Alamo A-Boom User Manual

Download

Page 1

A-BOOM

BOOM ARM MOWER

Effective Serial No. 04837 through CurrentRev 12-08 Part No. 02924700P

PARTS MANUAL

ALAMO INDUSTRIAL

1502 E. Walnut Seguin, Texas 78155 210-372-3551

Page 2

Page 3

TO THE OWNER/OPERATOR/DEALER

RED

002369

LOCK UP.

5. TRANSPORT SAFELY,

6. USE SMV, LIGHTS, &

REFLECTORS.

7. DO NOT OPERATE WITH MOWER OR WING RAISED.

8. DO NOT MOUNT OR DISMOUNT WHILE MOVING.

4. BLOCK UP SECURELY BEFORE WORKING UNDER.

3. USE SAFETY SHOES,HARD HAT, SAFETY GLASSES, SEAT BELTS, & ROPS.

2. NO RIDERS, NO CHILDREN

OPERATORS.

MANUAL

READ

Never mount or dismount a moving vehicle. Crushing from runover may cause injury or death.

Put tractor in park or set brake, disengage PTO, stop engine, remove key, and wait until noise of rotation has ceased

to prevent entanglement in rotating parts which may cause injury or death.

8. Before dismounting, secure flail mower in transport position or lower to ground.

7. Never operate with Flail Mower or Folding Section raised if passersby, bystandards or traffic are in the area to reduce possibility of injury or death from objects thrown by Blades under Shields or implement structure.

6. Make certain that SMV sign, Warning Lights, and Reflectors are clearly visible. Follow local traffic codes.

Install Restrictor in folding circuit to slow down lowering and unfolding if action is faster than is desirable.

5. Before transporting, put Lift Lever in detent or full-lift position. Install Transport Safety Devices securely on folding implements. Slowdown when turning and on hillsides.

4. Block up or support raised machine and all lifted components securely before putting hands or feet under or working underneath any lifted component to prevent crushing injury or death from sudden dropping or inadvertent operation of controls. Make certain that area is clear before lowering or folding.

3. Operate only with tractor having Roll-Over Protective Structure (ROPS) and with seatbelt fastened securely and snugly to prevent injury and possible death from falling off or tractor overturn. Personal Protective Equipment such as Hard Hat, Safety Glasses, Safety Shoes, and Ear Plugs are recommended.

2. Allow no children on or near implement of tractor. Allow no riders on tractor or implement. Falling off can cause serious injury or death from being runover by tractor or mower or contact with Flail Mower Blades.

Learn how to stop engine suddenly in an emergency. Be alert for passersby and especially children.

1. Study and understand Operator's Manuals, Safety Signs, and Instructional Decals for tractor & flail mower to prevent misuse, abuse, & accidents. Practice before operating mower in a confined area or near passersby.

FAILING TO FOLLOW SAFETY MESSAGES AND OPERATING INSTRUCTIONS CAN CAUSE SERIOUS BODILY INJURY OR EVEN DEATH TO OPERATOR AND OTHERS IN THE AREA.

DANGER

All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents.

BEFORE YOU START!! Read the safety messages on the implement and shown in your manual.

Observe the rules of safety and common sense!

FAILING TO FOLLOW SAFETY MESSAGES AND OPERATING INSTRUCTIONS CAN CAUSE SERIOUS BODILY INJURY OR EVEN DEATH TO OPERATOR AND OTHERS IN THE AREA.

2. NO RIDERS, NO CHILDREN

3. USE SAFETY SHOES,HARD HAT, SAFETY GLASSES, SEAT BELTS, & ROPS.

4. BLOCK UP SECURELY BEFORE WORKING UNDER.

Learn how to stop engine suddenly in an emergency. Be alert for passersby and especially children.

5. Before transporting, put Lift Lever in detent or full-lift position. Install Transport Safety Devices securely on folding implements. Slowdown when turning and on hillsides.

Install Restrictor in folding circuit to slow down lowering and unfolding if action is faster than is desirable.

6. Make certain that SMV sign, Warning Lights, and Reflectors are clearly visible. Follow local traffic codes.

8. Before dismounting, secure flail mower in transport position or lower to ground. Put tractor in park or set brake, disengage PTO, stop engine, remove key, and wait until noise of rotation has ceased

to prevent entanglement in rotating parts which may cause injury or death.

Never mount or dismount a moving vehicle. Crushing from runover may cause injury or death.

5. TRANSPORT SAFELY,

6. USE SMV, LIGHTS, &

LOCK UP.

7. DO NOT OPERATE WITH MOWER OR WING RAISED.

8. DO NOT MOUNT OR DISMOUNT WHILE MOVING.

WARRANTY INFORMATION:

Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration Form in full and return it within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card and on the Warranty Form that you retain. The use of "will-fit" parts will void your warranty and can cause catastrophic failure with possible injury or death.

Page 4

PARTS

SECTION

Parts Section – 1

Page 5

PARTS ORDERING GUIDE

The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this section.

1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locate the parts and quantities required.

2. The Purchase Order must include the name and address of the person or organization ordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts are ordered.

3. The Purchase Order must clearly list the quantity of each part, the complete and correct part number (be sure to include all periods), and the basic name of the part.

4. The Manufacturer reserves the right to substitute parts where applicable.

5. Some parts are unlisted items which are special production items not normally stocked and are subject to special handling. Request a quotation for such parts before sending a Purchase Order.

6. The Manufacturer reserves the right to change prices without prior notice.

NOTE: Please refer to The Safety Section in the front of this Manual for the proper

Part Number when ordering Replacement Safety Decals.

For maximum safety and to guarantee optimum product reliability, always use genuine Servis-Rhino Parts. The use of inferior replacement parts may cause premature or catastrophic failure which could result in serious injury or death. Direct any questions regarding parts to:

ALAMO INDUSTRIAL

1502 E. Walnut Seguin, Texas 78155 830-379-1480

Parts Section – 2

Page 6

PART NAME INDEX

28 FT - BOOM DIPPER SECTION (PART 1).............................................................................................................................................. 7

28 FT - BOOM DIPPER SECTION (PART 2).............................................................................................................................................. 9

28 FT - BOOM EXTENSION ARM............................................................................................................................................................ 11

28 FT - BOOM LIFT SECTION.................................................................................................................................................................. 13

28 FT - MOTOR ASY (ROTARY HEAD) - PN 02961029........................................................................................................................ 15

28 FT - MOTOR PARTS (ROTARY HEAD) - PN 02960696.................................................................................................................... 16

28 FT - SPINDLE ASY (ROTARY HEAD) - PN 02960553C................................................................................................................... 17

28 FT - X-FRAME SQ HEAD (PARTS) - PN 02962177........................................................................................................................... 19

28 FT - X-FRAME SQ HEAD ASY - PN 02962177.................................................................................................................................. 21

50 IN - X-FRAME BLADE CARRIER ASY (DUAL BAR) - PN 02962721............................................................................................ 22

50 IN - X-FRAME BLADE CARRIER ASY (PAN) - PN 02964457......................................................................................................... 23

50 IN - X-FRAME BLADE CARRIER ASY (SINGLE BAR) - PN 02971745......................................................................................... 24

50 IN - X-FRAME SQ HEAD ASY............................................................................................................................................................ 25

50 IN - X-FRAME SQ HEAD MOTOR (PARTS)...................................................................................................................................... 27

50 IN - X-FRAME SQ HEAD MOTOR ASY W- FITTINGS.................................................................................................................... 29

60 IN - SQ HEAD ASY (BOOM-AXE)...................................................................................................................................................... 31

60 IN - SQ HEAD MOTOR (PARTS)......................................................................................................................................................... 33

60 IN - SQ HEAD MOTOR ASY................................................................................................................................................................ 35

60 IN - SQ HEAD SPINDLE - MOTOR & BLADE BAR......................................................................................................................... 37

60 IN - SQ HEAD SPINDLE ASY.............................................................................................................................................................. 39

ARTICULATED ARM ASY - (17 FT) (PART 1)...................................................................................................................................... 41

ARTICULATED ARM ASY - (17 FT) (PART 2)...................................................................................................................................... 43

