Alamo ST10, ST15 User Manual

ST15 & ST10 Stingray

ARCHIVE BOOK

15 ' Flex Wing - 4 Gearbox Model

S/N ST15-C31200557203 (Jan. 2002 )

S/N ST15-Current

COMPLETE PARTS

LISTING

ALAMO INDUSTRIAL

1502 E. Walnut Seguin, Texas 78155 830-372-3551

Archive Book

Part No.

02980337

2004 Edition Rev 01-09

Alamo Industrial (Terrain King)

15 foot Flex Wing Mowers

Model - 3 Gearbox 15 ft. / Flex Wing Mowers

Production Date

Start.........to.... End Start s/n...............to..... End s/n

530................ May 1968.......... Nov. 1973* TK530-07195..................TK530-21446*

CP180........... Dec. 1973......... Mar. 1976

X-3................ Apr. 1975.......... Apr. 1978

TK15.............May 1978.......... Sep. 1982

TK15HD........Oct. 1982..........May 1987

A315..............Mar. 1990..........Sep. 1990

* End of Production for this Model

* CP180-31188................. CP180-34724*

* X-3-33388.......................X-3-36782*

* TK15-36783....................TK15-39979*

* TK15HD-39980...............TK15HD-46051*

* A315-01001.................... A315-10080*

Serial Number

Model - 4 Gearbox 15 ft. Flex Wing Mowers

Production Date

Start.........to.... End Start s/n...............to..... End s/n

Serial Number

TK15-IV........ Mar. 1985..........May. 1987* TK15-IV-42840............... TK15-IV-46051*

AG15-IV........ Jun. 1987..........Mar. 2002

A415..............Jun. 1990.......... Dec. 2002

ST15.............Jan 2002........... Current ST15-C31200557203..... ST15-Current

* End of Production for this Model

* AG15-IV-01001............... AG15-IV-04643*

* A415-01001.................... A415-14000*

Archive Manual Part Numbers

TK530........................ 02980262 TK15-IV.........................00761652

CP180........................ 02980263 AG15-IV........................ 00761652

X-3.............................. 02980264 A315.............................. 02980317

TK15.......................... 02980265 A415.............................. 02980316

TK 15HD.....................02980265 ST15.............................. 02980337

INDEX - ST15 & ST10

ITEM PAGE NO.

AXLE ASY.

Center Axle:

ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 26

Wing Axle

ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 18, 19

BLADE CARRIERS & BLADES:

ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 48, 49, 50

CHAIN GUARDS:

Front:

ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 64 thru 69

Rear:

ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 64 thru 69

COUNTER WEIGHT: (10 foot Model)

ST15-C31300557203 (Jan. 2002) to ST15-Current.................................... 20

CONTROL / LEVEL LIFT ROD:

ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 27

DECK COMPONENT:

Center Section:

ST15-C31200557203 (Jan. 2002) to ST15-C31200789311 (Oct. 2003).... 14, 15

ST15-C31200790311 (Nov. 2003) to ST15-Current....................................16, 17

Wing Section:

ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 18, 19

Skirt Assembly ST10:

ST15-C31300557203 (Jan. 2002) to ST15-Current.................................... 20, 21

DRIVELINE ASY:

PTO, Cat 5 C/V:

ST15-C31200557203 (Jan. 2002) to ST15-Current................................... 32, 33

INTERMEDIATE:

ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 35

WING:

ST15-C31200557203 (Jan. 2002) to ST15-Currentt................................... 34

SLIP CLUTCH:

Intermediate Driveline & Wing Driveleine:

ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 36, 37

GEARBOX ASY:

Divider:

ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 38, 39

Center:

ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 40, 41

Right & Right Wing:

ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 42 thru 45

ST15 (Archive Book) 01/04

Index - 3

INDEX - ST15 & ST10

ITEM PAGE NO.

