Alarm Lock DK3000, PDK3000 Installation Instructions

DK3000 and PDK3000 - Installation Instructions

WALL INSTALLATION

1. Use Mounting Plate as a
template to trace and drill
four 7/32" diameter holes
for wall anchors and 1"
hole for wires.

2. Pull all existing
wires through
wall and Mount­ing Plate.

3. Position Mounting Plate and
fasten with four wall anchor
screws. Connect wires as
necessary using wire nuts
supplied. Push wires inside.

Lip

Mounting Plate

4. Position unit so that the
Short Plate can be placed
over the lip on the Mount­ing Plate.

Short
Plate

5. Press unit flush with
Mounting Plate and pull
down. Fasten with screw.

Lip

DK3000 Remote
Access Controller

PDK3000 Remote
Access Controller
with PROX

©

Screw tab

GANG BOX INSTALLATION

A. Pull all existing wires

through wall Gang
Box and Mounting
Plate.

TECH SUPPORT: 1-800-ALA-LOCK

ALARM LOCK SYSTEMS, INC.

345 Bayview Avenue, Amityville, New York 11701 [phone] 1-800-252-5625 Fax: [phone]

is a division of the

B. Position Mounting

Plate and fasten with
two flathead screws

NAPCO Security Group

Screw
tab must
be inside

Part No. WI 1130A 5/03