ARTICULATED ARM ASY - (20-23 FT) (PART 1)................................................................................................................................. 45

ARTICULATED ARM ASY - (20-23 FT) (PART 2)................................................................................................................................. 47

BUZZ BAR - HYD MOTOR (PARTS) - PN 02975175............................................................................................................................. 49

BUZZ BAR HEAD ASY 48 IN - SN 01307 (11-01) & UP (PAGE 1)....................................................................................................... 51

BUZZ BAR HEAD ASY 48 IN - SN 01307 (11-01) & UP (PAGE 2)....................................................................................................... 53

BUZZ BAR HEAD ASY 48 IN - SN 01307 (11-01) & UP (PAGE 3)....................................................................................................... 55

BUZZ BAR HEAD ASY 69 IN - SN 01307 (11-01) & UP (PART 1)........................................................................................................ 57

BUZZ BAR HEAD ASY 69 IN - SN 01307 (11-01) & UP (PART 2)........................................................................................................ 59

BUZZ BAR HEAD ASY 69 IN - SN 01307 (11-01) & UP (PART 3)........................................................................................................ 61

BUZZ BAR HEAD ASY 90 IN - SN 01306 (10-31) & DOWN (PART 1)................................................................................................ 63

BUZZ BAR HEAD ASY 90 IN - SN 01306 (10-31) & DOWN (PART 2)................................................................................................ 65

BUZZ BAR HEAD ASY 90 IN - SN 01307 (11-01) & UP (PART 1)........................................................................................................ 67

BUZZ BAR HEAD ASY 90 IN - SN 01307 (11-01) & UP (PART 2)........................................................................................................ 69

BUZZ BAR HEAD ASY 90 IN - SN 01307 (11-01) & UP (PART 3)........................................................................................................ 71

BUZZ BAR SPINDLE ASY - SN BB-01219.............................................................................................................................................. 73

CAGE ASY - UNIVERSAL MOUNT......................................................................................................................................................... 75

DITCHER - BLADE HEAD ASY (FWD ROT) - PN 02875301................................................................................................................ 77

DITCHER - BLADE HEAD ASY (REV ROT) - PN 02898501................................................................................................................. 78

Page 7

PART NAME INDEX

DITCHER - HEAD ASY - PN 02215413.................................................................................................................................................... 79

DITCHER - HOUSING ASY (FWD ROT) - PN 02873900....................................................................................................................... 80

DITCHER - HOUSING ASY (REV ROT) - PN 02898600........................................................................................................................ 81

DITCHER - HYD SCHEMATIC W-PARTS.............................................................................................................................................. 83

DITCHER - MOTOR ASY (NEW STYLE) - PN 02978110...................................................................................................................... 85

DITCHER - MOTOR ASY (OLD STYLE) - PN 02870100....................................................................................................................... 86

DITCHER - MOTOR PARTS (NEW STYLE) - PN 02978110.................................................................................................................. 87

DITCHER - MOTOR PARTS (OLD STYLE) - PN 02870100................................................................................................................... 89

DITCHER - SPINDLE ASY - PN 02872300............................................................................................................................................... 91

DITCHER - SPINDLE ASY - PN 02973336............................................................................................................................................... 92

FILTER ASY - PN 02961000...................................................................................................................................................................... 93

FLAIL AXE - HEAD ASY (SN 04250 & UP) (PART 1)........................................................................................................................... 95

FLAIL AXE - HEAD ASY (SN 04250 & UP) (PART 2)........................................................................................................................... 97

FLAIL AXE - MOTOR ASY (SN FA-04250 & UP) - PN 02963893......................................................................................................... 99

FLAIL AXE - MOTOR PARTS (SN FA-04250 & UP) - PN 02961678.................................................................................................. 101

HVY DTY FLAIL - 48 IN AND 60 IN HEAD ASY (PART 1)............................................................................................................... 103

HVY DTY FLAIL - 48 IN AND 60 IN HEAD ASY (PART 2)............................................................................................................... 105

HVY DTY FLAIL - GAUGE WHEELS................................................................................................................................................... 107

HYD CUTTER VALVE - PN 02957254................................................................................................................................................... 109

HYD CUTTER VALVE ASY - PN 02961090.......................................................................................................................................... 111

HYD CUTTER VALVE ASY INSTALLATION - PN 02960565............................................................................................................ 112

HYD CYL ASY - DIPPER (17 FT) - PN 02967017.................................................................................................................................. 113

HYD CYL ASY - DIPPER (20-23 FT) - PN 02961780T.......................................................................................................................... 115

HYD CYL ASY - DIPPER (28 FT) - PN 02222000 (03-00 & DOWN)................................................................................................... 117

HYD CYL ASY - DIPPER (28 FT) - PN 02222000 (04-00 & UP).......................................................................................................... 119

HYD CYL ASY - EXTENSION (28 FT) - PN 02961485C...................................................................................................................... 121

HYD CYL ASY - LIFT (17 FT) - PN 02962297....................................................................................................................................... 123

HYD CYL ASY - LIFT (20-23-28 FT) - PN 02961779............................................................................................................................ 124

HYD CYL ASY - SWING (17-20-23-28 FT) - PN 02961778.................................................................................................................. 125

HYD CYL ASY - TILT (17-20-23 FT) - PN 02967016............................................................................................................................ 126

HYD CYL ASY - TILT (28 FT) - PN 02961787....................................................................................................................................... 127

HYD PUMP ASY (FRONT SINGLE) - PN 02961827............................................................................................................................. 128

HYD PUMP ASY (FRONT TANDEM) - PN 02961826.......................................................................................................................... 129

HYD PUMP ASY (REAR SINGLE 540 RPM) - PN 02962096............................................................................................................... 130

HYD PUMP ASY (REAR TANDEM 540 RPM) - PN 02962097............................................................................................................ 131

HYD PUMP PARTS (FRONT SINGLE) - PN 02961474......................................................................................................................... 133

HYD PUMP PARTS (FRONT TANDEM) - PN 02961735...................................................................................................................... 135

HYD PUMP PARTS (REAR SINGLE 540 RPM) - PN 02964947........................................................................................................... 137

HYD PUMP PARTS (REAR TANDEM 540 RPM) - PN 02964948........................................................................................................ 139

Page 8

PART NAME INDEX

HYD SCHEMATIC (17 FT) (PART 1)..................................................................................................................................................... 141

HYD SCHEMATIC (17 FT) (PART 2)..................................................................................................................................................... 143

HYD SCHEMATIC (20-23 FT) (PART 1)................................................................................................................................................ 145

HYD SCHEMATIC (20-23 FT) (PART 2)................................................................................................................................................ 147

HYD SCHEMATIC W-PARTS (28 FT) (PART 1)................................................................................................................................... 149

HYD SCHEMATIC W-PARTS (28 FT) (PART 2)................................................................................................................................... 151

HYD VALVE BANK (28 FT) - PN 02957610.......................................................................................................................................... 153

HYD VALVE BANK COVER.................................................................................................................................................................. 155

HYD VALVE BANK W- FITTINGS - PN 02962298.............................................................................................................................. 157

HYD VALVE REMOTE CONTROL CABLES & MOUNT................................................................................................................... 159

HYD VALVE SEGMENT - FLOAT......................................................................................................................................................... 161

HYD VALVE SEGMENT - NON-FLOAT............................................................................................................................................... 162

HYDRO FLOAT OPTION........................................................................................................................................................................ 163

JOYSTICK CONSOLE ASY..................................................................................................................................................................... 165

KING POST ATTACHMENT (W-PLAIN BUSHINGS)......................................................................................................................... 167

KING POST ATTACHMENT (W-SERRATED BUSHINGS)................................................................................................................ 169

MAIN FRAME ASY (03-06 & DOWN) (PART 1).................................................................................................................................. 171

MAIN FRAME ASY (03-06 & DOWN) (PART 2).................................................................................................................................. 173

MAIN FRAME ASY (04-06 & UP) (PART 1).......................................................................................................................................... 175

MAIN FRAME ASY (04-06 & UP) (PART 2).......................................................................................................................................... 177

