Alarm Lock Precision 1100 User Manual
ADDENDUM
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1- 800-ALA-LOCK
For Technical Service 1-800-645-9440
Publicly traded on NASDAQ Symbol: NSSC
© ALARM LOCK 2006
PRECISION 1100 RECEPTACLE
REPOSITION THE
WI1580 10/06
For the Precision 1100 model to work correctly with the NAPCO Exit Trim models, the 1100 model receptacle must be
located at the bottom of the unit. If the 1100 model receptacle is located at the top position (either from pre-existing
installations or new installations), the receptacle must be repositioned as shown the image below.
Receptac le must
be repositioned
Receptacl e
repositioned
correctly
Precision 1100
INCORRECT CORRECT
HOW TO REPOSITION THE RECEPTACLE
Screw 1
Screw 2
Screw 4
Screw 3
1. The underside of the model 1100 is shown, with
four (4) screws that must be removed.
Receptacle
Precision 1100
2. Remove all 4 screws with a slotted screwdriver. Place screws aside.
Receptac le
3. With screws removed, the back plate can easily be
removed as a modular unit.
4. Turn back plate 180° so that the receptacle is
in the bottom position.
removed in step 2.
6. Receptacle repositioned correctly. 5. Replace all 4 screws that were previously
Loading...