Alamo Maverick Boom Arm Mower User Manual

BOOM ARM

MOWER

Rev 09-08 Part No. 02981992P

PART'S MANUAL

An Operator's Manual was shipped with the equipment in the Manual Canister. This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment. If the Operator's Manual is not with the equipment, contact your dealer or Alamo Industrial (830-379-1480) to obtain a Free copy before operating the equipment.

ALAMO INDUSTRIAL

1502 E. Walnut Seguin, Texas 78155 830-379-1480

TO THE OWNER/OPERATOR/DEALER

All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents.

BEFORE YOU START!! Read the safety messages on the implement and shown in your manual.

Observe the rules of safety and common sense!

FAILING TO FOLLOW SAFETY MESSAGES AND OPERATING INSTRUCTION CAN CAUSE

SERIOUS BODILY INJURY OR EVEN DEATH TO OPERATOR AND OTHERS IN THE AREA.

1. 2.NO RIDERS. NO

READ

1. Study and understand Operator’s Manuals, Safety Decals, and Instructional Decals for tractor and implement to prevent misuse, abuse, and accidents. Practice before operating in a confined area or near passersby.

¥ Learn how to stop engine suddenly in an emergency. Be alert for passersby and especially children.

2. Allow no children on or near folding mower or tractor. Allow no riders on tractor or implement. Falling off may cause serious injury or death from being run over by tractor or mower or contact with rotating blades.

3. Operate only with tractor having Roll-Over Protective Structure (ROPS) and with seat belt securely fastened to prevent injury and possible death from falling off or tractor overturn.

¥ Personal Protective Equipment such as Hard Hat, Safety Glasses, Safety Shoes, & Ear Plugs are recommended.

4. Block up or support raised machine and all lifted components securely before putting hands or feet under or working underneath any lifted component to prevent crushing injury or death from sudden dropping or inadvertent operation of controls. Make certain area is clear before lowering or folding.

5. Before transporting, put Lift Lever in detent or full-lift position. Install Transport Safety Devices securely on folding mowers. Put Booms securely in Transport Rest.

¥ Folding and Boom Mowers have raised center of gravity. Slow down when turning and on hillsides.

6. Make certain that SMV sign, warning lights, and reflectors are clearly visible. Follow local traffic codes.

7. Never operate with Cutting Head or Folding Section raised if passersby, bystanders, or traffic are in the area to reduce possibility of injury or death from objects thrown by Blades under Guards or mower structure.

8. Before dismounting, secure implement in transport position or lower to ground.

¥ Put tractor in park or set brake, disengage PTO, stop engine, remove key, and wait until noise of rotation has ceased to

prevent crushing by entanglement in rotating parts which could cause injury or death.

¥ Never mount or dismount a moving vehicle. Crushing form runover may cause serious injury or death.

MANUAL

CHILDREN OPERATORS.

3. USE SAFETY SHOES,

HARD HAT, SAFETY GLASSES, SEAT BELTS, ROPS & OPS.

4. BLOCK UP SECURELY

BEFORE WORKING UNDER.

5. TRANSPORT SAFELY,

LOCK UP.

6. USE SMV, LIGHTS, &

REFLECTORS.

7. DO NOT OPERATE

WITH CUTTER OR WING RAISED

8. DO NOT MOUNT OR

DISMOUNT WHILE MOVING.

02967827

WARRANTY INFORMATION:

Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration Form in full and return it within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card and on the Warranty Form that you retain. The use of "will-fit" parts will void your warranty and can cause catastrophic failure with possible injury or death.

PARTS

SECTION

Parts Section

PARTS ORDERING GUIDE

The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this section.

1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locate the parts and quantities required.

2. The Purchase Order must include the name and address of the person or organization ordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts are ordered.

3. The Purchase Order must clearly list the quantity of each part, the complete and correct part number (be sure to include all periods), and the basic name of the part.

4. The Manufacturer reserves the right to substitute parts where applicable.

5. Some parts are unlisted items which are special production items not normally stocked and are subject to special handling. Request a quotation for such parts before sending a Purchase Order.

6. The Manufacturer reserves the right to change prices without prior notice.

NOTE: Please refer to The Safety Section in the front of this Manual for the proper

Part Number when ordering Replacement Safety Decals.