MOUNTING COMPONENTS - COMMON PARTS BOX (OPTION)................................................................................................... 179

SICKLE BAR & BASKET ASY (28 FT BOOM)..................................................................................................................................... 181

SICKLE BAR - BASIC DRIVE (PARTS) - PN 0666200......................................................................................................................... 183

SICKLE BAR - CUTTER BAR ASY........................................................................................................................................................ 185

SICKLE BAR - HEAD ASY - PN 02962179............................................................................................................................................ 187

SICKLE BAR - HYD DRIVE ASY - PN 0666100................................................................................................................................... 189

SICKLE BAR - HYD MOTOR ASY - PN 0447300................................................................................................................................. 191

SICKLE BAR - HYD VALVE - PN 00750053 - (S/N AB-05999 01-04 & DOWN)............................................................................... 193

SICKLE BAR - HYD VALVE - PN 00750053A (S/N AB-06000 & UP)................................................................................................ 195

SICKLE BAR - KNIFE ASY..................................................................................................................................................................... 197

SLOPE MOWER HEAD - BLADE BAR ASY - PN 02957478............................................................................................................... 198

SLOPE MOWER HEAD - CASTER WHEEL ASY................................................................................................................................. 199

SLOPE MOWER HEAD - HEAD ASY - PN 02962174........................................................................................................................... 201

SLOPE MOWER HEAD - HEAD SUB-ASY........................................................................................................................................... 203

SLOPE MOWER HEAD - MOTOR ASY - PN 02960696....................................................................................................................... 204

SLOPE MOWER HEAD - MOTOR PARTS - PN 02960696................................................................................................................... 205

SPEED CHANGER (REAR PTO MNT) - PN 00758991......................................................................................................................... 207

TIMBERCAT - HEAD ASY (PART 1)..................................................................................................................................................... 209

TIMBERCAT - HEAD ASY (PART 2)..................................................................................................................................................... 211

Page 9

PART NAME INDEX

VALVE ASSEMBLY - 4 SPOOL FIXED DISPLACEMENT (OPTION)............................................................................................... 213

VALVE ASSEMBLY - 5 SPOOL FIXED DISPLACEMENT (OPTION)............................................................................................... 215

VALVE ASSEMBLY - OCFD SYS 4 & 5 SPOOL (OPTION)................................................................................................................ 217

Page 10

28 FT - BOOM DIPPER SECTION (PART 1)

Page 11

28 FT - BOOM DIPPER SECTION (PART 1)

Continued... ITEM PART NO. QTY. DESCRIPTION

1 02288400 1 SLEEVE, BOOM WLDMNT 2 02958924 1 EXTENSION ARM WLDMNT 3 02959268 2 BUSHING 4 02957089 1 LOCKWASHER 5 02921700 1 NUT 6 00003901 2 LOCKWASHER 7 00000200 2 NUT 8 02289400 1 ROLLER HOSE 9 00001300 1 LOCKWASHER 10 00001200 1 NUT 11 00003500 6 GREASE FITTING 12 00759946 6 WASHER 13 02030300 1 LOCKNUT 14 02956972 2 BOLT 15 02959302 1 BOLT 16 02758400 2 BOLT 17 02958938 1 PIN, MAIN WLDMNT 18 02289100 2 PIN, ROLLER (LARGE) 19 02289600 7 ROLLER ASY, (LARGE) 20 00606000 7 COTTER PIN 21 02289300 1 PIN, ROLLER (SMALL) 22 02971796 1 CYLINDER ASY, EXTENSION CYL. 23 02905300 2 HOSE, # 4 X 200" LONG 24 02289500 1 ROLLER ASY. (SMALL) 25 02774500 2 WASHER SPACER 26 00037200 2 LOCKNUT 27 02961787 1 TILT CYL ASSY-28 BOOM 28 02960528 1 CYLINDER ASY. 29 02965364 1 HOSE, # 4 X 26" LONG 30 02955365 1 HOSE, # 4 X 12" LONG 31 02960018 2 ELBOW, 90 DEG. 32 02958927 1 LINKAGE ARM ASY. 33 02967021 1 LINKAGE ARM ASY. 34 00752405 1 BOLT 35 02956918 2 CAP 36 02960049 1 PIN WLDMNT, DIPPER 37 02769200 1 BOLT 38 00752670 5 GREASE FITTING 39 00750959 4 BOLT 40 02043900 4 LOCKWASHER 41 02968301 2 HOSE, #4 X 100" LONG

Page 12

28 FT - BOOM DIPPER SECTION (PART 2)

Page 13

28 FT - BOOM DIPPER SECTION (PART 2)

Continued... ITEM PART NO. QTY. DESCRIPTION

42 02223900 2 WEAR PLATE 43 02965357 1 HOSE CLAMP BAR 44 02965358 2 CARRIAGE BOLT 45 02959924 2 LOCKNUT 46 02965367 1 PLATE, TUBING CLAMP 47 00002700 12 FLATWASHER 48 02963111 2 HOSE ROLLER 49 00751582 2 BOLT 50 02959302 3 BOLT 51 00001800 8 LOCKNUT 52 02963110 2 HOSE ROLLER 53 02963109 1 HOSE ROLLER WLDMNT ASY. 54 02968308 1 HOSE CLAMP WLDMNT

00015800 2 LOCKNUT, F/ ITEM 54 (NOT SHOWN)

Page 14

28 FT - BOOM EXTENSION ARM

Page 15

28 FT - BOOM EXTENSION ARM

Continued... ITEM PART NO. QTY. DESCRIPTION

1 02966574 2 SPACER 2 02966483 4 TUBE CLAMP 3 02966482 2 HYDRAULIC TUBE 4 02966481 1 HYDRAULIC TUBE, RH 5 02966480 1 HYDRAULIC TUBE, LH 7 02965367 1 CLAMP PLATE 8 02965366 1 SLEEVING W/ EYELETS 9 02965365 1 HOSE, # 4 X 12" LONG 10 02965364 1 HOSE, # 4 X 26" LONG 11 02965363 2 HOSE, # 4 X 100" LONG 12 02965361 2 HOSE, # 6 X 100" LONG 13 02965360 2 HOSE, # 6 X 202" LONG 14 02965359 2 HOSE, # 16 X 98" LONG 15 02965358 2 CARRIAGE BOLT 16 02965357 2 TUBING CLAMP SET 17 02971796 1 CYLINDER ASY, EXTENSION CYL. 18 02959924 2 LOCKNUT 19 02957475 1 SLEEVING, TOP LIFT SECTION 20 02906300 1 SLEEVING, BOTTOM LIFT SECTION 21 02905300 2 HOSE, # 4 X 200" LONG 22 02753400 5 PLATIC TIE

Page 16

28 FT - BOOM LIFT SECTION

Page 17

28 FT - BOOM LIFT SECTION

Continued... ITEM PART NO. QTY. DESCRIPTION

1 02961112 1 LIFT SECTION WLDMNT 2 02958938 1 MAIN PIN WLDMNT 3 02959268 2 BUSHING 4 02957089 1 LOCKWASHER 5 02921700 1 NUT 6 02152800 3 BOLT 7 00002700 12 FLATWASHER 8 00001800 8 LOCKNUT 9 02963154 3 CLAMP, STEEL TUBING 10 02963323 2 COVER WLDMNT, MOUNT BRACKET 11 02026200 1 HOSE CLAMP 12 02959154 1 ELBOW, 45 DEG. 13 02956851 2 ELBOW 14 02961286 2 ADAPTER, STRAIGHT 15 00749946 6 WASHER 16 02960049 1 DIPPER PIN WLDMNT 17 00606000 7 COTTER PIN 18 02960506 2 CAP 19 02959225 1 BUSHING, CONNEX 20 02753400 5 PLASTIC TIE 21 02957475 1 SLEEVING, 69" LONG 22 02906300 1 SLEEVING 23 02222000 1 CYLINDER ASY, DIPPER 24 02962023 1 HOSE, # 4 X 12" LONG 25 02968299 2 HOSE, # 6 X 100" LONG 26 02215700 1 HOSE, # 4 X 190" LONG 27 02968301 2 HOSE, # 4 X 100" LONG 28 02905300 2 HOSE, # 4 X 200" LONG 29 02965360 2 HOSE, # 6 X 202" LONG 30 02968303 1 SLEEVING W/ GROMMETS 31 02968302 2 HOSE, # 16 X 98" LONG 32 02960982 1 TOP FOUR LINKAGE HYD. TUBE 33 02960983 1 TOP FOUR LINKAGE HYD. TUBE 34 00003500 6 GREASE FITTING