GEARBOX SHIELDS

ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 46, 47

HITCH ASY (OPTIONAL PRECISION HITCH)

ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 24

HYDRAULICS

Schematic - Axle Lift Cylinders

ST15-C31200557203 (Jan. 2002) to ST15-C31200789311 (Oct. 2003)..... 52, 53

ST15-C31200790311 (Nov. 2003) to ST15-Current.....................................54, 55

Schematic - Wing Lift & Fold Cylinders

ST15-C31200557203 (Jan. 2002) to ST15-C31200789311 (Oct. 2003)..... 58

ST15-C31200790311 (Nov. 2003) to ST15-Current.....................................59

Schematic - Control Valve:

ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 62

Wing Lift Cyl:

ST15-C31200557203 (Jan. 2002) to ST15-C31200789311 (Oct. 2003)..... 60

ST15-C31200790311 (Nov. 2003) to ST15-Current.....................................61

Axle Lift Cyl:

ST15-C31200557203 (Jan. 2002) to ST15-C31200789311 (Oct. 2003)..... 56

ST15-C31200790311 (Nov. 2003) to ST15-Current.....................................57

Attachments:

Axle Lift:

ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 18, 63

Wing Lift:

ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 18, 63

Valve Mnt:

ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 62

INDEX / INTRODUCTION

Index ............................................................................................................ 3 thru 5

Introduction................................................................................................... 6 & 13

PARKING JACK

ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 25

SAFETY CHAIN

Safety Chain................................................................................................. 70

SAFETY SECTION

Safety Section...............................................................................................7 thru 12

SKID SHOES

ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 16 thru 20

TONGUE:

Tongue:

ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 22, 23

Precision Hitch: (Optional)

ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 24

ST15 (Archive Book) 01/04

Index - 4

INDEX - ST15 & ST10

ITEM PAGE NO.

TIRE, WHEEL & HUBS

ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 28 thru 31

TRANSPORT LIGHT ASY:

ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 71

WINCH & STAND

ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 51

WHEEL HUB

ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 28 thru 31

Serial Number Identification Codes

ST15 (C312) & ST10 (C313)

12 Digit Serial Number Break Down

1 st. thru 4 th. digits designate model (C312 = ST15 and C313 = ST10)

5 th. digit designates decade years (example 0=2000 thru 2009 or 1=2010 thru 2019 or 2=2020 thru 2029 & etc.)

6 th. thru 9 th. digit means it was the 557 th unit built that year

10 th. digit is year of the decade (example 2=2002 or 3=2003 & etc.)

11th. thru 12 th. digit is month of the year (example 03=March or 04=April & etc.)

Summary: This serial number means, C312 = ST15, 0 = 1 st. decade of century,

0557 = Five hundred and fifty seventh unit built this year, 2 = the year of the decade

(2002),

03 = the month of the year (March)

ST15 (Archive Book) 01/04

Index - 5

ST15 & ST10

ARCHIVE BOOK

INTRODUCTION

The ST15 / ST10 Archive Book is a complete listing of Parts from the first Unit to the Present. The Production Dates, Serial Numbers, Special Notes and Descriptions are furnished to help find Replacement Parts. Dimension (if listed) are for Identification of Parts and MAY NOT be to Manufacturing Specification, Your measurements may vary some from dimensions listed. Some Parts may be changed and be different than parts listed. Some Modification may be required when replacing older parts. Match S/N's listed in this Book with the S/N's listed at the top of each Parts Page. See Index page for serial number code break down. The ST15 S/N will start with prefix C312 and ST10 prefix is C313, the first 4 digits of the 12 digit S/N designates the model.

PAGE EXAMPLE

Beginning Production Date

Dec. 2002

Current

Ending Production Date Componets Listed This Page

For ordering parts the following instructions are offered to help eliminate delay

1. The purchase order must include the Name, Address (Ship to Street Address) of the Person / Organization ordering the parts. Who / How Parts should be Billed. Name and Phone Number of a Contact Person at your end.

2. The Purchase Order must list clearly the correct Part Number of Part. Quantity of each Part wanted, Complete and correct Description of each Part. All Parts will be shipped as requested depending on availability and/or reasonability of request carrier / method.