For maximum safety and to guarantee optimum product reliability, always use genuine Servis-Rhino Parts. The use of inferior replacement parts may cause premature or catastrophic failure which could result in serious injury or death. Direct any questions regarding parts to:

ALAMO INDUSTRIAL

1502 E. Walnut Seguin, Texas 78155 830-379-1480

Parts Section

PART NAME INDEX

48 IN FLAIL AXE - ROTOR W/KNIVES.................................................................................................................................................... 6

48 IN FLAIL AXE - SWIVEL KIT ASY...................................................................................................................................................... 7

48 IN FLAIL AXE HEAD ASY - PISTON MOTOR - STD MT (PART 1)................................................................................................. 9

48 IN FLAIL AXE HEAD ASY - PISTON MOTOR - STD MT (PART 2)............................................................................................... 11

48 IN FLAIL AXE HEAD ASY - PISTON MOTOR - SWIVEL MT (PART 1)....................................................................................... 13

48 IN FLAIL AXE HEAD ASY - PISTON MOTOR - SWIVEL MT (PART 2)....................................................................................... 15

50 IN ROTARY - BLADE BAR ASY - PN 02982906............................................................................................................................... 17

50 IN ROTARY - DECAL LOCATION..................................................................................................................................................... 18

50 IN ROTARY - PAN ASY - 02964804.................................................................................................................................................... 19

50 IN ROTARY - SWIVEL HEAD ASY - PN 02984823.......................................................................................................................... 21

50 IN ROTARY - SWIVEL HEAD SUB-ASY - PN 02984823................................................................................................................. 23

60 IN GRASS FLAIL - CUTTERSHAFT................................................................................................................................................... 25

60 IN GRASS FLAIL - CUTTERSHAFT BRGS........................................................................................................................................ 26

60 IN GRASS FLAIL - HEAD ASY STANDARD.................................................................................................................................... 27

60 IN GRASS FLAIL - HEAD ASY SWIVEL........................................................................................................................................... 29

60 IN GRASS FLAIL - HEAD SUB-ASY.................................................................................................................................................. 31

60 IN GRASS FLAIL - PULLEY ASY....................................................................................................................................................... 33

60 IN GRASS FLAIL - ROLLER ASY....................................................................................................................................................... 35

60 IN ROTARY - BLADE BAR ASY - PN 02969230............................................................................................................................... 36

60 IN ROTARY - DECAL LOCATION..................................................................................................................................................... 37

60 IN ROTARY - HEAD ASY - PN 02981782........................................................................................................................................... 39

60 IN ROTARY - HEAD SUB-ASY - PN 02981789................................................................................................................................. 41

60 IN ROTARY - HYD CYL ASY - DOOR - PN 02961480A.................................................................................................................. 43

60 IN ROTARY - HYD CYL ASY - HEAD SWIVEL - PN 02981315..................................................................................................... 44

60 IN ROTARY - HYD HOSE ROUTING................................................................................................................................................. 45

60 IN ROTARY - MOTOR & SPINDLE ASY........................................................................................................................................... 46

60 IN ROTARY - MOTOR ASY (PARTS) - PN 02979881 (PART 1)...................................................................................................... 47

60 IN ROTARY - MOTOR ASY (PARTS) - PN 02979881 (PART 2)...................................................................................................... 49

60 IN ROTARY - SPINDLE ASY - PN 02968859..................................................................................................................................... 51

BOOM ASY (24 FT BOOM GEN 1) - PN 02981777 (PART 1)................................................................................................................ 53

BOOM ASY (24 FT BOOM GEN 1) - PN 02981777 (PART 2)................................................................................................................ 55

BOOM ASY (30 FT BOOM GEN 1) - PN 02981778 (PART 1)................................................................................................................ 57

BOOM ASY (30 FT BOOM GEN 1) - PN 02981778 (PART 2)................................................................................................................ 59

BOOM ASY (24 FT BOOM GEN 2) - PN 02986684 (PART 1)................................................................................................................ 61

BOOM ASY (24 FT BOOM GEN 2) - PN 02986684 (PART 2)................................................................................................................ 63

BOOM ASY (30 FT BOOM GEN 2) - PN 02986683 (PART 1)................................................................................................................ 65

BOOM ASY (30 FT BOOM GEN 2) - PN 02986683 (PART 2)................................................................................................................ 67

BUZZ BAR ASY - 48 IN HEAD GEN 1 (PART 1).................................................................................................................................... 69

BUZZ BAR ASY - 48 IN HEAD GEN 1 (PART 2).................................................................................................................................... 71

BUZZ BAR ASY - 48 IN HEAD GEN 1 (PART 3).................................................................................................................................... 73

PART NAME INDEX

BUZZ BAR ASY - 48 IN HEAD GEN 2 (PART 1).................................................................................................................................... 75