Page 18

28 FT - MOTOR ASY (ROTARY HEAD) - PN 02961029

ITEM PART NO. QTY. DESCRIPTION

02961029 - MOTOR ASY, W/ FITTINGS 1 02960696 1 MOTOR ASY, W/O FITTINGS 2 63000500 4 WASHER 3 02788400 2 BOLT 4 00749103 1 SPLIT FLANGE KIT 5 02705100 2 ELBOW 6 02958647 2 HOSE 7 02960951 2 STUD

Page 19

28 FT - MOTOR PARTS (ROTARY HEAD) - PN 02960696

ITEM PART NO. QTY. DESCRIPTION

02960696 - MOTOR ASY. 1 * SEAL KIT 1 SEAL (IN ITEM 21) 2 * SEAL KIT 8 BOLT (IN ITEM 21) 3 * SEAL KIT 8 FLATWASHER (IN ITEM 21) 4 02721000 1 FLANGE 5 * SEAL KIT 1 O-RING (IN ITEM 21) 6 02721500 2 BOTTOM ISOLATION PLATE 7 * SEAL KIT 4 SEALING STRIP (IN ITEM 21) 8 * SEAL KIT 4 END SEPERATOR (IN ITEM 21) 9 * SEAL KIT 2 CENTER SEPERATOR (IN ITEM 21) 10 * SEAL KIT 4 O-RING (IN ITEM 21) 11 * SEAL KIT 4 BACK UP RING (IN ITEM 21) 12 02721300 2 PRESSURE PLATE 13 02961071 1 DRIVE & IDLER GEAR SET 15 02721400 2 TOP ISOLATION PLATE 16 02721700 2 DOWEL PIN 17 NFS 1 BODY 18 02721800 1 SNAP RING 19 02721600 4 STEEL RING 20 * SEAL KIT 1 SEAL (IN ITEM 21) 21 02720000 1 SEAL KIT (ITEMS 1,2,3,5,7,8,9,10,11 & 20)

Page 20

28 FT - SPINDLE ASY (ROTARY HEAD) - PN 02960553C

ITEM PART NO. QTY. DESCRIPTION

02960553C - SPINDLE ASY. COMPLETE 1 02961038 1 GASKET 2 02960562C 1 SPINDLE HOUSING 3 02960561 1 SPINDLE SHAFT 4 02960558 1 BEARING RING 5 02960559 1 SEAL 6 00754627 1 SNAP RING 7 02960557 1 BEARING ASY, CUP & CONE (LOWER) 8 00755628 1 BEARING ASY, CUP & CONE (UPPER) 9 02964269 1 LOCKING WASHER 10 02962030 1 BEARING ADJUSTING NUT 11 00755633 1 PLUG 12 02959860 1 PRESSURE RELIEF PLUG 13 00751731 1 REDUCER

Page 21

THIS PAGE INTENTIONAL LEFT BLANK

Page 22

28 FT - X-FRAME SQ HEAD (PARTS) - PN 02962177

Page 23

28 FT - X-FRAME SQ HEAD (PARTS) - PN 02962177

Continued... ITEM PART NO. QTY. DESCRIPTION

1 02957436 1 SQUARE HEAD WLDMNT 2 02885700 2 REAR FLAP 3 00011100 67 WASHER 4 02035800 42 WASHER 5 00015800 48 NUT 6 00023100 11 BOLT 7 02959952 1 FRONT GUARD WLDMNT 8 02957380 1 SIDE GUARD 9 00059700 4 BOLT 10 02959957 1 FRONT DEFLECTOR FLAP 11 02957496 1 REAR FLAP RETAINER 12 02958644 1 HITCH POST ASY, W/ BUSHING & GREASE FITTING

02958459 1 HITCH POST ONLY

00003500 1 GREASE FITTING ONLY

02958424 1 BUSHING ONLY 13 02892100 6 BOLT 14 00037200 6 NUT 15 00023100 13 BOLT 16 02958856 1 FLAP GUARD 17 00007000 19 BOLT

5710121 1 COVER PLATE (NOT SHOWN)

5F5180 2 WINGNUT (F/ COVER PLATE) 18 02959955 1 HEAD GUARD ASY. (ITEMS 5,7,15 & 16) 19 02959958 1 DEBRIS DEFLECTOR, (USE WHEN ITEM 7 IS REMOVED) 20 02959959 1 DEBRIS DEFLECTOR, (USE WHEN ITEM 7 IS REMOVED)

Page 24

28 FT - X-FRAME SQ HEAD ASY - PN 02962177

ITEM PART NO. QTY. DESCRIPTION

1 02957331 1 SKID SHOE, RH 41-1/2" LONG 2 02957332 1 SKID SHOE, LH 61-1/2" LONG 3 00059700 7 BOLT 4 00011100 7 FLATWASHER 5 00015800 7 NUT 6 02960920 1 MOTOR AND SPINDLE HOUSING ASY.

02960553C 1 SPINDLE ASY ONLY 7 02959390 6 BOLT 8 00003901 6 LOCKWASHER 9 00037200 6 NUT 10 02957357 1 BLADE BAR ASY. (ITEMS 13 THRU 19) 11 02708700 4 BOLT 12 00003901 4 LOCKWASHER 13 02957347 2 BLADE BUSHING 14 00748547 4 WASHER 15 02957342 1 BLADE BAR 16 00749005 2 BLADE BOLT 17 02030300 2 BLADE NUT 19 00127028 2 BLADE 20 02960951 2 STUD 21 02788400 2 BOLT 22 00001800 4 NUT 23 63000500 2 WASHER

Page 25

50 IN - X-FRAME BLADE CARRIER ASY (DUAL BAR) - PN 02962721

ITEM PART NO. QTY. DESCRIPTION

02962721 - BLADE CARRIER ASY, BAR W/ ITEMS 1 THRU 11 ONLY 1 02962636 1 BAR BLADE, TOP LEAF 3 02962637 1 BAR BLADE, BOTTOM LEAF 4 02962634 1 BLADE MATCHED SET, (2 BLADES) 5 02782900 2 BLADE BOLT 6 00020900 2 SLOTTED NUT 7 02957089 2 LOCKWASHER 8 00023200 2 ROLL PIN 9 02782200 2 BOLT, SPECIAL 11 02032200 2 LOCKWASHER 12 02961298 4 BOLT, SOCKET HEAD 13 00003901 4 LOCKWASHER, HEAVY 14 02984572 1 BLADE BOLTS, NUTS, ROLLPIN KIT, (2 EA OF ITEMS 5, 6 & 8)

Page 26

50 IN - X-FRAME BLADE CARRIER ASY (PAN) - PN 02964457

ITEM PART NO. QTY. DESCRIPTION

02964457 - THREE BLADE PAN ASY (W/ 3 BLADE SET) , W/ ITEMS 1 THRU 10 1 02964804 - PAN & SPYDER ASY W/ ITEMS 7,8,9 & 10 2 02962634 1 BLADE, MATCHED SET, (2) OPTIONAL (NOT INCLUDED IN ASY)

02962722 1 BLADE, MATCHED SET (3) STANDARD 3 02964330 3 BLADE BOLT, KEYED 4 00755623 3 WASHER 5 00023200 3 ROLL PIN 6 00020900 3 SLOTTED NUT, HEAVY 7 02030300 - LOCKNUT (1 IN EACH HOLE W/O BLADE) 8 00748547 - FLATWASHER (2 IN EACH HOLE W/O BLADE) 9 02964162 - SPACER (1 IN EACH HOLE W/O BLADE) 10 7A16824 - BOLT (1 IN EACH HOLE W/O BLADE) 11 00003901 4 LOCKWASHER, HEAVY 12 02886600 4 BOLT, SOCKET HEAD 13 02964954 3 KEY 14 02964161 3 BUSHING, KEYED F/ BLADE BOLT 15 02965229 3 FLAT WASHER, SPECIAL