3. Alamo Industrial reserves the right to substitute parts where applicable and change prices Without prior notice. Alamo Industrial also reserves the right to Ship Parts the most Reasonable way as determined by Alamo Industrial.

4. Some Parts are unlisted items, which are special production items not normally stocked or built for a limited / special use, These parts may be subject to special handling or cannot be priced till ordered. Always Request a quotation for such Parts before sending a purchase order.

FRAME

ASSEMBLY

Beginning S/N

S/N ST15-C31200557203

S/N ST15-Current

Ending S/N

ST15 (Archive Book) 01/04

Index - 6

SAFETY

SECTION

Safety Section - 7

SAFETY

Read these assembly instructions through completely and understand them before proceeding with the assembly of the equipement.

A safe and careful operator is the best operator. Safety is of primary importance to the manufacturer and should be to the owner/operator. Most accidents can be avoided by being aware of your equipment, your surroundings, and observing certain precautions. The first section of this manual includes a list of Safety Messages that, if followed, will help protect the operator and bystanders from injury or death. Read and understand these Safety Messages before assembling, operating or servicing this Implement. This equipment should only be operated by those persons who have read the Manual, who are responsible and trained, and who know how to do

so safely and responsibly.

The Safety Alert Symbol combined with a Signal Word, as seen below, is used throughout this manual and on decals which are attached to the equipment. The Safety Alert Symbol means: “ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!” The Symbol and Signal Word are intended to warn the owner/operator of impending hazards and the degree of possible injury faced when operating this equipment..

Practice all usual and customary safe working precautions and above all---remember safety is up to YOU. Only YOU can prevent serious injury or death from unsafe practices.

CAUTION! The lowest level of Safety Message; warns of possible injury. Decals

located on the Equipment with this Signal Word are Black and Yellow.

WARNING! Serious injury or possible death! Decals are Black and Orange.

DANGER! Imminent death/critical injury. Decals are Red and White. (SG-1)

Safety Section - 8

SAFETY

PELIGRO!

Si no lee Ingles, pida ayuda a alguien que si lo lea para que le traduzca las medidas de seguridad. (SG-3)

READ, UNDERSTAND, and FOLLOW the following Safety

Messages. Serious injury or death may occur unless care is taken to follow the warnings and instructions stated in the Safety Messages. Always use good common sense to avoid hazards.

(SG-2)

PELIGRO!

Si no lee Ingles, pida ayuda a alguien que si lo lea para que le traduzca las medidas de seguridad. (SG-3)

INSTRUCTIVO!

!LEA EL INSTRUCTIVO!

LEA EL

WARNING!

DANGER!

WARNING!

Perform service, repairs and lubrication according to the maintenance section. Ensure the unit is properly lubricated as specified in the lubrication schedule and all bolts and nuts are properly torqued. Failure to properly service, repair and maintain this Implement in good operating condition could cause component failure and possible serious injury or even death. (SG-35)

Operate this Equipment only with a Tractor equipped with an approved roll-over-protective system (ROPS). Always wear seat belts. Serious injury or even death could result from falling off the tractor--particularly during a turnover when the operator could be pinned under the ROPS. (SG-7)

Never work under the Implement, the framework, or any lifted component unless the Implement is securely supported or blocked up to prevent sudden or inadvertent falling which could cause serious injury or even death. (SG-14)

Use caution and wear protective gloves when handling sharp objects such as blades, knives, and other cutting edges. Be alert to worn component surfaces which have sharp edges. Sharp surfaces can inflict severe laceration injuries if proper hand protection is not worn. (SG-37)

Safety Section - 9

SAFETY

WARNING!

Many of the parts are heavy and require lifting assistance. Do not try to lift the heavy parts by yourself. Get help from another employee or from an overhead crane.

