Alcatel 6450-24, 6450-P24, 6450-24X, 6450-P24X, 6450-24XM USER MANUAL

...

ALCATELLUCENT OMNISWITCH 6450

STACKABLE GIGABIT ETHERNET LAN SWITCH FAMILY

The Alcatel-Lucent OmniSwitch® 6450 Stackable Fast Ethernet and Gigabit Ethernet LAN value switch family offers versatile, 24/48-port ﬁxed conﬁguration switches with 10 GigE uplinks and provides upgrade paths for 10 Gigabit Ethernet (GigE) stacking, 10 GigE uplinks and metro Ethernet services.

Promoting a design optimized for ﬂexibility, scalability, and low power consumption, the OmniSwitch 6450 is an outstanding edge solution. It uses the ﬁeld-proven Alcatel-Lucent Operating System (AOS) to deliver highly available, secure, self-protective, easily managed and eco-friendly networks.

The OmniSwitch 6450 family is embedded with the latest technology innovations and offers maximum investmentprotection.

The following types of deployments beneﬁt from the OmniSwitch 6450 family:

• Edge of small-to-mid-sized networks

• Branch ofﬁce enterprise and campus workgroups

• Residential and commercially managed service applications

• Service provider network deployments

• Enterprise-wide cost reduction through hardware consolidation to achieve network segmentation and security without additional hardware installation

• Supports cost-effective installation and deployment with automated switch setup and conﬁguration and end-to-end virtual LAN (VLAN) provisioning

• Simpliﬁes metro Ethernet network OA&M for service providers

OmniSwitch 6450-24/P24/24X/P24X/24XM

OmniSwitch 6450-48/P48/48X/P48X

OmniSwitch 6450-U24/U24S/U24X/U24SXM

BENEFITS

• Meets all customer conﬁguration needs and offers excellent investment protection and ﬂexibility with easy deployment, operation, and maintenance

• Provides outstanding performance when supporting real-time voice, data, and video applications for converged scalablenetworks

• Ensures efﬁcient power management, reduces operating expenses (OPEX) and lowers total cost of ownership (TCO) through low power consumption and dynamic PoE allocation, which delivers only the power needed by the attacheddevice

• Field-upgradeable solution makes the network highly available and reducesOPEX

• Fully secures the network at the edge at no additional cost

FEATURES

• 24-port and 48-port, Power over Ethernet (PoE), non-PoE, and 24-port ﬁber models with two ﬁxed small form factor pluggable (SFP+) 10-G-ready interfaces (“X” models) and 10G-ready interfaces (“non-X” models)

• Scalability from 24 to 384 Fast Ethernet and gigabit ports with 16 10 GigE ports

• Optional SFP+ stacking module

• Optional 10 GigE uplink license option for “non-X” models

• Optional metro services feature license on “non-M” models for service provider deployments

• Support for IEEE 802.3af as well as IEEE

802.3at-compliant PoE

• Support for Precision Timing Protocol (PTP) through IEEE 1588v2 (“S” models only)

• Internal AC or DC -redundant power supplies

MANAGEMENT

• AOS ﬁeld-proven software managed through a web interface (WebView), command line interface (CLI), and Simple Network Management Protocol (SNMP)

• Support for programmable AOS OpenFlow for the creation of specialized services.

• Ethernet operations, administration and management (OA&M) support for service conﬁguration and monitoring

• Supported by Alcatel-Lucent OmniVista® 2500 Network Management System (NMS)

• Alcatel-Lucent 5620 Service Aware Manager (SAM) applications for serviceproviders

SECURITY

• Flexible device and user authentication with Alcatel-Lucent Access Guardian (IEEE

802.1x/MAC/captive portal) with Host Integrity Check (HIC) enforcement

• Enables deployment of comprehensive and secure bring your own device (BYoD) services in enterprise networks, such as guest management, device on-boarding, device posturing, application management, and dynamic change of authentication(CoA).

• Advanced Quality of Service (QoS) and Access Control Lists (ACLs) for trafﬁc control, including an embedded denial of service (DoS) engine to ﬁlter out unwanted trafﬁc attacks

• Extensive support for user-oriented features, such as learned port security (LPS), port mapping, Dynamic Host Conﬁguration Protocol (DHCP) binding tables, and User Network Proﬁle (UNP)

PERFORMANCE AND REDUNDANCY

• Advanced layer-2+ features with basic layer-3 routing for both IPv4 and IPv6

• Triple speed (10/100/1000) user interfaces and ﬁber interfaces (SFPs) supporting 100Base X or 1000Base-X optical transceivers

• 10 G uplinks with all “X” models

• Wire-rate switching and routingperformance

• High availability with virtual chassis concept, redundant stacking links, primary/secondary unit failover, hot-swappable power options and conﬁguration rollback

CONVERGENCE

• Enhanced Voice over IP (VoIP) and video performance with policy-based QoS

• Future-ready support for multimedia applications with wire-rate multicast

• Airgroup™ Network Services for Bonjour speaking devices providing a consistent experience over wireless and wirednetworks

• IEEE 802.3at PoE+ support for IP phones, wireless LAN (WLAN) access points and video cameras

TECHNICAL INFORMATION

All models ship with two ﬁxed SFP+ ports. ”X”-models uplinks operate at 10 Gb/s by default and non-X models operate at 1Gb/s by default. Operation at 10 Gb/s for non-X models requires installation of the OS6450-SW-PERF license. These models also offer a two-port expansion slot for additional gigabit uplinks or 10Gb/s stacking modules. Both PoE and non-PoE models are full rack width, power optimized, ﬁxed conﬁguration chassis in a 1U form factor. Any “M” models offer metro ethernet services enabled by default and any “non-M” requires the OS6450-SW-ME for metro ethernet services to be enabled. The “S” models support IEEE 1588v2 Precision Timing Protocol (PTP) through end-to-end Transparent Clock (TC) for network-wide time-synchronizedapplications.