Page 27

50 IN - X-FRAME BLADE CARRIER ASY (SINGLE BAR) - PN 02971745

ITEM PART NO. QTY. DESCRIPTION

02971745 - BLADE BAR ASY, SINGLE BAR W/ ITEMS 1 THRU 5 1 02970195 1 BLADE BAR WLDMNT 2 02966262 1 BLADE, MATCHED SET (2 BLADE SET) 3 8227 2 BLADE BOLT, SQ SHOULDER 4 9216 2 FLATWASHER, 5 5JRC16140 2 LOCKNUT

Page 28

50 IN - X-FRAME SQ HEAD ASY

Page 29

50 IN - X-FRAME SQ HEAD ASY

Continued... ITEM PART NO. QTY. DESCRIPTION

02974681 - SQ HD ASY. W/ DUAL BLADE BAR & W/RND DOOR

02974861 - SQ HD ASY. W/ DUAL BLADE BAR (GRASS BLADES) & W/RND DOOR

02974680 - SQ HD ASY. W/ PAN BLADE CARRIER & W/RND DOOR 1 02974664 1 SQUARE HEAD WLDMNT, 50" 2 02958459 1 HITCH POST, 4 / BAR

00003500 1 GREASE FITTING, STRAIGHT

02958424 1 BUSHING 3 02892100 6 BOLT 4 00037200 12 LOCKNUT 5 02962272 1 MOTOR & SPINDLE ASY. 6 02973438 6 BOLT 7 02972723 1 BAR DOOR LOCK WLDMNT 8 02972726 1 PIN WELDMENT 9 2196 1 CLIP (LYNCH PIN) 10 5710121 1 COVER PLATE 11 5F5180 2 WING NUT 12 02974483 1 ROUND DOOR WLDMNT, 50" SQ HEAD 13 02845600 1 BOLT 14 00695100 1 LOCKNUT 15 02975227 3 FLAP, 50" DOOR (SQUARE FLAP) 16 02975228 1 FLAP, 50" DOOR (TRIANGLE END) 17 00753642 14 BOLT 18 00011100 50 FLATWASHER 19 00015800 34 LOCKNUT 20 02885700 2 REAR FLAP 21 02957380 1 SIDE GUARD 22 02957496 1 REAR FLAP RETAINER 23 00023100 19 BOLT 24 02035800 25 WOOD WASHER 25 02962721 1 BLADE CARRIER, ASY, BAR W/ DUAL BAR 26 02971745 1 BLADE CARRIER, ASY, BAR W/ SINGLE BAR (GRASS BLADE) 27 02964457 1 BLADE CARRIER, ASY, ROUND PAN

Page 30

50 IN - X-FRAME SQ HEAD MOTOR (PARTS)

ITEM PART NO. QTY. DESCRIPTION

02962112 - HYD. MOTOR ASY, CAST IRON HSG. & SPLINED SHAFT 1 02961933 1 SNAP RING 2 * 1 O-RING (SEE ITEM 19 & 20) 3 02961932 1 RETAINER SEAL 4 * 2 SEAL (SEE ITEM 19 & 20) 5 02961926 1 MOUNTING FLANGE 6 02961940 1 PLUG HEX SKT HD 7 02961931 2 CHECK ASY.

Page 31

50 IN - X-FRAME SQ HEAD MOTOR (PARTS)

Continued... ITEM PART NO. QTY. DESCRIPTION

8 * 4 SEAL END (SEE ITEM 19 & 20) 9 * 2 THRUST PLATES (SEE ITEM 20) 10 02962287 1 KIT GEAR SET 11 * 2 SQUARE SEAL (SEE ITEM 19 & 20) 12 02961924 4 PINS-DOWEL 13 02962288 1 HOUSING GEAR 14 02961927 1 PORTING FLANGE 15 02961917 4 WASHER 16 02962289 4 BOLT 17 * 4 SIADE SEAL, NOT SHOWN (SEE ITEM 19 & 20) 18 02962286 1 RETAINER SEAL 19 02962538 - SEAL KIT, MINOR REBUILD KIT (ITEMS 2,4,8,11,17) 20 02961939 - SEAL KIT, MAJOR REBUILD (ITEMS 2,4,8,9,11,17)

Page 32

50 IN - X-FRAME SQ HEAD MOTOR ASY W- FITTINGS

ITEM PART NO. QTY. DESCRIPTION

1 02962112 1 HYD. MOTOR ASY. W/ CAST IRON HSG & SPLINED SHAFT 2 02962774 2 ADAPTER, HYD ELBOW 3 00749101 2 SPLIT FLANGE KIT 4 02044200 2 O-RING

Page 33

THIS PAGE INTENTIONAL LEFT BLANK

Page 34

60 IN - SQ HEAD ASY (BOOM-AXE)

ITEM PART NO. QTY. DESCRIPTION

02974676 - 60 " X-FRAME SQ. HD. ASY . BOOM AXE 1 02974674A 1 DECK WLDMNT, 60" SQ. HD. 2 02958459 1 HITCH POST, 4 BAR

00003500 1 GREASE FITTING

02958424 1 BUSHING 3 02892100 6 BOLT 4 00037200 12 LOCKNUT 5 02962272 1 MOTOR ASY. 6 02973438 6 BOLT 7 02972723 1 DOOR LOCK 8 02972726 1 PIN 9 2196 1 CLIP PIN 10 5710121 1 COVER PLATE 11 5F5180 2 WINGNUT 12 02973857A 1 DOOR WLDMNT 13 02845600 1 BOLT 14 00695100 1 NUT 15 02975229 3 FLAP DEFLECTOR, DOOR 16 02975230 1 FLAP DEFLECTOR, DOOR

Page 35

60 IN - SQ HEAD ASY (BOOM-AXE)

Continued... ITEM PART NO. QTY. DESCRIPTION

17 00753642 14 BOLT 18 00011100 50 FLATWASHER 19 00015800 34 LOCKNUT 20 02885700 2 FLAP DEFLECTOR, REAR 21 02957380 1 SIDE GUARD 22 02957496 1 REAR FLAP RETAINER 23 00023100 19 BOLT 24 02035800 25 WOODWASHER

Page 36

60 IN - SQ HEAD MOTOR (PARTS)

Page 37

60 IN - SQ HEAD MOTOR (PARTS)

Continued... ITEM PART NO. QTY. DESCRIPTION

1 02961933 1 SNAP RING 2 * 1 O-RING (IN ITEM 18 & 19) 3 02961932 1 SEAL RETAINER, (F/ 02961237 OR 02962112 MOTOR) 3A 02962286 1 SEAL RETAINER, (F/ 02962112 MOTOR ONLY) 4 * 2 SEAL (IN ITEM 18 & 19) 5 02961926 1 MOUNTING FLANGE W/ BUSHINGS 6 02961940 1 PLUG 7 02961931 2 CHECK ASY. 8 * 2 SEAL END (IN ITEM 18 & 19) 9 * 2 THRUST PLATES (IN ITEM 19 ONLY) 10 02962287 1 GEAR SET, (F/ MOTOR 02962112)

02961929 1 GEAR SET, (F/ MOTOR 02961732) 11 * 2 SQUARE SEAL (IN ITEM 18 & 19) 12 02961924 4 DOWEL PIN 13 02962288 1 GEAR HOUSING, (F/ MOTOR 02962112)

02961928 1 GEAR HOUSING, (F/ MOTOR 02961732) 14 02961927 1 PORTING FLANGE W/ BUSHING 15 02961917 4 WASHER 16 02961918 4 BOLT, (F/ MOTOR 02961732)

02962289 4 BOLT, (F/ MOTOR 02962112) 17 * 4 SIDE SEAL (IN ITEM 18 & 19) 18 02961938 - MINOR SEAL KIT (ITEMS 2,4,8,11 & 17) 19 02962639 - MAJOR SEAL KIT (ITEM 2,4,8,9,11,17,& 18)

Page 38

60 IN - SQ HEAD MOTOR ASY

ITEM PART NO. QTY. DESCRIPTION

1 02962112 1 MOTOR ASY, HIGH SPEED (S/N 03250 - 03400 & 03501 & ABOVE)

02961732 1 MOTOR ASY. (S/N 03259 AND PRIOR & 03401 - 03500) 2 02962774 2 ELBOW 3 00749101 2 SPLIT FLANGE KIT 4 02044200 2 O-RING

Page 39

THIS PAGE INTENTIONAL LEFT BLANK

Page 40

60 IN - SQ HEAD SPINDLE - MOTOR & BLADE BAR

ITEM PART NO. QTY. DESCRIPTION

1 02962272 1 SPINDLE & MOTOR ASY. W/ FITTINGS (HIGH SPEED) S/N 03260 & 03501 & ABOVE

02960553B 1 SPINDLE HSG & SPINDLE ASY.