The operator and all support personnel should wear hard hats, safety shoes, safety glasses, and proper hearing protection at all times for protection from injury including injury from items thrown by the equipment. (SG-16)

Always wear safety shoes with steel toes when working on this equipment. It is recommended that the safety shoes have metatarsal guards.

WARNING!

DANGER! Always disconnect the wire leads from the mower valve solenoid before

DANGER!

When welding use Welding hood with the appropriate OSHA required protective lens, welding apron, and welding gloves.

performing service on the Tractor or Mower. Use caution when working on the Tractor or Mower. Tractor engine must be stopped before working on Mower or Tractor. The Mower Blades could inadvertently be turned on without warning and cause immediate dismemberment, injury or death. (SBM-12)

Never run the tractor engine in a closed building or without adequate ventilation. The exhaust fumes can be hazardous to your health.

(SG-23)

Safety Section - 10

SAFETY

DANGER!

WARNING!

DANGER!

Before starting the mower make sure the area is clear and the floor has been swept. The mower blade can throw objects several hundred feet. Thrown objects could damge property or cause severe bodily injuries even death.

Make certain that the “Slow Moving Vehicle” (SMV) sign is installed in such a way as to be clearly visible and legible. When transporting the Equipment use the Tractor flashing warning lights and follow all local traffic regulations. (SG-6)

Start tractor only when properly seated in the Tractor seat. Starting a tractor in gear can result in injury or death. Read the Tractor operators manual for proper starting instructions. (SG-13)

DANGER!

WARNING!

DANGER! All Safety Shields, Guards and Safety devices including

Do not operate this Equipment with hydraulic oil leaking. Oil is expensive and its presence could present a hazard. Do not check for leaks with your hand! Use a piece of heavy paper or cardboard. Highpressure oil streams from breaks in the line could penetrate the skin and cause tissue damage including gangrene. If oil does penetrate the skin, have the injury treated immediately by a physician knowledgeable and skilled in this procedure. (SG-15)

Always read carefully and comply fully with the manufacturers instructions when handling oil, solvents, cleansers, and any other chemical agent. (SG-22)

(but not limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox Shields, PTO integral shields , and Retractable Door Shields should be used and maintained in good working condition. All safety devices should be inspected carefully at least daily for missing or broken components. Missing, broken, or worn items must be replaced at once to reduce the possibility of injury or death from thrown objects, entanglement, or blade contact. (SGM-3)

Safety Section - 11

SAFETY

DANGER!

DANGER! Operate the Tractor and/or Implement controls only while properly seated

WARNING!

NEVER use drugs or alcohol immediately before or while operating the

Tractor and Implement. Drugs and alcohol will affect an operator’s alertness and coordination and therefore affect the operator’s ability to operate the equipment safely. Before operating the Tractor or Implement, an operator on prescription or over-the-counter medication must consult a medical professional regarding any side effects of the medication that would hinder their ability to operate the Equipment safely. NEVER knowingly allow anyone to operate this equipment when their alertness or coordination is impaired. Serious injury or death to the operator or others could result if the operator is under the influence of drugs or alcohol. (SG-27)

in the Tractor seat with the seat belt securely fastened around you. Inadvertent movement of the Tractor or Implement may cause serious injury or death. (SG-29)

Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. (SG-30)

WARNING!

Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. Wash Hands after handling. (SG-31)

Use extreme caution when getting onto the Implement to perform repairs, maintenance and when removing accumulated material. Only stand on solid flat surfaces to ensure good footing. Use a ladder or raised stand to access high spots which cannot be reached from gound level. Slipping and falling can cause serious injury or death. (SG-33)

Avoid contact with hot surfaces including hydraulic oil tanks, pumps, motors, valves and hose connections. Relieve hydraulic pressure before performing maintenance or repairs. Use gloves and eye protection when servicing hot components. Contact with a hot surface or fluid can cause serious injury from burns or scalding. (SG-34)

Avoid contact with hot surfaces of the engine or muffler. Use gloves and eye protection when servicing hot components. Contact with a hot surface or fluid can cause serious injury from burns or scalding. (SG-38)

