Alarm Lock DL-WIN INSTALLATION INSTRUCTIONS
ADDENDUM TO THE
DL-WINDOWS v3.5.3
R
SOFTWARE INSTALLATION
INSTRUCTIONS
Due to recent changes in the Microsoft Installation Installer, update previous versions of DL-Windows to version 3.5.3 as follows:
A. INSTALL DL-WINDOWS v3.5.3
1. Insert the DL-Windows 3.5.3 installation disk into your CD-ROM
drive. Follow the Installation Wizard instructions; when installation
is complete, do NOT remove the installation disk from the drive.
2. Double-click the DL-Windows desktop icon while the DL-Windows
disk is in the drive. The installation software will take the extra
steps necessary to fully update the previous version of DLWindows to version 3.5.3.
3. At the end of the installation, DL-Windows will run.
4. If XP Styles are enabled, a "Please Turn Off XP Styles" popup message will appear. Click Yes for instructions to turn off XP Styles.
5. A DL-Windows Log In screen opens. Press Enter.
Note: Pre-existing Accounts will not be loaded; therefore exit DL-
Windows and run the Import Utility as described below.
B. RUN THE IMPORT UTILITY
1. Click Start, Programs, DL-Windows, Import Utility.
2. Click OK to the Welcome to DL-Windows Import Utility... popup.
3. Click Open. The Locate your AL3000/AcctList File dialog
opens.
4. Click the Files of Type drop down list, select Old DL-Windows
Index.
5. Click the file AL3000.MDB.
6. Click Open.
7. Click Update.
8. Click Yes to confirm the update.
9. Click OK to the Import Utility message.
10.Click OK to the Update Successful message. You can now close
the Import Utility and run the DL-Windows software program.
© NAPCO 2005 WI1462 9/05
333 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs, (800) 645-9445
For Technical Service, (800) 645-9440
Publicly traded on NASDAQ Symbol: NSSC
Loading...