Alamo MACHETE 02968915P User Manual

Boom Arm Mower

Rev 0-11 Part No. 02968915P

PART'S MANUAL

An Operator's Manual was shipped with the equipment in the Manual Canister. This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment. If the Operator's Manual is not with the equipment, contact your dealer or Alamo Industrial (800-356-6286) to obtain a Free copy before operating the equipment.

ALAMO INDUSTRIAL

1502 E. Walnut Seguin, Texas 78155 210-372-3551

TO THE OWNER/OPERATOR/DEALER

All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents.

BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe the rules of safety and common sense!

WARRANTY INFORMATION:

Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration Form in full and return it within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card and on the Warranty Form that

you retain. The use of "will-t" parts will void your warranty and can cause catastrophic failure with possible injury or death.

BOLT TORQUE

Mounting procedures for mowers will require a signicant amount of bolt nut and washer installation.

Frame and structure mounting bolts should be installed using Red Loctite, and torqued to the dry values listed in the torque chart based on the bolt size and hardness.

Other structures such as pump mounting bolts should be installed with Blue Loctite and torqued to the dry values indicated in the chart.

Bolt tightness should be completed with and checked with a suitable torque wrench.

Torque checks should be completed throughout the life of the mower in accordance with the maintenance chart provided in this manual.

Loose bolts on a frame or in a casting may be a result of:

● Vibration from the mower due to imbalance of the mower blades

● Pulled threads due to over tightening

● Distortion of the hole due to under tightening during installation

Bolts broken or sheared in the mounting structure or tractor may be the result of:

● Improper alignment of the Mounting Plate or Structure such that it is not sitting at on the mating surface

● Distortion of the bolt due to over-tightening

● Under tightening of the bolts

Check the bolt torque during installation and prior to delivery with a suitable torque wrench.

PARTS

SECTION

Parts Section – 1

PARTS ORDERING GUIDE

The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this section.

1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locate the parts and quantities required.

2. The Purchase Order must include the name and address of the person or organization ordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts are ordered.

3. The Purchase Order must clearly list the quantity of each part, the complete and correct part number (be sure to include all periods), and the basic name of the part.

4. The Manufacturer reserves the right to substitute parts where applicable.

5. Some parts are unlisted items which are special production items not normally stocked and

are subject to special handling. Request a quotation for such parts before sending a Purchase

Order.

6. The Manufacturer reserves the right to change prices without prior notice.

For maximum safety and to guarantee optimum product reliability, always use genuine Alamo Industrial Parts. The use of inferior replacement parts may cause premature or catastrophic failure which could result in serious injury or death. Direct any questions regarding parts to:

ALAMO INDUSTRIAL

1502 E. Walnut Seguin, Texas 78155 830-379-1480

Parts Section – 2

PART NAME INDEX

50 IN BLADE CARRIER ASY (PAN) - PN 02964457................................................................................................................................. 6

50 IN BOOM AXE HEAD SUB ASSEMBLY............................................................................................................................................. 7

50 IN BOOM AXE HEAD ASSEMBLY...................................................................................................................................................... 9

50 IN MOTOR & SPINDLE ASY............................................................................................................................................................... 11

50 IN MOTOR ASY - PARTS - PN 02979881 (PART 1).......................................................................................................................... 13

50 IN MOTOR ASY - PARTS - PN 02979881 (PART 2).......................................................................................................................... 15

50 IN SPINDLE ASY - PN 02960553B...................................................................................................................................................... 17

60 IN BLADE CARRIER ASY (BAR) - PN 02969230.............................................................................................................................. 18

60 IN DOOR CYL ASY - PN 02961480A.................................................................................................................................................. 19

60 IN HEAD ASY - SN 02050 & DOWN................................................................................................................................................... 21

60 IN HEAD ASY - SN 02051 & UP.......................................................................................................................................................... 23

60 IN HEAD SUB-ASY - SN 02050 & DOWN.......................................................................................................................................... 25

60 IN HEAD SUB-ASY - SN 02051 & UP................................................................................................................................................. 27

60 IN MOTOR ASY - PARTS - PN 02979881 - SN 02051 (PART 1)....................................................................................................... 29