Safety Section - 12

ST15 / ST10

Flex Wing Rotary

ARCHIVE BOOK

ST15 Archive Book

This is a complete listing of Parts from the first Unit to the Present (or end of model production). The Production Dates, Serial Numbers, Special Notes and Descriptions are furnished to help find Replacement Parts. Dimension (if listed) are for Identification of Parts and MAY NOT be to Manufacturing Specification, Your measurements may vary some from dimensions listed. Some Parts may be changed and be different than parts listed. Some Modification may be required when replacing older parts. Match S/N' and Ship Dates if available.

ID The ST15 (Jan 2002 to Current)

The ST10 & ST15 was built from Jan. 2002 (s/n Current) .

Serial Numbers:

See The Index Pages for an explanation on of how to identify your unit by the 12 digit serial number code, The Serial number code shows manufacturing production date of your unit.

Gearboxes:

The best way to ID the ST10 & ST15 (Stingray Model) is by the Gearboxes, This is a 4 Gearbox Model (Divider and Center Blade Gearbox two separate gearboxes). The Divider gearbox has a 1-3/ 8" X 21 Spline Output Shafts. The Blade Gearbox (Center & Wings) has a long section of the Housing that protrudes below where it bolts to the deck. The Blade Gearbox has a Dip-Stick type top Plug. The Blade Carrier Retaining Nut used a Cone Shaped Washer which no other model has to this time.

Blade Carriers:

The Blade Carriers are a Round Shaped Pan Weldment. The Blade Bolts are a Shouldered Blade Bolt, and a bushing is used with the Blade Bolt. This was not the only 4 gearbox model that had a Shoulder Blade Bolt but is the only model to use a bushing with the Shoulder Bolt.

Driveline Options:

There were no Driveline size options, There was a Cat IV (4) Wing Drivelines and a Cat V (5) PTO Driveline used on this model. Some parts will not interchange between drivelines. See Part numbers for interchangeable parts.

ST15-C31200557203) to Current (s/nST-

Axles:

The axles are Independent from center to wings. The type Hydraulic Axle lift is a Phasing (Slave) Cylinder system, the Hydraulic lift of the mower is done by using 3 hydraulic Cylinders mounted one in the center and one on each wing. The Cylinders are connected together into one Hydraulic flow in series.

ST15 (Archive Book) 01/04

Jan. 2002

Oct. 2003

37,38,39

DECK COMPONENTS

Center Section

ST15 / ST10

32,33

ST15-C31200557203

ST15-C31200789311

9,21,22

20,23

23,36

21,24,25,

26,40,41

3,4,31

2,5,6

34,35

10,11,12,13,14,15,

10,12,13,14,15,16

ST15 (Archive Book) 01/04

4,7,8

28,29,30

2,4,5,6

Jan. 2002

Oct. 2003

DECK COMPONENTS

Center Section

ST15-C31200557203

ST15-C31200789311

ST15 / ST10

Item Part No. Qty. Description

1 02978500 1 Center Section Asy 2 02978501 2 Hose Organizer 3 00755082 6 Bolt 4 000944 16 Lock Nut 5 00008300 2 Bolt 6 15B1200 2 Flat Washer 7 02978502 2 Skid Mount Asy 8 02975147 4 Bolt 9 02978503 2 Wing Lift Spacer Plate 10 02891800 2 Bolt 11 02978504 1 Retainer Pin, Long Center Pin 12 15B800 3 Flat Washer 13 00001800 3 Lock Nut 14 15B1600 3 Flat Washer 15 01408S 3 Roll Pin 16 02978505 2 Retainer Pin, Outer Pins 17 02959332 2 Bolt 18 02978506 1 Cylinder Lug Adj. Asy. 19 02978507 1 Spacer Plate