BUZZ BAR ASY - 48 IN HEAD GEN 2 (PART 2).................................................................................................................................... 77

BUZZ BAR ASY - 69 IN HEAD GEN 1 (PART 1).................................................................................................................................... 79

BUZZ BAR ASY - 69 IN HEAD GEN 1 (PART 2).................................................................................................................................... 81

BUZZ BAR ASY - 69 IN HEAD GEN 1 (PART 3).................................................................................................................................... 83

BUZZ BAR ASY - 69 IN HEAD GEN 2 (PART 1).................................................................................................................................... 85

BUZZ BAR ASY - 69 IN HEAD GEN 2 (PART 2).................................................................................................................................... 87

BUZZ BAR ASY - 90 IN HEAD GEN 1 (PART 1).................................................................................................................................... 89

BUZZ BAR ASY - 90 IN HEAD GEN 1 (PART 2).................................................................................................................................... 91

BUZZ BAR ASY - 90 IN HEAD GEN 1 (PART 3).................................................................................................................................... 93

BUZZ BAR ASY - 90 IN HEAD GEN 2 (PART 1).................................................................................................................................... 95

BUZZ BAR ASY - 90 IN HEAD GEN 2 (PART 2).................................................................................................................................... 97

BUZZ BAR SPINDLE ASY - SN BB-01219.............................................................................................................................................. 99

COMMON CRATE COMPONENTS....................................................................................................................................................... 101

DECALS - 24 FT BOOM GEN 1.............................................................................................................................................................. 103

DECALS - 30 FT BOOM GEN 1.............................................................................................................................................................. 104

DECALS - 24 FT BOOM GEN 2.............................................................................................................................................................. 105

DECALS - 30 FT BOOM GEN 2.............................................................................................................................................................. 106

DECALS - COUNTER WEIGHT.............................................................................................................................................................. 107

DECALS - HYD TANK............................................................................................................................................................................ 108

DECALS - TRACTOR CAB..................................................................................................................................................................... 109

DITCHER - SPINDLE ASY...................................................................................................................................................................... 110

DITCHER BLADE HEAD ASY - ROUGH CUT..................................................................................................................................... 111

DITCHER HEAD ASY.............................................................................................................................................................................. 113

DITCHER HEAD DEFLECTOR CYLINDER......................................................................................................................................... 115

DIVERTER VALVE ASY - PN 02977622............................................................................................................................................... 116

EMERGENCY STOP SWITCH - PN 02964028A.................................................................................................................................... 117

FILTER ASY - PRESSURE - PN 02981371............................................................................................................................................. 118

FILTER ASY - PRESSURE - PN 02985279............................................................................................................................................. 119

FILTER ASY - RETURN - PN 02981391................................................................................................................................................. 120

FILTER ASY - RETURN - PN 02985828................................................................................................................................................. 121

HYD ASY KIT - PN 02981803................................................................................................................................................................. 123

HYD CYL ASY - DIPPER (24-30 FT BOOM) - PN 02981277............................................................................................................... 125

HYD CYL ASY - EXTENSION (24-30 FT BOOM) - PN 02981276....................................................................................................... 126

HYD CYL ASY - LIFT (24 FT BOOM) - PN 02981279.......................................................................................................................... 127

HYD CYL ASY - LIFT (30 FT BOOM) - PN 02981278.......................................................................................................................... 128

HYD CYL ASY - SWING W/ SPHERICAL ROD END (24/30 FT) - PN 02981275A........................................................................... 129

HYD CYL ASY - SWING W/ TUBE ROD END (24/30 FT) - PN 02981275......................................................................................... 130

HYD CYL ASY - TILT (24-30 FT BOOM) - PN 02981280.................................................................................................................... 131

PART NAME INDEX

HYD HOSE ROUTING - BOOM - 24 FT BOOM.................................................................................................................................... 133

HYD HOSE ROUTING - BOOM - 24 FT BOOM NEW.......................................................................................................................... 135

HYD HOSE ROUTING - BOOM - 24 FT BOOM NEW HOSE ROUTING........................................................................................... 137

HYD HOSE ROUTING - BOOM - 30 FT BOOM.................................................................................................................................... 139

HYD HOSE ROUTING - BOOM - 30 FT BOOM NEW.......................................................................................................................... 141

HYD HOSE ROUTING - BOOM - 30 FT BOOM NEW HOSE ROUTING........................................................................................... 143

HYD HOSE ROUTING - SWING CYL - 24-30 FT BOOM.................................................................................................................... 145

HYD KIT - HOSE ROUTING................................................................................................................................................................... 146

