Alarm Lock Lever Connector Replacement Kit User Manual
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1- 800-ALA-LOCK
For Technical Service 1-800-645-9440
Publicly traded on NASDAQ Symbol: NSSC
© ALARM LOCK 2005
ADDENDUM
LEVER CONNECTOR REPLACEMENT KIT
Use this replacement kit with only those cylindrical locks that meet all three of the following requirements:
• Locks manufactured before August 20, 2005;
• Locks that contain a Plastic Ring (HW573--see exploded diagram below);
• Locks that exhibit a lever binding problem when installed on doors under 1 3/4" in thickness.
WI1454 8/05
Screws (2)
Spring Cover Plate (HW565)
Lever Handle
Spring (HW1220)
APPLICABLE MODELS
DL2700
DL3000
PDL3000
Connector
Plate (HW570)
Lever Connector
Old (HW572D)
New (HW572E)
(To be removed)
Plastic Ring
(HW573)
Outside Housing
DL4100
PDL4100
DL2800
HOW TO REPLACE THE LEVER CONNECTOR (NEW PART HW572E)
Spring Cover
Plate
Lever Handle Spring
Connector Plate
Lever Connector
1. With housing removed from door,
unscrew two screws and remove
the Spring Cover Plate (HW565) as
shown.
Plastic Ring
(HW573)
5. Remove and discard Plastic Ring
(HW573).
2. Remove the Lever Handle
Spring (HW1220) and set aside.
Connector Plate
(HW570)
Replace Lever Connector
(HW572D)
6. Install new clear plating Lever
Connector (HW572E) in place of
old Connector (HW572D). Reinstall Connector Plate (HW570).
3. Remove Connector Plate (HW570).
Lever Handle S pring
(HW1220)
7. Install Lever Handle Spring
(HW1220).
4. Remove Lever Connector (HW572D)
and discard.
8. Replace the Spring Cover Plate
(HW565) and secure with two screws.
Loading...