Alarm Controls MCK-6-3, MCK-5-4, MCK-1, MCK-6, MCK-6-5 Installation Instructions

Cam Stop

Remove Cam Stop when installing

second switch

Switch

Cam

Threaded Ring

Install second switch in this location

The Mortise Cylinder Keyswitch Station has been designed to accommodate all standard Mortise cylinders

from 1 1/8” to 1 1/4” in length. A spacer is required when used with 1 1/4” cylinder.

Mechanical Assembly

1. Insert the mortise cylinder thru the hole in the front plate.

2. Position the switch bracket over the mortise cylinder and fasten with the threaded ring.

3. Dress switch leads away from cam and switch actuator to insure proper operation.

4. Remove cam stop when installing second switch.

REAR VIEW OF SWITCH BRACKET

ASSEMBLY AND WIRING INSTRUCTIONS

MORTISE CYLINDER KEYSWITCH STATIONS

Alarm Controls

19 Brandywine Drive

Deer Park, New York 11729

[phone]

www.alarmcontrols.com

Switch Wiring

Normally-Open Contact -------- Blue Lead

Common Contact ---------------- White Lead

Normally-Closed Contact ------ Red Lead

LED Wiring (Applicable Models)

+12 to 24V AC or DC ----------- Red Lead

Return ------------------------------- Black Lead

Pneumatic Switch Wiring

Normally-Open Contacts ------ Blue Leads

Normally-Closed Contacts ---- Red Leads

Time adjustment knob