60 IN MOTOR ASY - PARTS - PN 02979881 - SN 02051 (PART 2)....................................................................................................... 31

60 IN SPINDLE ASY - PN 02968859A...................................................................................................................................................... 33

BOOM ASY - 17 FT (OPT ALLOY STEEL) - PN 02980034.................................................................................................................... 35

BOOM ASY - 17 FT (STD STEEL) - PN 02979902.................................................................................................................................. 37

BOOM ASY - 21 FT (STD & ALLOY STEEL) (PART 1)........................................................................................................................ 39

BOOM ASY - 21 FT (STD & ALLOY STEEL) (PART 2)........................................................................................................................ 41

BOOM ASY - 24 FT (STD & ALLOY STEEL) (PART 1)........................................................................................................................ 43

BOOM ASY - 24 FT (STD & ALLOY STEEL) (PART 2)........................................................................................................................ 45

BOOM HOSE SCHEMATIC - 17 FT BOOM ARM.................................................................................................................................. 47

BOOM HOSE SCHEMATIC - 21 FT BOOM ARM.................................................................................................................................. 49

BOOM HOSE SCHEMATIC - 24 FT BOOM ARM.................................................................................................................................. 51

BUZZ BAR - HYD MOTOR PARTS - P/N 02975175............................................................................................................................... 53

BUZZ BAR ASY - 48 IN - GEN 1 (PART 1)............................................................................................................................................. 55

BUZZ BAR ASY - 48 IN - GEN 1 (PART 2)............................................................................................................................................. 57

BUZZ BAR ASY - 48 IN - GEN 1 (PART 3)............................................................................................................................................. 59

BUZZ BAR ASY - 48 IN - GEN 2 (PART 1)............................................................................................................................................. 61

BUZZ BAR ASY - 48 IN - GEN 2 (PART 2)............................................................................................................................................. 63

BUZZ BAR ASY - 69 IN - GEN 1 (PART 1)............................................................................................................................................. 65

BUZZ BAR ASY - 69 IN - GEN 1 (PART 2)............................................................................................................................................. 67

BUZZ BAR ASY - 69 IN - GEN 1 (PART 3)............................................................................................................................................. 69

BUZZ BAR ASY - 69 IN - GEN 2 (PART 1)............................................................................................................................................. 71

BUZZ BAR ASY - 69 IN - GEN 2 (PART 2)............................................................................................................................................. 73

BUZZ BAR ASY - 90 IN - GEN 1 (PART 1)............................................................................................................................................. 75

BUZZ BAR ASY - 90 IN - GEN 1 (PART 2)............................................................................................................................................. 77

BUZZ BAR ASY - 90 IN - GEN 1 (PART 3)............................................................................................................................................. 79

BUZZ BAR ASY - 90 IN - GEN 2 (PART 1)............................................................................................................................................. 81

PART NAME INDEX

BUZZ BAR ASY - 90 IN - GEN 2 (PART 2)............................................................................................................................................. 83

BUZZ BAR MOTOR ASSEMBLY............................................................................................................................................................. 85

BUZZ BAR SPINDLE ASY - SN BB-01219.............................................................................................................................................. 87

DITCHER - BLADE CARRIER ASY......................................................................................................................................................... 88

DITCHER - HOUSING ASY...................................................................................................................................................................... 89

DITCHER - SPINDLE ASY........................................................................................................................................................................ 91

DITCHER BLADE HEAD ASY - ROUGH CUT....................................................................................................................................... 93

DITCHER HEAD ASY - (NEW STYLE)................................................................................................................................................... 95

DITCHER HEAD ASY - (OLD STYLE).................................................................................................................................................... 97

DITCHER HEAD DEFLECTOR CYLINDER........................................................................................................................................... 99

FILTER ASY - PN 02976066.................................................................................................................................................................... 101

FILTER ASY - PN 02985280.................................................................................................................................................................... 103

FLAIL AXE - DOOR CYL ASY - PN 02970710A................................................................................................................................... 104

FLAIL AXE - HEAD ASY (PART 1)....................................................................................................................................................... 105

FLAIL AXE - HEAD ASY (PART 2)....................................................................................................................................................... 107

FLAIL AXE - HOSE CONNECTIONS..................................................................................................................................................... 109