02962112 1 MOTOR (HIGH SPEED) S/N 03260 -03400 & 03501 - ABOVE

02961732 1 MOTOR ASY, S/N 03259 - BELOW & 03401 - 03500 5 02782300 1 BLADE BAR ASY, (ITEM 19 THRU 29) 6 02782000 4 BOLT, (TORQUE TO 400 FT. LBS.) 7 00003901 4 NUT 8 02957331 1 SKID SHOE, RH (41-1/2" LONG) 9 02957332 1 SKID SHOE, LH (61-1/2" LONG) 10 00059700 7 BOLT 11 00015800 7 LOCKNUT 12 00011100 7 WASHER 13 02892000 4 BOLT 19 02781600 1 TOP LEAF 20 02781700 1 MIDDLE LEAF 21 02781800 1 BOTTOM LEAF 22 02761500 1 BLADE SET 23 02782900 2 BLADE BOLT

Page 41

60 IN - SQ HEAD SPINDLE - MOTOR & BLADE BAR

Continued... ITEM PART NO. QTY. DESCRIPTION

24 00020900 2 NUT, SLOTTED 25 02957089 2 LOCKWASHER 26 00023200 2 ROLL PIN 27 02782100 2 BOLT 28 02782200 2 BOLT 29 02032200 4 LOCKWASHER 30 02961038 1 GASKET 31 02984572 1 BLADE BOLTS, NUTS, ROLLPIN KIT (INCLUDES 2 EACH OF ITEMS 23, 24, & 26)

Page 42

60 IN - SQ HEAD SPINDLE ASY

ITEM PART NO. QTY. DESCRIPTION

02960553B - SPINDLE ASY, (ITEMS 1 THRU 10) 1 02963815 1 HOUSING 2 02960561 1 SPINDLE SHAFT 3 02960558 1 BEARING RING, LOWER 4 02960559 1 SEAL 5 00754627 1 SNAP RING 6 02960557 1 BEARING ASY, CUP & CONE 7 00769938 1 BEARING ASY, CUP & CONE 8 02962030 1 BEARING ADJUSTING NUT 9 02979570 1 GREASE RELIEF FITTING 10 00003500 1 GREASE FITTING

Page 43

THIS PAGE INTENTIONAL LEFT BLANK

Page 44

ARTICULATED ARM ASY - (17 FT) (PART 1)

Page 45

ARTICULATED ARM ASY - (17 FT) (PART 1)

Continued... ITEM PART NO. QTY. DESCRIPTION

1 00007000 3 BOLT 2 00011100 3 FLATWASHER 4 00015800 3 LOCKNUT 6 00037200 1 LOCKNUT 7 00606000 1 COTTER PIN 8 00748000 1 LOCKWASHER 9 00749946 1 WASHER 10 02030300 1 LOCKNUT 11 02957089 1 LOCKWASHER 12 02906300 1 SLEEVING 13 02921700 1 NUT 14 02956972 1 BOLT 15 02957501 1 BUSHING 16 02957969 2 GROMMET 17 02958716C 1 LINKAGE ARM ASY. W/ CONNEX BRG # 02958357 18 02959084 1 CYLINDER GUARD ASY. 19 02959198 1 HOSE 20 02959199 1 HOSE 21 02959200 1 HOSE 22 02960406 2 ELBOW 23 02960411 2 ELBOW 24 02960869 2 TUBE CLAMP 25 02961070 1 TUBE, LOWER 26 02961072 1 TUBE, UPPER 27 02961085 1 SLEEVING 28 02961103 2 ADAPTER 29 02961129 1 DIPPER SECTION WLDMNT, 17 FT. 30 02961130 2 TUBE, DIPPER 31 02961132 1 LIFT SECTION WLDMNT, 17 FT. 32 02961520 2 HOSE 33 02962023 1 HOSE 34 02965538 1 MAIN PIN 37 02966756 1 PIN, CYLINDER 38 02966757 1 PIN, LINKAGE ARM 39 02958591 1 PIN, DIPPER 40 02960841 2 BEARING 41 02966935 1 PIN, TILT CYLINDER 42 02969980 1 PIN, DIPPER CYLINDER 43 02966964 1 PIN 44 02967008 3 SPACER 45 02967013 1 PIN

Page 46

ARTICULATED ARM ASY - (17 FT) (PART 2)

Page 47

ARTICULATED ARM ASY - (17 FT) (PART 2)

Continued... ITEM PART NO. QTY. DESCRIPTION

46 02967016 1 CYLINDER ASY, TILT CYL. 47 02967017 1 CYLINDER ASY, DIPPER CYL. 48 02967021 1 LINKAGE ARM 49 02967246 1 SETSCREW 50 03100099 1 WASHER 51 02966443 1 BUSHING 52 02960842 2 BUSHING 53 02965214 2 BEARING 54 02044900 4 BOLT 55 02957501 1 BEARING 56 02962297 1 CYLINDER ASY, LIFT CYL. 57 02905100 1 HOSE 58 -------------- 1 KING POST, (SEE KING POST SECTION) 59 00750479 1 BOLT 60 02030300 2 NUT 61 02961054 2 HOSE 62 02905000 1 HOSE 63 -------------- 1 BUSHING (SEE KING POST SECTION) 64 00755076 1 BOLT 65 02959891 2 BUSHING

Page 48

ARTICULATED ARM ASY - (20-23 FT) (PART 1)

Page 49

ARTICULATED ARM ASY - (20-23 FT) (PART 1)

Continued... ITEM PART NO. QTY. DESCRIPTION

02961820A 1 ARTICULATED ARM ASY. (20 FT MODEL)

02961823A 1 ARTICULATED ARM ASY. (23 FT. MODEL) 1 00001800 3 LOCKNUT 2 00002700 5 FLATWASHER 3 00007000 3 BOLT 4 00011100 3 FLATWASHER 6 00015800 3 LOCKNUT 8 00037200 1 LOCKNUT 9 00605600 3 BOLT 10 00606000 1 COTTER PIN 11 00748000 1 LOCKWASHER 12 00749946 4 WASHER 13 00751838 1 SLEEVING 14 02030300 3 NUT 15 02957089 1 LOCKWASHER 16 02905200 1 HOSE

02905300 1 HOSE 17 02905300 1 HOSE, (F/ 20 FT. MODEL)

02956911 1 HOSE, (F/ 23 FT. MODEL) 18 02906300 1 SLEEVING 19 02921700 1 NUT 20 02956972 1 BOLT 21 02957468 1 HOSE, (20 FT. MODEL)

02957467 1 HOSE, (23 FT. MODEL) 22 02957969 2 GROMMET 23 02958716C 1 LINKAGE ARM ASY. 24 02959066 1 HOSE, (20 FT. MODEL)

02959177 1 HOSE, (23 FT. MODEL) 25 02959067 1 HOSE, (20 FT. MODEL)

02959178 1 HOSE, (23 FT. MODEL) 26 02959084 1 CYLINDER GUARD ASY. 27 02959225 1 BUSHING 28 02960406 2 ELBOW 29 02960838 1 LARGE BOOM WLDMNT, (20 FT. MODEL)