24/48 port models

CHASSIS 10/100

RJ45 PORTS

Non-PoE models

OS6450-24L 24 0* 2** 2 Internal AC Internal AC/DC

OS6450-48L 24 0* 2** 2 Internal AC Internal AC/DC

OS6450-24 0 24 2** 2 Internal AC Internal AC/DC

OS6450-24X 0 24 2 2 Internal AC Internal AC/DC

OS6450-24XM 0 24 2 2 Internal AC Internal AC/DC

OS6450-48 0 48 2** 2 Internal AC Internal AC/DC

OS6450-48X 0 48 2 2 Internal AC Internal AC/DC

10/100/1000 RJ45 PORTS

SFP+ GIGABIT UPLINK SFP+ 10 GIGABIT UPLINK

10 GB/S SFP+ STACKING EXPANSION MODULE PORTS

PRIMARY POWER BACKUP POWER

Alcatel-Lucent Omniswitch 6450

ALCATEL-LUCENT ENTERPRISE DATA SHE ET

PoE models

OS6450-P24L 24 0* 2** 2 Internal AC Internal AC

OS6450-P48L 24 0* 2** 2 Internal AC Internal AC

OS6450-P24 0 24 2 2 Internal AC Internal AC

OS6450-P24X 0 24 2 2 Internal AC Internal AC/DC

OS6450-P48 0 48 2 2 Internal AC Internal AC

OS6450-P48X 0 48 2 2 Internal AC Internal AC/DC

• All “X” models SFP+ ports operate at 10Gb/s by default.

• All “M” models have metro ethernet services enabled by default.

• All “P” models comply with both IEEE 802.3af/at standards.

• * All “L” user port speeds are upgradable to gigabit speeds with a license upgrade.

• ** Requires the OS6450-SW-PERF license to enable 10 G uplink capability.

CHASSIS 10/100/1000

SFP PORTS

10/100/1000 COMBO PORTS

SFP+ GIGABIT UPLINK SFP+ 10 GIGABIT UPLINK

10 GB/S SFP+ STACKING EXPANSION MODULE PORTS

PRIMARY POWER BACKUP POWER

Fiber models

OS6450-U24 22 2 2** 2 Internal AC Internal AC/DC

OS6450-U24S 22 2 2** 2 Internal AC Internal AC/DC

OS6450-U24X 22 2 2 2 Internal AC Internal AC/DC

OS6450-U24SXM 22 2 2 2 Internal AC Internal AC/DC

• Combo ports are individually conﬁgurable to be 10/100/1000Base-T or 100/1000Base-X based on SFP transceivers.

• SFP ports support 100/1000 Base-X SFP transceivers.

• All “X” models SFP+ ports operate at 10Gb/s by default.

• All “M” models have metro ethernet services enabled by default.

• “S” models only support 1588v2 Transparent Clock in non-stacking conﬁguration.

• ** Requires the OS6450-SW-PERF license to enable 10 G uplink capability.

Expansion port models

EXPANSION MODULE GIGABIT RJ45 PORTSSFP PORTS GIGABIT SFP PORTS 10 GB/S SFP+ ***

OS6450-XNI-U2 0 0 2

OS6450-GNI-U2 0 2 0

OS6450-GNI-C2 2 0 0

• Expansion modules are not 1588v2 capable.

• 1588v2 precision timing is disabled if expansion modules are installed.

• *** Only stacking mode supported

DETAILED PRODUCT FEATURES

Simpliﬁed management

• Conﬁguration management interfaces

¬ Intuitive CLI with a familiar interface,

reducing trainingcosts

¬ Easy-to-use, point-and-click web-based

element manager (WebView) with built-in help for easy conﬁguration

¬ Integration with OmniVista 2500 for

networkmanagement

¬ Full conﬁguration and reporting using

SNMPv1/2/3 across all OmniSwitch families to facilitate third-party NMSintegration

¬ Remote Telnet management or Secure

Shell access using SSHv2

Alcatel-Lucent Omniswitch 6450

ALCATEL-LUCENT ENTERPRISE DATA SHE ET

¬ File upload using USB, TFTP, FTP, SFTP,

or SCP for faster conﬁguration

¬ Human-readable ASCII-based

conﬁguration ﬁles for ofﬂine editing and bulk conﬁguration

¬ Managed by Alcatel-Lucent 5620

Service Aware Manager

• Monitoring and troubleshooting ¬ Local (on the Flash) and remote server

logging: Syslog and command log

¬ Port-based mirroring for

troubleshooting and lawful interception supports four sessions with multiple sources-to-one destination

¬ Policy-based mirroring that allows

selecting the type of trafﬁc to mirror using QoS policies

¬ Remote port mirroring that facilitates

passing mirrored trafﬁc through the network to a remotely connecteddevice

¬ Port monitoring feature that allows

capturing Ethernet packets to a ﬁle, or to an on-screen display to assist in troubleshooting

¬ sFlow v5 and RMON for advanced

monitoring and reporting capabilities for statistics, history, alarms,

andevents ¬ IP tools: Ping and trace route ¬ Digital Diagnostic Monitoring (DDM):

Real-time diagnostics of ﬁber

connections for early detection of

optical signal deterioration

+ 7 hidden pages