FLAIL AXE - ROTOR W/KNIVES.......................................................................................................................................................... 110

FML100H FLAIL - HEAD ASY (PART 1).............................................................................................................................................. 111

FML100H FLAIL - HEAD ASY (PART 2).............................................................................................................................................. 113

FML100H FLAIL - HEAD ASY (PART 3).............................................................................................................................................. 115

FML100H FLAIL - SPINDLE ASY - PN 02969661................................................................................................................................ 117

GRASS FLAIL - CUTTERSHAFT ASY.................................................................................................................................................. 118

GRASS FLAIL - CUTTERSHAFT BRGS................................................................................................................................................ 119

GRASS FLAIL - HEAD ASY................................................................................................................................................................... 121

GRASS FLAIL - HEAD SUB-ASY.......................................................................................................................................................... 123

GRASS FLAIL - PULLEY ASY............................................................................................................................................................... 125

GRASS FLAIL - ROLLER ASY............................................................................................................................................................... 127

HIGH FRAME ASY - 2 WD & 4 WD....................................................................................................................................................... 129

HYD CYL ASY - DIPPER - PN 02967174A (21 & 24 FT)...................................................................................................................... 131

HYD CYL ASY - DIPPER - PN 02979920 (17 FT).................................................................................................................................. 132

HYD CYL ASY - LIFT - PN 02967173A................................................................................................................................................. 133

HYD CYL ASY - SWING - PN 02967172A............................................................................................................................................. 134

HYD CYL ASY - TILT - PN 02967175A................................................................................................................................................. 135

HYD LOCK VALVE SOLENOID ASY - PN 02972208 (OLD STYLE)................................................................................................ 136

HYD LOCK VALVE SOLENOID ASY - PN 02972208A (NEW STYLE)............................................................................................ 137

HYD TANK ASY - PN 02976712 (OCFD) & PN 02976765 (CCLS)...................................................................................................... 139

HYD TANK SUB-ASY - PN 02976767.................................................................................................................................................... 141

JOYSTICK CONSOLE ASY..................................................................................................................................................................... 143

KING POST SUB-ASY............................................................................................................................................................................. 145

PART NAME INDEX

MOUNTING COMPONENTS - COMMON BOX (PART 1).................................................................................................................. 147

MOUNTING COMPONENTS - COMMON BOX (PART 2).................................................................................................................. 149

MOUNTING COMPONENTS - COMMON BOX (PART 3).................................................................................................................. 151

PUMP ASY - SERVO CONTROLED - PN 02969527A (PART 1)......................................................................................................... 153

PUMP ASY - SERVO CONTROLED - PN 02969527A (PART 2)......................................................................................................... 155

TIMBERCAT - HEAD ASY (PART 1)..................................................................................................................................................... 157

TIMBERCAT - HEAD ASY (PART 2)..................................................................................................................................................... 159

VALVE - PARTS - OPEN & CLOSED CENTER.................................................................................................................................... 161

VALVE ASY - 5 SPOOL (CCLS)............................................................................................................................................................. 163

VALVE ASY - 5 SPOOL (OCFD)............................................................................................................................................................ 165

50 IN BLADE CARRIER ASY (PAN) - PN 02964457

ITEM PART NO. QTY. DESCRIPTION

02964457 - BLADE / SPIDER PAN ASY 1 02964804 1 SPIDER PAN SUB-ASY (W/ ITEMS 7,8,9 & 10) 2 02962722 1 BLADE SET, MATCHED SET OF 3 3 02964330 3 BLADE BOLT 4 00755623 3 WASHER, SPECIAL ( HARDENED ) 5 00023200 3 ROLL PIN 6 00020900 3 SLOTTED HEX NUT, 1-1/8"-NF PL GR5 7 02030300 3 LOCKNUT, 1"-NC PLB 8 00748547 3 FLATWASHER, 1-1/32" X 2-3/16" X.22" 9 02964162 3 SPACER 10 7A16824 3 BOLT, HEX HEAD 1"-NC X 3"PL GR5 11 00003901 4 LOCKWASHER, 3/4" PL HEAVY 12 02886600 4 BOLT, SOCKET HEAD 3/4"-NC X 2-1/2" PL GR8 13 02964954 3 KEY 14 02964161 3 BUSHING 15 02965229 3 SPACER