02961082 1 LARGE BOOM WLDMNT, (23 FT. MODEL) 30 02960869 1 TUBE CLAMP 31 02960984 1 TUBE, LOWER (20 FT. MODEL)

02960982 1 TUBE, LOWER (23 FT. MODEL) 32 02960985 1 TUBE, UPPER (20 FT. MODEL)

02960983 1 TUBE, UPPER (23 FT. MODEL) 33 02960987 1 TUBE, DIPPER SECTION (20 FT. MODEL)

Page 50

ARTICULATED ARM ASY - (20-23 FT) (PART 2)

Page 51

ARTICULATED ARM ASY - (20-23 FT) (PART 2)

Continued... ITEM PART NO. QTY. DESCRIPTION

02960991 1 TUBE, DIPPER SECTION (23 FT. MODEL) 34 02960988 1 TUBE, DIPPER SECTION (20 FT. MODEL)

02960992 1 TUBE, DIPPER SECTION (23 FT. MODEL) 35 02961054 4 HOSE 36 02961067 1 COVER, HYDRAULIC TUBING 37 02961081 1 DIPPER SECTION WLDMNT (20 FT. MODEL)

02961084 1 DIPPER SECTION WLDMNT (23 FT. MODEL) 38 02961085 1 SLEEVING 39 02961780 1 CYLINDER ASY, DIPPER CYL. 40 02963154 3 CLAMP 41 02963323 3 BRACKET, TOP 42 00750479 2 BOLT 43 02965538 1 MAIN PIN 46 02966756 1 PIN, CYLINDER 47 02966757 1 PIN, LINKAGE ARM 48 02958591 1 PIN, DIPPER 49 02960841 1 BEARING 50 02966935 1 PIN, TILT CYL. 51 02969980 1 PIN, DIPPER CYL. 52 02966964 1 PIN 53 02967008 3 SPACER 54 02967013 1 PIN 55 02967016 1 CYLINDER ASY, TILT CYL. 56 02967021 1 LINKAGE ARM 58 03100099 1 WASHER 59 02960842 2 BUSHING 60 02905100 1 HOSE 61 02905000 1 HOSE 62 ----------- 1 KING POST (SEE KING POST SECTION) 63 ----------- 1 MAIN PIN BUSHING (SEE KING POST SECTION) 64 02961779 1 LIFT CYLINDER ASSY-20-28 A/B 65 02921700 1 JAMNUT 66 02960650 4 BUSHING 67 02966792 2 BUSHING 68 00752405 1 BOLT 69 02965214 2 BEARING 70 02966792 2 BEARING 71 02959891 2 BUSHING 72 02966443 1 BUSHING

Page 52

BUZZ BAR - HYD MOTOR (PARTS) - PN 02975175

ITEM PART NO. QTY. DESCRIPTION

02975175 - MOTOR ASY, GEAR TYPE 3.94 CIR 1 02962210 1 SNAP RING 2 02964940 1 SPACER 3 02976771 1 RETAINER SEAL 4 * 1 SEAL (IN ITEM 19 & 20) 5 02964704 1 FLANGE, MOUNTING 6 02961940 1 PLUG, HEX SOCKET HEAD 7 02961931 2 CHECK ASY. 8 * 4 SEAL END (IN ITEM 19 & 20)

Page 53

BUZZ BAR - HYD MOTOR (PARTS) - PN 02975175

Continued... ITEM PART NO. QTY. DESCRIPTION

9 * 2 THRUST PLATE (IN ITEM 20 ONLY ) 10 02964937 1 GEAR & SHAFT SET 11 * 2 SQUARE SEAL, (IN ITEM 19 & 20) 12 02961924 4 DOWEL PIN 13 02962205 1 GEAR HOUSING 14 02976773 1 PORTING FLANGE 15 02961917 4 WASHER 16 02962208 4 BOLT 17 * 4 SIDE SEAL, NOT SHOWN (IN ITEM 19 & 20) 18 02964956 1 KEY 19 02964938 - SEAL KIT, MINOR (ITEMS 4,8,11 & 17) 20 02964939 - SEAL KIT, MAJOR (ITEMS 4,8,9,11 & 17)

Page 54

BUZZ BAR HEAD ASY 48 IN - SN 01307 (11-01) & UP (PAGE 1)

Page 55

BUZZ BAR HEAD ASY 48 IN - SN 01307 (11-01) & UP (PAGE 1)

Continued... ITEM PART NO. QTY. DESCRIPTION

02979266 - SAW BLADE HEAD ASY, 2 BLADE 48" (EXCEPT 28 FT A-BOOM)

02979268 - SAW BLADE HEAD ASY, 2 BLADE 48" (28 FT A-BOOM ONLY) 1 02974237 2 END CAP 2 02974238 1 BLADE SPACER 3 02974235 1 HUB ASSEMBLY 4 02974659 4 SHCS 1/2 NC 3-1/2 W/ HOLE 5 02974658 4 SHCS 1/2 NC 2 W/ HOLE 6 02976017 8 SLOT NUT 7 00001200 2 HEXNUT1/2 NC 8 02983631 1 WLDMT, 2 BLADE SAW BODY 9 02974225 1 TENSION ADJUST BRACKET 10 00750614 8 NUT 1/2 NF 11 002521 1 HHCS 1/2 NC 3-1/2, FULL THREAD 12 02974241 1 BELT, MICRO-V 13 02974239 2 SHEAVE 14 02974240 2 QD BUSHING 15 02979271 1 BELTCOVER, LEFT 2 BLADE 16 02984678 7 STUD 9MM 1/4 TURN 18 02984677 7 SLIP ON RECEPTACLE 9MM 19 00011400 1 HHCS 3/8 NC 1 20 00011100 10 FLATWASHER 3/8 21 00001800 2 LOCKNUT 1/2 NC 22 02978249 1 DRIVE HUB ASSEMBLY 23 02975175 11 MOTOR, GEAR 24 00749130 2 HHCS 1/2 NC 1-3/4 25 02978267 1 HUB, 20 R 10 W/1 - 1/8 BORE 26 02978268 1 INSERT, URETHANE 20 R 10 COUPLER 27 02978269 1 COVER,NYLON 20 R 10 COUPLER 28 02978266 1 HUB, 20R10 W/ 1" BORE 29 02979296 1 BELT COVER, SHORT 30 02970302 1 HITCH POST A-BOOM FLAILAXE 31 00037200 7 LOCKNUT 3/4 NC 32 02970324 1 CLAMP 33 02918600 6 HHCS 3/4 NC 2 GR8 35 00015800 9 LOCKNUT 3/8 NC 36 00023100 8 HHCS 3/8 NC 1-1/2 37 02974207 1 BUMPER 38 02979275 1 WLDMT, REAR SHIELD 2 BLADE (28 FT A-BOOM ONLY)

02979274 1 WLDMT, REAR SHIELD 2 BLADE (EXCEPT 28 FT A-BOOM) 39 02975600 2 SAW BLADE 2 - PACK (SHIP UNMOUNTED) 40 02754100 2 ADP, HYD 20FL-16MJ-90 (28 FT A-BOOM ONLY)

Page 56

BUZZ BAR HEAD ASY 48 IN - SN 01307 (11-01) & UP (PAGE 2)

Page 57

BUZZ BAR HEAD ASY 48 IN - SN 01307 (11-01) & UP (PAGE 2)

Continued... ITEM PART NO. QTY. DESCRIPTION

02961280 2 ADP, HYD 20FL-20MJ-90 (EXCEPT 28 FT A-BOOM) 41 00749103 2 #20 SPLIT FLANGE KIT (28 FT A-BOOM ONLY)

00749103 2 #20 SPLIT FLANGE KIT (EXCEPT 28 FT A-BOOM) 42 02959154 1 ADP, HYD 16MJ-16FJX-45 (28 FT A-BOOM ONLY)

