Alarm Controls 1200EX, 1200EXZ, 600EX, 600EXZ Specsheet
Hazardous Location Solutions
MAGNETIC LOCKS AND PUSH BUTTONS
MODELS 600EX/600EXZ
& 1200EX/1200EXZ
FE ATU RES
• Instant release circuit – no residual magnetism
• Surface mounts easily with minimum of tools
• Fully sealed electronics using epoxy seal and conduit
port for wiring to prevent electrical arcing
• Non-aluminium parts are plated to resist corrosion
• Low projection from header accommodates most
door conditions without the need for filler plates or
spread brackets
• Integrated Door Position Switch – standard
• Built-in spike or surge suppression
• Three-year limited warranty
APP LICATIONS
• Ideal for areas where there are explosive liquids, gases
or dust present that could become airborne in the case
of an accident
• Single door application (use two for double doors)
SPECIFICATIONS
• UL & ULC Approved for Hazardous Locations
• Conforms to Class I, Division II | Group A, B, C, D
• Operating Temperature: Up to +104°F [+40°C]
HOLDING FORCE
• 600EX / 600EXZ - 500lbs holding force [227kg]
• 1200EX / 1200EXZ - 1,000lbs holding force [454kg]
ELECTRICAL
• 250 mA at 24 VDC continuous duty
• SPDT, 100 mA at 30 VDC max (Door Status Sensor)
FINISH
• US28 / 628 - Satin Aluminum Clear (Standard)
MODEL Description
600EX Outswing door, push side mount with conduit on side-block
600EXZ Inswing door, pull side mount with conduit on top, includes Z bracket for top jamb
1200EX Outswing door, push side mount with conduit on side-block
1200EXZ Inswing door, pull side mount with conduit on top, includes Z bracket for top jamb
This document is for a product not in full production. As such, all specifications and regulatory listings are subject
to change. Please refer to www.AlarmControls.com for the most up to date information on new product launches.
CONTROLS
© 2018 Hanchett Entry Systems, Inc., an ASSA ABLOY Group Company
alarmcontrols.com • 800.645.5538
Hazardous Location Solutions
MAGNETIC LOCKS AND PUSH BUTTONS
MODELS EXP-1/EXP-15
& EXP-2/EXP-25
FE AT U R E S
• Factory sealed enclosures to prevent arcing causing
ignition of hazardous atmosphere
• Heavy Cast NEMA 7 Enclosure
• 2” diameter aluminum push button silkscreened with
black epoxy ink
• Non-aluminium parts are plated to resist corrosion
• UL Listed
• Lifetime limited warranty
APP LICATIONS
• Ideal for areas where there are explosive liquids, gases
or dust present that could become airborne in the case
of an accident.
SPECIFICATIONS
• UL & CSA Approved for Hazardous Locations
• Conforms to Class I, Division I/II | Group B, C and D
• Conforms to Class I, Division I/II | Group E, F and G
• Operating temp -13°F to 158°F [-25°C to 70°C]
ELECTRICAL
• One Normally Open and One Normally Closed Contact
• Contact rated
FINISH
• Aluminum Clear with Silkscreened Black Epoxy Ink
• Custom options available by request
MODEL Description
EXP-1 Momentary action switch, "PUSH TO EXIT"
EXP-15 Momentary action switch, "PANIC"
EXP-2 Latching action switch, "PUSH TO EXIT"
EXP-25 Latching action switch, "PANIC"
AC-013-0418
CONTROLS
© 2018 Hanchett Entry Systems, Inc., an ASSA ABLOY Group Company
alarmcontrols.com • 800.645.5538
Loading...