50 IN BOOM AXE HEAD SUB ASSEMBLY

Continued... ITEM PART NO. QTY. DESCRIPTION

02980202 1 ASY, 50" B/A ROT PISTON 1 02974664 1 X-FRAME SQ. HD. WLDMT. 50" 2 02980205 1 WELDMENT, HITCHPOST ADAPTER 3 02980204 1 ASY, MOTOR/SPINDLE 4 02964457 1 PAN ASSY 50" HEAD 5 02984822 1 SPACER BLADE PAN 6 02960882 1 R.H. SKID SHOE 7 02960883 1 L. H. SKID SHOE 8 00011100 46 FLATWASHER 3/8 STD 9 00015800 39 LOCKNUT TLM 3/8 NC PLC 10 00059700 7 FSCS 3/8 NC X 1-1/4 11 00003901 4 LOCKWASHER 3/4 HEAVY 12 00037200 20 NUT 3/4 NC LOCKNUT 13 02964861 4 SHCS 3/4 NC 4" LG PL8 14 02973438 6 HHCS 3/4 NC 3-1/4 PL8 15 02959390 14 HHCS 3/4 NC 2-1/4 PL8 16 02980373 1 ADP HYD STGHT 10MB-16MJ 17 02968896 1 PLASTIC TIE, ORANGE, 11LG 18 02968895 1 PLASTIC TIE, BLUE, 11LG 19 02968894 1 PLASTIC TIE, RED, 11LG

50 IN BOOM AXE HEAD ASSEMBLY

Continued... ITEM PART NO. QTY. DESCRIPTION

02980202 1 ASY, 50" B/A ROT PISTON 1 02974664 1 X-FRAME SQ. HD. WLDMT. 50" 2 02974483 1 WLDMT DOOR - BA50 3 02971928 1 WLDMT, HITCHPOST, MACHETE 4 02961480A 1 HYD CYLINDER 2BORE X 9-1/4 STROKE 5 02960885 2 FLAP, FRONT DEFLECTOR 6 02960886 2 REAR FLAP MODIFIED 7 02975227 6 FLAP, 13 X 8 8 02975228 2 FLAP, 13X8-TAPER END 9 02957380 1 SIDE GUARD 10 02957496 1 REAR FLAP RETAINER 11 5710121 1 PLATE, INSPECTION COVER 12 02960018 2 ADP, HYD, ELBOW, 4MB-4MJ90 13 00753642 6 HHCS 3/8 NC 1-1/4 PL5 14 00011100 46 FLATWASHER 3/8 STD 15 00015800 39 LOCKNUT TLM 3/8 NC PLC 16 02035800 23 WASHER, 3/8", SPECIAL PLATED 17 00007000 23 HHCS 3/8 NC 1-3/4 PL5 18 5F5180 2 NUT, 5/16 NC WING 19 00755153 2 PIN, COTTER 3/16 X 1-1/2 PL 20 02976448 1 PIN - MACHINED HEAD 21 651102 1 PIN-DRILLED 22 00037200 20 NUT 3/4 NC LOCKNUT 23 00011400 2 BOLT, HHCS 3/8 NC 1 PL5 24 02959390 14 HHCS 3/4 NC 2-1/4 PL8 25 02970595 1 HHCS 3/8 NC 2-3/4 PL8 26 02971701 1 NUT, SLOTTED 1-3/8 12NF PLB 27 02971702 1 FLATWASHER, 1-3/8 TYPE B PL NARROW 28 02971720 1 PIN WLDMNT, 11-1/2" LONG 29 02971756 1 PIN - 1/2 X 9 CHROME 30 165020 1 PIN, COTTER 5/16 X 2-1/2 PL 31 02968836 1 PLASTIC TIE, YELLOW 32 02968837 1 PLASTIC TIE, YELLOW & WHITE