02978508 1 Spacer Plate 20 02978509 2 Wing Lock Pin, 21 02957042 4 Bolt 22 15B600 4 Flat Washer 23 02978510 3 Lynch Pin 24 02978511 1 Slow Moving Vehicle Sign Stand 25 00015800 8 Lock Nut 26 00753642 2 Bolt 27 00037200 2 Lock Nut 28 02978512 1 Bolt Access Cover Plate 29 00012101 2 Lock Washer 30 10180500 2 Bolt 31 02978513 1 Gearbox Asy, CW, 540 RPM

02978971 1 Gearbox Asy, CW, 1000 RPM 32 10180500 2 Bolt 33 02978915 1 SMV Sign 34 02978514 1 Gearbox Asy, Divider, 540 RPM

02978968 1 Gearbox Asy, Divider,1000 RPM 35 00753753 4 Bolt 36 02978515 1 Transport Lock Pin 37 02978516 1 Operator / Parts Manual Box 38 00024100 2 Flat Washer 39 10058000 2 Bolt 40 02962363 2 Lock Nut 41 02978638 1 Hose Clamp

ST15 (Archive Book) 01/04

Nov. 2003

Current

37,38,39

DECK COMPONENTS

Center Section

ST15 / ST10

32,33

ST15-C31200790311

ST15-Current

9,21,22

20,23

23,36

21,24,25,

26,40,41

3,4,31

2,5,6

34,35

10,11,12,13,14,15,

10,12,13,14,15,16

ST15 (Archive Book) 01/04

4,7,8

28,29,30

2,4,5,6

Nov. 2003

Current

DECK COMPONENTS

Center Section

ST15-C31200790311

ST15-Current

ST15 / ST10

Item Part No. Qty. Description

02959332 2 Bolt, (Laminated & Aircraft Tire) 18 02978506 1 Cylinder Lug Adj. Asy. 19 02978507 1 Spacer Plate, (Light Truck Tire)

02978508 1 Spacer Plate, (Laminated & Aircraft Tire) 20 02978509 2 Wing Lock Pin, 21 02957042 4 Bolt 22 15B600 4 Flat Washer 23 02978510 3 Lynch Pin 24 02980471 1 Slow Moving Vehicle Sign Stand 25 00015800 8 Lock Nut 26 00753642 2 Bolt 27 00037200 2 Lock Nut 28 02978512 1 Bolt Access Cover Plate 29 00012101 2 Lock Washer 30 10180500 2 Bolt 31 02978513 1 Gearbox Asy, CW, 540 RPM

02978971 1 Gearbox Asy, CW, 1000 RPM 32 10180500 2 Bolt 33 03200347 1 SMV Sign 34 02978514 1 Gearbox Asy, Divider, 540 RPM

ST15 (Archive Book) 01/04

Jan. 2002

Current

DECK COMPONENTS

Wing Section

ST15 / ST10

ST15-C31200557203

ST15-Current

ST15 (Archive Book) 01/04

Jan. 2002

Current

DECK COMPONENTS

Wing Section

ST15-C31200557203

ST15-Current

ST15 / ST10

Item Part No. Part No. Qty. Description

R-Wing L-Wing

1 02978517 ------------- 1 Wing Asy, R-Wing (Shown)

------------- 02978532 1 Wing Asy, L-Wing (Not Shown 2 02978518 02978518 4 Hinge Pin 3 02978519 02978519 2 Hinge Spacer Tube 4 00749017 00749017 8 Lock Nut 5 10121000 10121000 8 Bolt 6 02978520 02978520 1 Hinge Spacer Tube 7 01408S 01408S 5 Roll Pin 8 15B1600 15B1600 6 Flat washer 9 02978521 02978521 2 Pin 10 02978522 02978522 2 Floating lug 11 000944 000944 6 Lock Nut 12 00755082 00755082 6 Bolt 13 02978523 ------------- 1 Gearbox, CCW R-Wing

