with WATCH by using NFC.
2�2 Bluetooth Pairing
• Start Onetouch Move. After completing your profile, touch Connect
Your Watch.
• Turn on Bluetooth on your phone.
Find the logo and tap it to the NFC antenna in your phone.
• Select your WATCH in Available Devices list, then touch it to connect.
• Swipe icon left on your WATCH to confirm connection. Swipe icon
right to reject pairing.
87
1. Keep your WATCH's screen on if your phone cannot detect
any Bluetooth device. Your WATCH's Bluetooth will be disabled
for power saving if it has not paired with any device a long time
after its screen is off.
2. WATCH can be connected only through the Bluetooth
searching in Onetouch Move.
Screen �������������������������������
3
Tap on watch
face to access
Home screen Main menu screen
main menu
screen.
Tap Back button to
access Home screen.
The screen is
provided in an
extended format.
You can swipe left/
right to view the
extended screen.
109
Loading...
+ 20 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.