50 IN MOTOR & SPINDLE ASY

Continued... ITEM PART NO. QTY. DESCRIPTION

02980204 - MOTOR & SPINDLE ASY, F/ 50" ROTARY HEAD 1 02979881 1 MOTOR ASY, PISTON TYPE MOTOR 2 02960553B 1 SPINDLE ASY, SPLINED TYPE 3 02961038 1 GASKET, F/ MOTOR TO SPINDLE 4 02981819 4 ADP HYD STGHT 16FLH-16MJ SPCL 5 02981819 2 ADP HYD STGHT 16FLH-16MJ SPCL 6 02980237 2 O-RING 7 02980373 1 ADAPTER, STRAIGHT 8 02980236 8 BOLT 9 00022200 8 LOCKWASHER 10 02891800 4 BOLT 11 00019600 4 LOCKWASHER

50 IN MOTOR ASY - PARTS - PN 02979881 (PART 1)

Continued... ITEM PART NO. QTY. DESCRIPTION

02979881 - MOTOR ASY, PISTON TYPE 1 02980529 1 BARREL HOUSING ASY 2 02980530 1 VALVE PLATE (IN ITEM 39) 4 02980536 1 NOZZLE 5 02980537 1 PLUG ASY, HEXAGON 6 02980538 1 BEARING HOUSING 7 02980539 1 O-RING (IN ITEM 39 & 40) 8 02980540 1 O-RING (IN ITEM 39 & 40) 9 02980541 1 SEAL CARRIER 10 02980542 1 SHAFT SEAL (IN ITEM 39 & 40) 11 02980543 1 SPACER WASHER

02988818 1 SEAL, SHAFT 12 02980544 1 RETAINING RING 13 02980545 1 RETAINING RING 14 02980546 1 SHAFT ASY 15 02980548 1 CYLINDER BARREL (IN ITEM 39) 16 02980549 1 BARREL SUPPORT 17 02980550 7 PISTON ASY (IN ITEM 39) 18 02989112 1 KIT, 21 PISTON RINGS 19 02980552 1 RING GEAR 20 02980553 1 BEARING ASY, CUP & CONE 21 02980554 1 BEARING ASY, CUP & CONE 22 02980555 - SPACER WASHER 23 02980556 1 RETAINING RING 24 02980557 - SHIM, .020" (0.5)

02980558 - SHIM, .007" (0.2)

02980559 - SHIM, .015" (0.4)

02980560 - SHIM, .023" (0.6)

02980561 - SHIM, .030" (0.8)

02980562 - SHIM, .039" (1.0)

02980563 - SHIM, .027" (0.7) 25 02980564 4 BOLT, SOCKET HEAD 26 02980565 4 LOCKWASHER M13 X 19.5 27 02980547 1 GUIDE PIN 28 02980571 1 RELIEF MANIFOLD

02980570 - SEAL KIT, F/ RELIEF VALVE 29 02980568 1 RELIEF VALVE, 4061 PSI (280 BAR) 30 02980569 1 RELIEF VALVE, 4786 PSI (330 BAR) 31 02980237 2 O-RING 32 02980531 1 FLAT KEY 33 02980532 2 BALL

50 IN MOTOR ASY - PARTS - PN 02979881 (PART 2)

Continued... ITEM PART NO. QTY. DESCRIPTION

34 02980533 1 HEXAGON PLUG 35 02980534 2 O-RING 36 02980535 2 PLUG ASY 37 02980572 2 PLUG ASY 38 02980573 1 PLUG ASY 39 02980566 1 REBUILD KIT (ITEMS 2,7,8,10,15 & 17) 40 02980567 1 SEAL KIT (ITEMS 7,8 &10)

50 IN SPINDLE ASY - PN 02960553B

ITEM PART NO. QTY. DESCRIPTION

02960553B - SPINDLE & HOUSING ASY 1 02963815 1 HOUSING 2 02960561 1 SPINDLE 3 02960558 1 BEARING RING 4 02960559 1 SEAL 5 00754627 1 SNAP RING 6 02960557 1 BEARING ASY, CUP & CONE 7 00769938 1 BEARING ASY, CUP & CONE 8 02962030 1 NUT 9 02979570 1 GREASE RELIEF FITTING 10 00003500 1 GREASE FITTING

