Alarm Controls AES-100 Installation Instructions

AES-100

Electric Strike
Installation Instructions
and Technical Support
UL 1034 . Grade 1

DIMENSIONS

Alarm Controls
19 Brandywine Drive
Deer Park, NY 11729

800.645.5538
www.alarmcontrols.com

[15.75]

4-7/8"

[123.83]

5/8"

4-1/8"

[104.78]

4-7/8"

[123.83]

5/8"

[15.75]

4-1/8"

[104.78]

1-3/4"
[44.75]

3-3/8"
[85.73]

3/4"

[18.90]

1-1/4"
[31.50]

1-1/4"
[31.50]

3-3/8"
[85.73]

3/4"

[18.90]

9/32"

[7.0]

1-27/32"

[47.0]

1-1/2"

[38.0]

1/8"
[3.0]

4-7/8"

[123.83]

5/8"

[15.75]

[104.78]

4-1/8"

[28.20]

3-27/32"

[97.70]

1-1/4"
[31.50]

3-3/8"
[85.73]

3/4"

[18.90]

1-1/8"

1-1/2"
[38.10]

7-15/16"
[201.61]

13/16"
[20.50]

5/8"

[15.75]

7-7/16"

[189.0]

3-3/8"
[85.20]

2-9/32"

[57.90]

7/8"

[22.0]

11/32"

[8.50]

1-1/4"
[31.50]

11/16"
[17.50]

1-5/32"

[29.0]

4-7/8“

SQUARE CORNER

FACE PLATE

Note: Drawings are not to scale. All dimensions are in inch and mm. This information is subject to change without notice.

4-7/8“

ROUND CORNER

FACE PLATE

7-15/16“

ROUND CORNER

FACE PLATE

Page 1

INSTALLATION INSTRUCTIONS

1. Prepare door jamb per appropriate template detail.

2. Install mounting tabs using #10-32 screws. Do not
tighten. Set tabs for 1/8” thick face plate.

3. Connect wires coming from the low voltage power
source (see wiring diagrams and electrical specifications
on page 3).

4. NOTE: It is important to allow enough space behind the
electric strike in the jamb cut-out for the wires.
Bunching the wires inside the electric strike body may
cause the unit to not operate properly.

5. Install electric strike and option face plate to jamb
using #12–24 machine screws or wood screws provided

in the option package.

6. Secure #10-32 screws holding mounting tabs (when
applicable).

Cutout dimensions for 4-7/8“ Faceplate.

Note: 1020 has radius corners.

R5/32"
for 4-7/8“ RD.Faceplate

FIG. 1: DOOR JAMB DESCRIPTION

2-1/4
[57.15]

[28.57]

1-1/8

CYLINDRICAL

LOCKSET

1-1/4
[31.8]
1-3/4

[44.45]

Door

VERTICAL

CENTERLINE

12-24 TAP

STRIKE

LOCK

4-7/8

[123.83]

[19.05]

3-3/8

[85.73]

3/4

STRIKE

PLATE

1-1/4
[31.8]

Door Jamb

FIG. 3: JAMB INSTALLATIONFIG. 2: JAMB INSTALLATION

Cutout dimensions for 7-15/16“ Faceplate.

[15.88]

3/8

[9.53]

3-1/2
[88.9]

4-1/8

[104.77]

5/8

7/8"

[22.23]

3-3/8"

[85.73]

1-1/4"
[31.75]

#12-24 Thread

3-1/2"
[88.89]

4-1/8"

[104.77]

4-7/8"

[123.83]

Page 2

R5/32"

[3.97]

3-3/8"
[85.73]

7/8"

[22.23]

1-3/8"

[34.93]

7-7/16"
[188.98]

7-15/16"

[201.61]