HYD LOCK VALVE SOLENOID ASY - PN 02972208 (OLD STYLE)................................................................................................ 147

HYD LOCK VALVE SOLENOID ASY - PN 02972208A (NEW STYLE)............................................................................................ 148

HYD OIL COOLER - PN 02981377......................................................................................................................................................... 149

HYD TANK ASY - PN 02981388............................................................................................................................................................. 151

JOYSTICK ASY - P/N 02981374.............................................................................................................................................................. 153

PUMP ASY (SERVO CONTROLLED) - PN 02978986 (PART 1)......................................................................................................... 155

PUMP ASY (SERVO CONTROLLED) - PN 02978986 (PART 2)......................................................................................................... 157

PUMP-TANK-VALVE COVER - PN 02981381...................................................................................................................................... 159

UNDER MOUNT FRAME ASY - PN 02986426 (PART 1)..................................................................................................................... 161

UNDER MOUNT FRAME ASY - PN 02986426 (PART 2)..................................................................................................................... 163

VALVE ASY W-FITTINGS - PN 02981888............................................................................................................................................ 165

WIRING HARNESS.................................................................................................................................................................................. 167

48 IN FLAIL AXE - ROTOR W/KNIVES

ITEM PART NO. QTY. DESCRIPTION

02957655M 1 ROTOR W/KNIVES ASY 1 02958540 1 KIT - BLADE, FLAIL AXE 2 02956943 32 FLAIL HANGER BUSHING 3 02956949 16 HHCS HANGER BOLT PER DWG 4 02980976 16 LOCKNUT,CENTERLOCK 5/8 NC PLC

48 IN FLAIL AXE - SWIVEL KIT ASY

Continued... ITEM PART NO. QTY. DESCRIPTION

02984479 1 48" FLAIL AXE SWIVEL KIT ASY 1 02970324 1 HITCH POST CLAMP PLATE 2 00001800 1 LOCKNUT, 1/2" NC PLB 3 00037200 12 LOCKNUT, 3/4-NC GRC PL 4 00008200 1 HEX HEAD BOLT, 1/2"-NC X 3-3/4" PL5 5 02960018 2 ADAPTER HYD ELBOW, 4MB-4MJ90 6 02918600 10 HEX HEAD BOLT, 3/4"-10"UNC 2 PL8 7 02984370 1 HITCH POST SWIVEL ADAPTER 8 02981318 1 SLEW BEARING, 12 OD X 5.8 ID 9 02981741 1 HITCH POST SWIVEL WLD’MT 10 02981315 1 CYLINDER, 2.5"B X 1.5"R X 14.38S 11 02984374 1 CYLINDER MOUNT WLD’MT 12 02981820 28 SOCKET HEAD CAP SCREW, 1/2" NC 1-1/2" PL8 13 02963646 1 HEX HEAD BOLT, 3/4" NC 2-1/2" PL8 14 00754105 1 HEX HEAD BOLT, 3/4" NC 4-1/2" PL8 15 02984382 1 SWIVEL CLAMP PLATE 16 02984470 2 FLAIL AXE DOOR STOP 17 00021400 2 HEX HEAD BOLT, 1/4" NC 3/4" PL5 18 02959924 2 LOCKNUT, 1/4" NC PLB 19 02968832 1 PLASTIC TIE, GREEN 20 02968833 1 PLASTIC TIE, GREEN & WHITE

