Alarm Lock New KEY LOGGING Instruction

345 Bayview Avenue

Amityville, New York 11701

For Sales and Repairs 1- 800-ALA-LOCK

For Technical Service 1-800-645-9440

Publicly traded on NASDAQ Symbol: NSSC

ADDENDUM

NEW KEY LOGGING FEATURE

WI1587 1/07

The new Key Logging feature creates an entry in the Audit Log when a conventional key is used for entry. Two sample log entries are shown below, one printed, the other as displayed in DL-Windows. To enable Key Logging, simply connect the wires as shown in the images at the bottom.

------- AUDIT LOG ------- 01/16/07 13:06:35 Tue 13:01:59 001 PROGRAM 56 13:01:29 001 PROGRAM 57 13:00:53 001 ENTRY 13:00:26 013 ENTRY 13:00:17 KEY ENTRY 13:00:03 012 ENTRY 12:56:27 001 PROGRAM 2 12:56:27 001 PROGRAM 40 12:56:04 001 PROGRAM 39 12:55:00 NEW CLCK TIME 12:01:39 OLD CLCK TIME 12:00:45 RAM TEST:PASS 12:00:45 POWER UP

------------------------End of Audit Log

Sample log entry printed by the AL-

IR1 infrared printer.

HOW TO ROUTE AND CONNECT THE WIRES

Hold-down

clamp

Be sure two wires

are side-by-side

Black/

black wires

Red/ black wires

and do not overlap

Sample log entry as displayed by

DL-Windows (v3.6.0 or later).

Red/Black

Black/Black

1. Route wires through door as shown. The cylinder housing has two terminal housings, and each housing contains two wires -- one housing contains red/black wires, the other black/black.

2. After installing the inside housing, be certain wires are not pinched between the housing and the mounting plate.

3. Plug in each pair of connectors. Verify that the wire colors in each pair of female and male terminal housings are the same -- red/black to red/black black/black to black/black

and