Alarm Controls KP-200 Specsheet
Models
KP-200
Flush Mount Weather-proof Digital
Keypad
Model KP-200
Vandal-Resistant and
Weather-Proof Flush Mount
Digital Keypad
Specifications
• One programmable SPDT 5A
relay output, one transistor
output
• Operates on 12 or 24 VAC or
VDC, auto voltage sensing
• Output 1: 100 multi-user codes,
code length from 4 to 8 digits
• Output 2: 10 multi-user codes,
code length from 4 to 8 digits
• Output 1 Inhibit prevents Output
1 and Egress Button from
operating
• Output 1 contact rating: SPDT
5A at 28 VDC/120 VAC
• Output 2 NPN open collector:
100 mA sink at 24 VDC
maximum
• Active current draw: 100 mA at
12V, 120 mA at 24V
• Idle current: 10 mA max at 12V,
22 mA max at 24V
• Tamper switch contacts: N/C dry
contacts, 50 mA maximum
• Operating temperature: -4F to
158F, (-20C to +70C)
• Ambient humidity: 5 to 95%
relative humidity
• Egress input: normally-open
contacts
• Interlock Control Output is used
to control a second keypad in an
interlock system to prevent both
doors from opening at the same
time.
• Conforms to IP66 Code
Features
• Designed for access control
applications
• Built-in tamper switch, built-in
buzzer
• Heavy die cast flush mount
housing with brushed 302
stainless steel faceplate
• Waterproof and dustproof
• Red, yellow and green LEDs
indicate the condition of the
keypad
• Request to exit input with relay
timer from 1 to 999 seconds
• Fully programmable from the
keypad
• 100 user codes with code
lengths from 4 to 8 digits
• One programmable NPN
transistor output
• Keypad lockout feature: After 10
false code entries, keypad locks
for 30 seconds
• Flush mounts on standard
single gang electrical box
• Die cast metal keys with audible
and visual key press
• Metal keys are backlit for
visibility in dark areas,
backlighting is adjustable
• Keypad beeper can be silenced
if desired
• Keypad can be programmed for
output annunciation
• Relay can be set for momentary
or latching mode
• N/C tamper switch can provide a
remote alarm signal
• Door sensor input connected to
a n/c magnetic contact mounted
on the door will provide the
following functions:
• Door auto relock to prevent
"tailgating"
• Door forced open alarm
• Door propped open alarm
• Door interlock, (mantrap),
requires 2 keypads
• Key active output switches to
ground for 10 seconds when a
key is pressed. Can be used for
a remote LED, buzzer or relay.
• Limited lifetime warranty
CONTROLS
© 2017 Hanchett Entry Systems, Inc., an ASSA ABLOY Group Company
alarmcontrols.com • 800.645.5538
Loading...