48 IN FLAIL AXE HEAD ASY - PISTON MOTOR - STD MT (PART 1)

Continued... ITEM PART NO. QTY. DESCRIPTION

02983554 1 48" FLAIL AXE ASY, PISTON MOTOR, STD MT 1 02970301 1 FLAIL AXE HEAD WLD’MT 2 02957655M 1 ROTOR W/ KNIVES, FLAIL AXE 3 02970465 1 DOOR WLD’MT, FLAIL AXE 4 02973256 1 MOTOR MOUNT WLD’MT, W/O STUDS 5 02970709 1 INSIDE COVER PLATE 6 10119000 2 HEX HEAD BOLT, 5/16" X 1" NC GR5 7 00023500 6 FLATWASHER, 5/16" PL 8 00750940 2 LOCKNUT, 5/16" NC PLB 9 02958131A 2 FLANGE BEARING ASY, 2" BORE 10 02956714 1 BAR CLAMP 11 02956712 1 RUBBER FLAP, 6" X 48-1/2" 12 02970326 1 F/A DOOR HINGE 13 02958198 1 KEY, 1/2" X 1/2" X 1 7/8"LG 14 02970585 1 SKID SHOE WLD’MT 15 02956748 1 SKID SHOE WLD’MT 16 02970540 1 ROLLER WLD’MT 17 02967325 2 PULLEY, 3G5V-8.50 DIA. 18 02970325 1 BELT & PULLEY COVER PLATE 19 02972442 1 BEARING GUARD 20 02970763 1 PISTON MOTOR, 2.48 CU.IN./REV 21 02675800 2 HEX HEAD BOLT, 5/8"-11UNC 1-1/2" PL5 22 00010300 2 LOCKWASHER, 5/8" 23 00001400 4 FLATWASHER, 5/8" PL STD 24 00019300 8 HEX HEAD BOLT, 1/2" NC 1-1/2" PL5 25 000642 8 CENTERLOCK NUT, 1/2"NF 26 00752670 1 GREASE FITTING, 1/4"-28 BOLT THD 27 00008300 6 HEX HEAD BOLT, 5/8" NC 1-3/4" PL5 28 00695100 5 LOCKNUT, 5/8"NC PLB 29 02970710A 1 HYD CYLINDER, 1-1/2"BORE X 3-3/4" 30 02970324 1 HITCH POST CLAMP PLATE 31 000941 1 GREASE FITTING,1/4"-28X90 32 02970583 4 SOCKET HEAD SET SCREW, 3/8"-NF X 1-1/2" PL5 33 23504500 8 JAM NUT, 3/8" NF PLB 34 03200925 1 CARRIAGE BOLT, 5/8"-11UNC 3"LG PL5 35 02967328 1 QD - HUB BUSHING, SF 1-15/16" DIA. 36 02970725 1 QD - HUB, SF 1-1/8"DIA.BORE 37 00013500 3 HEX JAM NUT, 5/8" NC PL 38 02970539 3 V-BELT 39 02956768 2 ROLL PIN, 5/32" X 1" 40 00011700 4 LOCKWASHER, 5/16" PL STD

48 IN FLAIL AXE HEAD ASY - PISTON MOTOR - STD MT (PART 2)

Continued... ITEM PART NO. QTY. DESCRIPTION

48 IN FLAIL AXE HEAD ASY - PISTON MOTOR - SWIVEL MT (PART 1)

Continued... ITEM PART NO. QTY. DESCRIPTION

02984371 1 48" FLAIL AXE ASY, PISTON MOTOR, SWIVEL MT 1 02970301 1 FLAIL AXE HEAD WLD’MT 2 02957655M 1 ROTOR W/ KNIVES, FLAIL AXE 3 02970465 1 DOOR WLD’MT, FLAIL AXE 4 02973256 1 MOTOR MOUNT WLD’MT, W/O STUDS 5 02970709 1 INSIDE COVER PLATE 6 10119000 2 HEX HEAD BOLT, 5/16" X 1" NC GR5 7 00023500 6 FLATWASHER, 5/16" PL 8 00750940 2 LOCKNUT, 5/16" NC PLB 9 02958131A 2 FLANGE BEARING ASY, 2" BORE 10 02956714 1 BAR CLAMP 11 02956712 1 RUBBER FLAP, 6" X 48-1/2" 12 02970326 1 F/A DOOR HINGE 13 02958198 1 KEY, 1/2" X 1/2" X 1 7/8"LG 14 02970585 1 SKID SHOE WLD’MT 15 02956748 1 SKID SHOE WLD’MT 16 02970540 1 ROLLER WLD’MT 17 02967325 2 PULLEY, 3G5V-8.50 DIA. 18 02970325 1 BELT & PULLEY COVER PLATE 19 02972442 1 BEARING GUARD 20 02970763 1 PISTON MOTOR, 2.48 CU.IN./REV 21 02675800 2 HEX HEAD BOLT, 5/8"-11UNC 1-1/2" PL5 22 00010300 2 LOCKWASHER, 5/8" 23 00001400 4 FLATWASHER, 5/8" PL STD 24 00019300 8 HEX HEAD BOLT, 1/2" NC 1-1/2" PL5 25 000642 8 CENTERLOCK NUT, 1/2"NF 26 00752670 1 GREASE FITTING, 1/4"-28 BOLT THD 27 00008300 6 HEX HEAD BOLT, 5/8" NC 1-3/4" PL5 28 00695100 5 LOCKNUT, 5/8"NC PLB 29 02970710A 1 HYD CYLINDER, 1-1/2"BORE X 3-3/4" 30 02970324 1 HITCH POST CLAMP PLATE 31 000941 1 GREASE FITTING,1/4"-28X90 32 02970583 4 SOCKET HEAD SET SCREW, 3/8"-NF X 1-1/2" PL5 33 23504500 8 JAM NUT, 3/8" NF PLB 34 03200925 1 CARRIAGE BOLT, 5/8"-11UNC 3"LG PL5 35 02967328 1 QD - HUB BUSHING, SF 1-15/16" DIA. 36 02970725 1 QD - HUB, SF 1-1/8"DIA.BORE 37 00013500 3 HEX JAM NUT, 5/8" NC PL 38 02970539 3 V-BELT 39 02956768 2 ROLL PIN, 5/32" X 1" 40 00011700 4 LOCKWASHER, 5/16" PL STD