------------ 02978533 1 Gearbox, CW L-Wing 14 2A381312 2A381312 3 Plow Bolt 16 02978525 02978525 1 Skid Shoe, L or R Wing 17 00001800 00001800 10 Lock Nut 18 15B800 15B800 10 Flat Washer 19 02978795 02978795 1 Lock Washer 20 331212C 331212C 2 Half Nut 21 02978526 02978526 1 Retainer Pin 22 02892000 02892000 1 Bolt 23 02978527 02978527 1 Clevis Pin 24 02959332 02959332 1 Bolt 25 02978528 02978528 1 Wheel Suspension Plate, Standard 26 00751035 00751035 1 Rubber Sandwich 27 02978529 02978529 1 Wing Wheel Standard Asy. 28 00037200 00037200 5 Lock Nut 29 03200269 03200269 2 Bolt 30 00755153 00755153 1 Cotter Pin 31 001291 001291 1 Grease Nipple, Self tap 32 02978512 02978512 1 Bolt Access Cover Plate 33 00012101 00012101 2 Lock Washer 34 10180500 10180500 2 Bolt 35 02978530 02978530 1 Wing Adj. Assy. 36 00011800 00011800 2 Bolt 37 02776600 02776600 6 Bolt 38 02978531 ------------- 1 Adjustable Side Mount, R-Wing

------------- 02978534 1 Adjustable Side Mount, L-Wing

Note: Qty Shown above is for one Wing, double qty of parts for both wings w/ the exception of items 1, 13 & 38 which must be used on a specific wing.

ST15 (Archive Book) 01/04

Jan. 2002

Current

SKIRT ASY

ST10

ST15-C31200557203

ST15-Current

1,3,7

2,3,7

1,3,7,11

21,23

17,18,20,22

ST15 (Archive Book) 01/04

3,7,15

Jan. 2002

Current

SKIRT ASY

ST10

Item Part No. Qty. Description

1 02891800 2 Bolt

2 02892000 2 Bolt

3 15B800 9 Flat washer

4 02978551 1 Chain guard, double

5 250-145 2 Bolt

7 00001800 9 Lock nut

8 02978552 1 Hinge pin

9 02030300 4 Lock nut

10 02978553 1 Skirt Assy, 10' Unit Only

11 02978554 1 Hinge pin

12 02978555 2 Counter weight

13 15B1600 4 Flat washer

14 00755305 2 Bolt

15 2A381312 5 Plow bolt,

16 02978556 1 Skirt skid

17 00015800 3 Lock nut

18 02978557 3 Chain, 11 links

19 02975147 4 Bolt

20 15B600 3 Flat washer

21 15B1200 4 Flat washer

22 00752675 3 Bolt

23 000944 4 Lock nut

ST15-C31200557203

ST15-Current

ST15 (Archive Book) 01/04

Jan. 2002

Current

TONGUE ASY.

ST15 / ST10

15 14

ST15-C31200557203

ST15-Current

ST15 (Archive Book) 01/04

Jan. 2002

Current

TONGUE ASY.

ST15-C31200557203

ST15 / ST10

Item Part No. Qty. Description

1 15B1600 3 Flat Washer

2 01408S 3 Roll Pin

3 02978536 1 Hitch Clevis, Standard Clevis

4 02978537 1 Pivoting Hitch Asy.

5 02978538 1 Pivot Hitch Weld Sleeve

6 02891800 1 Bolt

7 15B800 3 Flat Washer

8 00001800 3 Lock Nut

9 001291 6 Grease Fitting

10 02978539 1 Hitch Frame Assy.

11 02978540 2 Retaining Pin

12 02892000 2 Bolt

13 02978547 1 Retaining Pin

14 02978548 1 PTO Storage Support

15 02978549 1 Bent Hitch Pin

16 02978550 1 Hitch Pin Clip

ST15-Current

Note: Item # 3 is the standard Tongue Hitch Clevis , there is an Optional Hitch Clevis offered called Precision Hitch Kit # 02978611. See Parts break down for this optional hitch.

ST15 (Archive Book) 01/04

+ 51 hidden pages