Page 1
Abrasive Supply Company, Inc.
Safety Data Sheet Polyblast Urea Blasting Media
Rev. Date: May 14, 2015
Page 1 of 6
1. Product and Company Identification
Trade Name: Polyblast Urea (Type 2)
Synonym: Urea Blasting Media, Thermoset Urea
Recommended Use: Primarily used for paint stripping and media blasting
Manufacturer: Abrasive Supply Company, Inc.
25240 State Route 172
Minerva, Ohio 44657
Phone: 330-894-2818
Fax: 330-894-2626
2. Hazards Identification
Granular material with no odor.
Spilled product may create a slipping hazard. Clean up any spills immediately.
Potential Health Effects:
Eye- Solids or dust may cause irritation or scratch the eye.
Skin- Material can be abrasive.
Ingestion-May be harmful if swallowed.
Inhalation- Potential respiratory irritation
No known chronic health effects.
Page 2
Abrasive Supply Company, Inc.
Safety Data Sheet Polyblast Urea Blasting Media
Rev. Date: May 14, 2015
Page 2 of 6
Carcinogenicity:
NTP-No
IARC Monographs- No
OSHA- No
HMIS NFPA
Health 2 2
Flammability 0 0
Reactivity 0 0
This product is not considered hazardous within the definition contained in the code of Federal
Regulations: 29 CFR 1915-2.
3. Composition/Information on Ingredients
Polymerized Urea Molding Compound > 97 ACGIH TLV None
CAS #9011-05-6 OSHA PEL None
Pigment and Additives < 2 ACGIH TLV None
OSHA PEL None
resiSTATᴿ
(Anti-static agent) < 1 ACGIH TLV None
CAS #002764-13-8 OSHA PEL None
Page 3
Abrasive Supply Company, Inc.
Safety Data Sheet Polyblast Urea Blasting Media
Rev. Date: May 14, 2015
Page 3 of 6
4. First Aid Measures
Inhalation- Remove person to fresh air. Perform CPR if breathing has stopped and seek
immediate medical attention.
Skin- Product may be abrasive. Wash thoroughly. Seek medical attention if irritation persists.
Eye- If particles get into eye, treat as any foreign object. Flush with water for 15 minutes.
Seek medical treatment for any serious eye injury.
Ingestion- Induce vomiting by giving two glasses of water. Seek medical attention.
No known medical conditions generally aggravated by exposure.
5. Fire Fighting Measures
Extinguishing Media-Foam, Dry Chemical, CO2, Water Fog, Steam
Hazardous Combustion Products- Carbon Monoxide, Nitrous Oxide
Fire Fighting Procedures- Wear a self-contained breathing apparatus with full face plate and full
protective coating.
Flash Point-N/A
Dust can form explosive mixture with air. Sealed containers can build up pressure if exposed to
extreme heat (fire).
Flammable Limits- N/A
LEL- NA
UEL-N/A
Page 4
Abrasive Supply Company, Inc.
Safety Data Sheet Polyblast Urea Blasting Media
Rev. Date: May 14, 2015
Page 4 of 6
6. Accidental Release Measures
Spilled product can cause a slipping hazard. Sweep up any spilled product immediately and
dispose of in appropriate container. Do not expose to flames, sparks, excessive temperatures,
and oxidizing agents.
7. Handling and Storage
Use in a well-ventilated area. Avoid contact with eyes.
Store in closed containers in a cool, dry area. Do not expose to open flames, excessive heat, or
oxidizing agents. Do not store in unmarked containers.
8. Exposure Controls/personal Protection
Occupational Exposure Limit Values- N/A
Biological Limit Values- N/A
Engineering Controls- Mechanical Ventilation and Local Exhaust. Use explosion proof electrical
equipment for extremely high dust levels.
Respiratory Protection- Use of a 8710 Dust and Mist respirator is recommended.
Skin Protection- Wear gloves during use. Wash hands thoroughly before eating, smoking, etc.
Eye Protection- Standard Safety Glasses with Side shields.
Page 5
Abrasive Supply Company, Inc.
Safety Data Sheet Polyblast Urea Blasting Media
Rev. Date: May 14, 2015
Page 5 of 6
9. Physical and Chemical Properties
Appearance – Granular colored particles.
Odor- Odorless
Melting Point-N/A
Boling Point- N/A
Evaporation Rate (Butyl Acetate=1)-N/A
Vapor Pressure (mm Hg)- N/A
Vapor Density (AIR=1)-N/A
Solubility in Water-0
Specific Gravity (H2O=1)-1.5
pH-4-8
10. Stability and Reactivity
Chemical Stability (Conditions to Avoid) – Ignition Sources, Excessive Heat
Incompatible materials- N/A
Hazardous Decomposition Products- Smoke, Carbon Monoxide, Carbon Dioxide
Hazardous Polymerization- Will not occur
Stability- Stable
11. Toxicological Information-
Very low order of acute toxicity.
Page 6
Abrasive Supply Company, Inc.
Safety Data Sheet Polyblast Urea Blasting Media
Rev. Date: May 14, 2015
Page 6 of 6
12. Ecological Information
Clean-up of product can be handled and disposed of safely according to all Federal, State,
and Local regulations.
13. Disposal Considerations
This product can be safely disposed of as normal solid waste according to Federal, State, and
Local regulations.
14. Transport Information
DOT- Not Regulated
NMF Classification- Class 55 1020
Marine Hazard- No
Special Transport Precautions- None
15. Regulatory Information
PPE for handling according to OSHAS Standard 29CFR 1910 Subpart 1.
16. Other Information
The information contained in this SDS was obtained from sources we believe are reliable. However, it is
provided without any representation or warranty, expressed or implied regarding accuracy or
correctness. The conditions or methods of handling, storage, use, and disposal of the product are
beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume
responsibility and expressly disclaim liability for loss, damage, or expense arising out of or in any way
connected with the handling, storage, use, or disposal of the product.
Loading...