48 IN FLAIL AXE HEAD ASY - PISTON MOTOR - SWIVEL MT (PART 2)

Continued... ITEM PART NO. QTY. DESCRIPTION

41 00035900 4 BOLT, HEX HD 5/16-NC X 3/4 GR5 42 00001800 10 LOCKNUT TLM 1/2 NC PLB 43 00002700 7 FLATWASHER 1/2 PL STD 44 02892000 7 HHCS, 1/2"-13 NC x 1-1/2" PL8 45 02957041 2 ROLLER BEARING AND FLANGE 46 00013300 2 HEXB 1/2 NC 2 PL5 47 00753642 2 HEXB 3/8 NC X 1-1/4 PL5 48 02970586 2 WASHER,2OD,7/16 ID X 3/16 49 00023100 6 HHCS 3/8 -16UNC 1-1/2 PL5 50 00015800 6 LOCKNUT TLM 3/8-NC PLC 51 00003300 1 HEXB 3/4 NC 4 PL5 52 00037200 13 NUT 3/4-NC TOPLOCK GRC PL 53 00008200 1 HEXB 1/2NC X 3-3/4 PL5 54 02960018 4 ADP HYD ELBOW 4MB-4MJ90 55 02918600 10 HEXB 3/4-10UNC 2 PL8 56 02981757 2 WELDMENT, PIN, HITCH POST 57 02971702 2 FLATWASHER 1-3/8 TYPE B NARROW 58 02971701 2 NUT SLOT 1-3/8 12NF PLB 59 165020 2 PIN, COTTER 5/16 X 2-1/2 PL 60 02043600 2 ADP HYD ELBOW 16MB -16MJ 45 61 00696800 1 ADP HYD STGHT 8MB-8MJ 62 02968896 1 PLASTIC TIE ORANGE 11LG 63 02968894 1 PLASTIC TIE RED 11LG 64 02968895 1 PLASTIC TIE BLUE 11LG 65 02984370 1 ADP, SWIVEL, HITCHPOST 66 02981318 1 SLEW BEARING, 12 OD X 5.8 ID 67 02981741 1 WELDMENT, HITCH POST, SWIVEL 68 02981315 1 CYLINDER, 2.5B X 1.5R X 14.38S 69 02984374 1 WLDMNT, MOUNT, CYLINDER 70 02981820 28 SHCS 1/2 NC 1-1/2 PL8 71 02963646 1 HHCS 3/4 NC 2-1/2 PL8 72 00754105 1 HHCS 3/4 NC 4-1/2 PL8 73 02984382 1 CLAMP, PLATE, SWIVEL 74 02984470 2 STOP, DOOR, FLAIL AXE 75 00021400 2 HEXB 1/4 NC 3/4 PL5 76 02959924 2 NUT TOPLOCK 1/4 NC PLB 77 02968832 1 PLASTIC TIE GRN 4" 78 02968833 1 PLASTIC TIE G/W 4LG 79 02968836 1 PLASTIC TIE YEL 4LG 80 02968837 1 PLASTIC TIE Y/W 4LG 95 03200521 1 STEP KEY 1/4 X 5/16

50 IN ROTARY - BLADE BAR ASY - PN 02982906

ITEM PART NO. QTY. DESCRIPTION

1 02982912 1 LEAF, MIDDLE, BLADE BAR 2 02982913 1 LEAF, BOTTOM, BLADE BAR 3 02962635 2 BLADE, CW ROTATION 4 02982934 1 WLDMT. TOP BLADE BAR 5 02782900 2 BOLT, BLADE 6 02957089 2 LOCKWASHER 1-1/8 PL STD 7 00020900 2 NUT, SLOTTED, HVY,1-1/8NF PL GR5 8 00023200 2 PIN, ROLL, 3/16X1-3/4 9 15C2000 4 WASHER, 1.375 X 2.50 X .165, HARDENED 10 02969235 2 HHCS, 1-1/4X3 PL GR8 11 02969236 2 HHCS, 1-1/4X2-1/4 PL GR8