60 IN BLADE CARRIER ASY (BAR) - PN 02969230

ITEM PART NO. QTY. DESCRIPTION

02969230 - BLADE BAR ASY 1 00020900 2 NUT 2 00023200 2 ROLL PIN 3 02969234 4 FLATWASHER 4 02761500 1 BLADE SET, MATCHED SET OF 2 5 02971387 1 BLADE BAR LEAF, TOP LEAF 6 02969232 1 BLADE BAR LEAF, MIDDLE LEAF 7 02969233 1 BLADE BAR LEAF, BOTTOM LEAF 8 02969235 2 BOLT, LONG BOLT 9 02969236 2 BOLT, SHORT BOLT 10 02782900 2 BLADE BOLT 11 02957089 2 LOCKWASHER 12 00003901 - LOCKWASHER, 3/4" PL HEAVY 13 02964861 - BOLT, SOCKET HEAD 3/4"-NC X 4" PL GR8 14 02984572 1 BLADE BOLTS, NUTS, ROLLPIN KIT (INCLUDES 2 EACH OF ITEMS 1, 2, & 10)

60 IN DOOR CYL ASY - PN 02961480A

ITEM PART NO. QTY. DESCRIPTION

02961480A - DOOR CYLINDER ASY 1 5JRC12160 1 LOCKNUT 2 33309 1 PISTON 3 02975865 1 ROD WLD`MT 4 02975866 1 TUBE / BARRELL WLD`MT 5 02975867 1 CYLINDER HEAD 6 * SEAL KIT 1 ROD WIPER SEAL (IN ITEM 12) 7 * SEAL KIT 1 ROD SEAL (IN ITEM 12) 8 * SEAL KIT 1 O-RING (IN ITEM 12) 9 * SEAL KIT 1 SEAL (IN ITEM 12) 10 * SEAL KIT 1 PISTON SEAL (IN ITEM 12) 11 ---------------- - O-RING F/ O-RING BOSS FITTING 12 02975528 1 SEAL KIT (ITEMS 6 THRU 10)

THIS PAGE INTENTIONAL LEFT BLANK

60 IN HEAD ASY - SN 02050 & DOWN

Continued... ITEM PART NO. QTY. DESCRIPTION

02968858 - ROTARY HEAD ASY, 60" W/ BAR CARRIER (NON-SALABLE) 2 00011100 46 FLATWASHER 3 00015800 24 LOCKNUT 4 00007000 12 BOLT 5 00755153 2 COTTER PIN 6 02970595 1 BOLT 8 NFS 1 SERIAL NUMBER PLATE 9 02971701 1 SLOTTED NUT 10 00023100 11 BOLT 11 00756875 1 FLAP HOLD DOWN BAR 12 00759862 2 SHIELD, DEBRIS DEFLECTOR 13 02767500 1 HEX WRENCH, SPECIAL 14 02976448 1 PIN 15 02885700 2 REAR FLAP 16 02885800 1 REAR CLAMP BAR 17 651102 1 PIN 18 02960018 2 ADAPTER, ELBOW 19 02961480 1 CYLINDER ASY 20 02971720 1 PIN WLD`MT 21 02971756 1 PIN 22 02967775 1 DOOR 23 02967782 1 ROD, HINGE 24 02968836 1 PLASTIC TIE, YELLOW 25 02968837 3 PLASTIC TIE, YELLOW / WHITE 26 02968856 - ROTARY HEAD SUB-ASY, 60" (NON-SALABLE) 27 02968873 - DECALS, (SEE SAFETY SECTION) 28 02968874 1 HOSE, (LARGE) - W/ RED TIE - PRESSURE HOSE 29 02968875 1 HOSE, (LARGE) - W/ ORANGE TIE - RETURN HOSE 30 02968876 1 HOSE, (LARGE) - W/ BLUE TIE - CASE DRAIN 31 02968877 1 HOSE, (SMALL) - W/ YELLOW / WHITE - DOOR CYL 32 02968878 1 HOSE, (SMALL) - W/ YELLOW TIE - DOOR CYL 33 02968894 1 PLASTIC TIE, RED 34 02968895 1 PLASTIC TIE, BLUE 35 02968896 1 PLASTIC TIE, ORANGE 36 02971702 1 WASHER 37 3710151 2 METAL TACK 38 99338S 1 ROLL PIN 39 165020 1 COTTER PIN