50 IN ROTARY - DECAL LOCATION

ITEM PART NO. QTY. DESCRIPTION

1 00011100 32 FLATWASHER 3/8 STD 2 00023100 8 HHCS 3/8 X 1-1/2 NC PL GR5 3 00015800 16 LOCKNUT TLM 3/8 NC PLC 4 00007000 8 HHCS 3/8 NC 1-3/4 PL5 5 00757139 2 DECAL, LOGO (ALAMO BY T.K.) 6 00757140 1 DECAL, ALAMO INDUSTRIAL LOGO 7 00769736 1 DECAL, USE/REPAIR GUARDS 8 00769737 2 DECAL, BLADES THROWN OBJECTS 9 02925100 1 DECAL, REPLACEMENT PARTS 10 02967827 1 DECAL, MULTI HAZARD 11 2738332 1 DECAL, RED OBLONG REFLECTOR 12 2738333 1 DECAL, YELLOW OBLONG REFLECTOR 13 02967867 1 DECAL, DANGER SAFETY SHIELD 14 02982927 1 DECAL, 50 ROTARY

50 IN ROTARY - PAN ASY - 02964804

ITEM PART NO. QTY. DESCRIPTION

1 02964826 1 PAN,MACHINED 28.00 BC 2 02964828 1 SPIDER, MACHNED 28.00 BC 3 00755623 3 WASHER 2.200 OD1.218 1DX.250 4 00020900 3 NUT SLOT HVY 1-1/8 NF PL5 5 00023200 3 PIN ROLL 3/16X1-3/4 6 02964815 4 BUSHING, BLADE BOLT 7 02964954 3 KEY,5/16 SQ X 15/16 LONG 8 02965229 3 WASHER, 2-19/32 ID 5.0 OD 3/16 9 02964330 3 KEYED BLADE BOLT 10 02962722 1 BLADES-SET OF 3(50B/A HEAD) 11 7A16824 3 HHCS 1 NC 3 PL5 12 00748547 6 FLATWASHER 1-1/32 X

50 IN ROTARY - PAN ASY - 02964804

Continued... ITEM PART NO. QTY. DESCRIPTION

13 02964162 3 SPACER BLADE PAN WITH SPIDER 14 02030300 3 NUT TOPLOCK 1 NC PLB

50 IN ROTARY - SWIVEL HEAD ASY - PN 02984823

ITEM PART NO. QTY. DESCRIPTION

1 02961480A 1 HYD, CYLINDER 2B X 1R X 9-1/4S 2 02982914 1 WELDMENT, DOOR 3 02982915 1 ROD-HINGE 4 99338S 2 PIN ROLL 1/4 X 3/4 5 02982919 2 DEBRIS DEFLECTOR 6 02982918 1 FLAP HOLD DOWN BAR 7 02982920 2 REAR FLAP 10 X 53 X 3/8 THK 8 02982921 1 REAR CLAMP BAR 9 00011100 36 FLATWASHER 3/8 STD 10 00023100 11 HHCS 3/8 X 1-1/2 NC PL GR5 11 00015800 34 LOCKNUT TLM 3/8 NC PLC 12 00007000 9 HHCS 3/8 NC 1-3/4 PL5 13 02981315 1 CYLINDER, 2.5B X 1.5R X 14.38S 14 02981757 2 WELDMENT, PIN, HITCH POST 15 02971702 2 FLATWASHER, 1-3/8 TYPE B PL NARROW 16 02971701 2 NUT, SLOTTED 1-3/8 12NF PLB

50 IN ROTARY - SWIVEL HEAD ASY - PN 02984823

Continued... ITEM PART NO. QTY. DESCRIPTION

17 165020 2 PIN, COTTER 5/16 X 2-1/2 PL 18 651102 1 PIN-DRILLED 19 02976448 1 PIN - MACHINED HEAD 20 00755153 2 PIN, COTTER 3/16 X 1-1/2 PL 21 03200267 1 HHCS 3/4 NC 5 PL8 22 02963646 1 HHCS 3/4 NC 2-1/2 PL8 23 00037200 18 LOCKNUT TLM 3/4 NC PLC 24 02968837 1 PLASTIC TIE, YELLOW & WHITE 25 02968836 1 PLASTIC TIE, YELLOW 26 02960018 2 ADP, HYD, ELBOW, 4MB-4MJ90 27 02968832 1 PLASTIC TIE, GREEN 28 02968833 1 PLASTIC TIE, GREEN & WHITE 29 03200762 2 ADP, HYD 6MB-4MJ 90 30 02972817 1 ADP HYD ELBOW 10MB - 8MJ 45 DEG 31 02968894 1 PLASTIC TIE, RED, 11LG 32 02968895 1 PLASTIC TIE, BLUE, 11LG 33 02968896 1 PLASTIC TIE, ORANGE, 11LG 34 3710151 4 METAL TACK 35 02982926 1 PLATE, S/N 50" MAVERICK ROTARY HEAD

50 IN ROTARY - SWIVEL HEAD SUB-ASY - PN 02984823

Continued... ITEM PART NO. QTY. DESCRIPTION

1 00011100 32 FLATWASHER 3/8 STD 2 00023100 8 HHCS 3/8 X 1-1/2 NC PL GR5 3 00007000 8 HHCS 3/8 NC 1-3/4 PL5 4 02980236 8 HHCS 7/16 NC X 4 1/2"LG PL5 5 02891800 4 HHCS 1/2 NC 1-3/4 PL8 6 02979881 1 MOTOR PISTON 4.91 CID 7 00022200 8 LOCKWASHER 7/16 PL 8 00019600 4 LOCKWASHER 1/2 HEAVY 9 02981819 2 ADP HYD STGHT 16FLH-16MJ SPCL 10 02980237 2 O-RING .139 DIA X 1.296 INSIDE 11 02982907 2 SKID SHOE 12 02981820 28 SHCS 1/2 NC X 1 1/2" LG PL8 13 02981318 1 SLEWING BEARING, 12 OD X 5.8 ID 14 02981741 1 WELDMENT, HITCH POST, MAVERICK 15 02981411 1 WELDMENT, DECK 50" HEAD 16 02961038 1 GASKET 17 02964804 1 PAN ASSY 50" HEAD

02982906 1 BLADE BAR ASSY 50" 18 02981752 1 PLATE, HITCH POST BOTTOM, MAVERICK 19 02964861 4 SHCS 3/4 NC 4" LG PL8 20 00015800 14 LOCKNUT TLM 3/8 NC PLC 21 15B600 14 WASHER 3/8 SAE P 22 00003901 4 LOCKWASHER 3/4 HEAVY 23 00059700 14 FSCS 3/8 NC X 1-1/4 24 02968859 1 ASSEMBLY, SPINDLE HOUSING-SPLINED 25 03200269 1 HHCS 3/4 NC 3 PL8 26 02892100 2 HHCS 3/4 NC X 1 3/4" LG 27 00037200 3 NUT 3/4 NC LOCKNUT 28 5312316 2 FLATWASHER 3/4 HARDENED

60 IN GRASS FLAIL - CUTTERSHAFT

ITEM PART NO. QTY. DESCRIPTION

72.753.01 1 CUTTERSHAFT ASY, W/ KNIVES (1500 HEAD) 1 09.597.01 1 CUTTERSHAFT WLD`MT 2 05.775.10 40 BOLT 3 05.282.08 40 WASHER 4 05.968.06 40 LOCKNUT 5 09.517.01 40 SHACKLE 6 09.528.01 80 FLAIL KNIFE, SMOOTH STD

02975613 80 FLAIL KNIFE, SERRATED OPT

60 IN GRASS FLAIL - CUTTERSHAFT BRGS

ITEM PART NO. QTY. DESCRIPTION

72.736.01 1 BEARING ASY, GRASS FLAIL 1500 HEAD 1 02.824.01 2 WASHER 2 05.264.23 10 SETSCREW 3 05.264.25 4 SETSCREW 4 05.282.03 12 SPRING WASHER 5 05.283.03 2 SHAKE PROOF WASHER 6 05.286.03 10 NUT 7 05.345.05 4 BOLT, SOCKET HEAD COUNTER SUNK 8 06.219.01 2 DISC, SHIELD 9 06.221.01 2 BEARING ASY 10 09.584.01 1 BEARING PLATE, NON-DRIVE END 11 09.584.01 1 BOLT, ADJUSTING 12 09.586.01 1 BEARING PLATE, DRIVE END 13 09.588.01 1 GUARD, NON-DRIVE END

60 IN GRASS FLAIL - HEAD ASY STANDARD

ITEM PART NO. QTY. DESCRIPTION

02972460 1 GRASS FLAIL HEAD ASY

2 00015800 1 LOCKNUT

+ 144 hidden pages