60 IN HEAD ASY - SN 02051 & UP

Continued... ITEM PART NO. QTY. DESCRIPTION

02968858 - ROTARY HEAD ASY, 60" W/BAR CARRIER (NON-SALABLE) 2 00011100 45 FLATWASHER 3 00015800 23 LOCKNUT 4 00007000 11 BOLT 5 00755153 2 COTTER PIN 6 02970595 1 BOLT 8 02971500 1 PLATE, ALAMO S/N 9 02971701 1 NUT 10 00023100 10 BOLT 11 00756875 1 FLAP HOLD DOWN BAR 12 00759862 2 SHIELD, DEBRIS DEFLECTOR 13 02767500 1 HEX WRENCH, MODIFIED 14 02976448 1 PIN, 2-1/2" LONG 15 02885700 1 REAR FLAP, 10" HIGH X 63" LONG 16 02885800 1 REAR CLAMP BAR 17 651102 1 PIN, 2" LONG 18 02960018 2 ADAPTER, ELBOW 19 02961480 1 CYLINDER ASY, DOOR 20 02971720 1 PIN WLD`MT, 11-1/2" LONG 21 02971756 1 PIN, 9" LONG 22 02971963 1 DOOR WLD`MT 23 02967782 1 ROD, HINGE 24 02968836 1 PLASTIC TIE, YELLOW 25 02968837 1 PLASTIC TIE, YELLOW & WHITE 26 02968856 1 60" SQ. HD SUB-ASY. 27 02968873 1 DECAL KIT 28 02968874 1 HOSE, # 16 W/ RED PLASTIC TIE 29 02968875 1 HOSE, # 16 W/ ORANGE PLASTIC TIE 30 02968876 1 HOSE, # 16 W/ BLUE PLASTIC TIE 31 02968877 1 HOSE, # 4 W/ YELLOW & WHITE PLASTIC TIE 32 02968878 1 HOSE, # 4 W/ YELLOW PLASTIC TIE 33 02968894 1 PLASTIC TIE, RED 34 02968895 1 PLASTIC TIE, BLUE 35 02968896 1 PLASTIC TIE, ORANGE 36 02971702 1 WASHER, NARROW 37 3710151 2 METAL TACK 38 99338S 2 ROLL PIN 39 00010600 2 BOLT 48 165020 1 COTTER PIN

60 IN HEAD SUB-ASY - SN 02050 & DOWN

Continued... ITEM PART NO. QTY. DESCRIPTION

02968858 - ROTARY HEAD SUB-ASY, 60" (NON-SALABLE) 1 00003901 4 LOCKWASHER 2 00015800 14 LOCKNUT 3 00037200 16 LOCKNUT 4 00059700 14 BOLT 5 02979020 8 NUT 6 03200269 8 BOLT 7 02969230 1 BLADE BAR ASY 8 02892100 8 BOLT 9 02966899 2 SKID SHOE 10 02966900 1 DECK HEAD 11 02971928 1 HITCH POST 13 02964861 4 BOLT, SOCKET HEAD 14 5312316 16 FLATWASHER, HARDENED SPECIAL 15 15B600 14 WASHER 16 W67 16 WASHER 17 00019600 4 LOCKWASHER 18 00750316 2 HYDRAULIC FITTING, ELBOW 19 00750317 2 SPLIT FLANGE KIT 20 02891800 4 HYDRAULIC FITTING, ELBOW 21 02958782 1 ADAPTER, HYD, STRAIGHT 22 02961038 1 GASKET, SPINDLE / MOTOR 23 02967193B 1 MOTOR ASY 24 02968859A 1 SPINDLE HOUSING 25 02978878 1 MOTOR PLATE 26 02970752 4 TIE ROD 29 02979021 16 NUT 31 02972094 1 SEAL KIT, VALVE BLOCK TO MOTOR 32 02971574 1 CARTRIDGE, RELIEF (4000 PSI) 32A 02981685 1 O-RING 32B 02981686 1 O-RING 32C 02981687 1 O-RING 32D 02981688 2 BACK-UP RING 33 02979511 1 GASKET, END COVER 34 02977905 1 MOTOR SEAL KIT

60 IN HEAD SUB-ASY - SN 02051 & UP

+ 144 hidden pages