02960411 1 ADP, HYD 20FJX-20MJ-45 (EXCEPT 28 FT A-BOOM) 43 00024100 4 FLATWASHER 1/4 PL 44 10074000 4 HHCS 1/4 NC3 45 00760886 1 MANIFOLD BLOCK 46 00761699 2 O-RING 47 00751790 1 RELIEF CARTRIDGE 48 02751300 1 HOSE# 16 16FJX-16FJX-68LG (28 FT A-BOOM ONLY)

02973124 1 HOSE# 20 20FJX-20FJX-68LG (EXCEPT 28 FT A-BOOM) 49 02215500 1 HOSE# 16 16FJX-16FJX90-84LG (28 FT A-BOOM ONLY)

02973125 1 HOSE# 20 20FJX-20FJX90-82LG (EXCEPT 28 FT A-BOOM) 50 02961085 1 CORDURA SLEEVE 51 00758194 1 WARNING V-BELT PINCH 52 00769736 1 WARNING USE/REPAIR SHIELDS 53 00769737 1 DANGER CUTTING BLADES... 54 02925100 1 CAUTION GENUINE PARTS 55 02958241 1 DANGER OPERATOR SAFETY 56 02962764 1 DANGER PINCH POINT 57 00756004 1 DANGER GUARD MISSING 58 02965262 1 DANGER LEAK / HOSE BURST 59 02967827 1 DANGER MULTIHAZARD ROTARY 60 00757139 1 ALAMO BY TERRAIN KING (28 FT A-BOOM ONLY)

02960766 1 ALAMO LOGO 4.5 X 4.5 (EXCEPT 28 FT A-BOOM) 61 02974998 1 LOGO BUZZBAR 62 D138 1 DECAL BLADE ROTATION 63 02975158 1 WARNING HEARING PROTECTION 64 02975170 1 DANGER FOOT/LEG CONTACT 65 02975515 1 WARNING DISCONNECT SOLENOID 66 02975516 1 CAUTION NO HITCH POST HERE 68 02975513 1 SERIAL PLATE 69 3710151 4 METAL TACK 70 02956851 1 ADP HYD 16MJ-16FJX90 (28 FT A-BOOM ONLY)

02960407 1 ADP HYD 20MJ-20FJX90 (EXCEPT 28 FT A-BOOM) 71 1458392 1 REFLECTOR RED 72 1458393 1 REFLECTOR YELLOW 74 00003500 1 GREASE FITTING 75 02030300 1 LOCKNUT 1 NC

Page 58

BUZZ BAR HEAD ASY 48 IN - SN 01307 (11-01) & UP (PAGE 3)

Page 59

BUZZ BAR HEAD ASY 48 IN - SN 01307 (11-01) & UP (PAGE 3)

Continued... ITEM PART NO. QTY. DESCRIPTION

76 02958424 1 BUSHING 77 02956972 1 HHCS 1 X 9 NC 78 00752405 1 BOLT 3/4 NC 79 02669600 3 KEY 1/4 SQUARE 80 02961940 1 PLUG 81 02961134 1 DECAL 82 02975931 1 INSERT SHEET (28 FT A-BOOM ONLY)

02975929 1 INSERT SHEET (EXCEPT 28 FT A-BOOM) 84 02968894 1 RED TIE 85 40010000 8 COTTER KEY (SHIP UNMOUNTED) 86 63000500 8 WASHER (SHIP UNMOUNTED) 87 02979262 1 MACHINED TUBE, MOTOR MOUNT

Page 60

BUZZ BAR HEAD ASY 69 IN - SN 01307 (11-01) & UP (PART 1)

Page 61

BUZZ BAR HEAD ASY 69 IN - SN 01307 (11-01) & UP (PART 1)

Continued... ITEM PART NO. QTY. DESCRIPTION

02979250 1 SAW BLADE HEAD ASY, 3 BLADE 69" (EXCEPT 28 FT A-BOOM)

02979252 2 SAW BLADE HEAD ASY, 3 BLADE 69" (28 FT A-BOOM ONLY) 1 02974237 3 END CAP 2 02974238 1 BLADE SPACER 3 02974235 2 SPINDLE ASY. 4 02974659 4 BOLT, SCKT HD CNTR-SNK 1/2"-NC X 3-1/2" W/HOLE 5 02974658 8 BOLT, SCKT HD CNTR-SNK 1/2"-NC X 2" W/HOLE 6 02976017 12 NUT, SLOTTED 1/2"-NC PLB 7 00001200 4 NUT, HEX 1/2"-NC PL 8 02979253 1 SAW BODY WELDMENT, 3 BLADE 9 02974225 2 TENSION ADJUSTMENT BRACKET 10 00750614 12 NUT, 1/2"-20NF 90DEG CONE LUG PL 11 002521 2 BOLT, HEX HEAD 1/2"-NC X 3-1/2" PL GR5 12 02974241 2 V-BELT 13 02974239 3 SHEAVE W/GROOVE 14 02974240 3 BUSHING, QD 15 02979255 1 SHEET, BELT COVER, LEFT 3 BLADE 16 02975441 8 STUD, QUICK RELEASE W/RING 17 02975440 8 RETAINER F/QUICK RELEASE 18 02975439 8 RECEIVER F/ QUICK RELEASE 19 00011400 1 BOLT, HEX HEAD 3/8"-NC X 1 PL GR5 20 00011100 10 FLATWASHER, 3/8" PL STD 21 00001800 6 LOCKNUT, TOPLOCK 1/2"-NC PLB 22 02978249 1 DRIVE SPINDLE ASY. 23 02975175 1 MOTOR, GEAR TYPE 24 00749130 8 BOLT, HEX HEAD 1/2"-13NC X 1-3/4" PL GR5 25 02978267 1 HUB, 1-1/8" BORE X 1/4" KEY 26 02978268 1 INSERT, URETHANE 27 02978269 1 COVER, PROTECTIVE NYLON 28 02978266 1 HUB, 1" BORE 29 02979296 1 BELT COVER, SHORT 30 02970302 1 HITCH POST WELDMENT 31 00037200 6 LOCKNUT, TOPLOCK 3/4"-NC PLC 32 02970324 1 PLATE, HITCH POST CLAMP 33 02918600 6 BOLT, HEX HEAD 3/4"-10NC X 2" PL GR8 34 02979256 1 HITCH TUBE WELDMENT, 3 BLADE 35 00015800 9 LOCKNUT, TOPLOCK 3/8"-NC PLB 36 00023100 8 BOLT, HEX HEAD 3/8"-16NC X 1-1/2" PL GR5 37 02974207 1 BUMPER 38 02979258 1 SHIELD WELDMENT, REAR 39 02975600 1 SAW BLADE PACKAGE OF 2

Page 62

BUZZ BAR HEAD ASY 69 IN - SN 01307 (11-01) & UP (PART 2)

Page 63

BUZZ BAR HEAD ASY 69 IN - SN 01307 (11-01) & UP (PART 2)

Continued... ITEM PART NO. QTY. DESCRIPTION

40 02961280 2 ADAPTER, HYD 20FL-20MJ90 (EXCEPT 28 FT A-BOOM)

02754100 2 ADAPTER, HYD 20FL-16MJ90 (28 FT A-BOOM ONLY) 41 00749103 2 SPLIT FLANGE KIT, #20 42 02960411 1 ADAPTER, HYD 20FJX-20MJ45 (EXCEPT 28 FT A-BOOM)

02959154 2 ADAPTER, HYD 16MJ-16FJX45 (28 FT A-BOOM ONLY) 43 00024100 4 FLATWASHER, 1/4" 44 10074000 4 BOLT, HEX HEAD 1/4" X 3 45 00760886 1 MANIFOLD BLOCK 46 00761699 2 O-RING 47 00751790 1 RELIEF CARTRIDGE 48 02973124 1 HOSE, #20-20FJX-20FJX-68"LG (EXCEPT 28 FT A-BOOM)

02751300 1 HOSE, #16-16FJX-16FJX- 68"LG (28 FT A-BOOM ONLY) 49 02973125 1 HOSE, #20-20FJX-20FJX-82"LG (EXCEPT 28 FT A-BOOM)

02215500 1 HOSE, #16-16FJX-16FJX90-84"LG (28 FT A-BOOM ONLY) 50 02961085 1 CORDURA SLEEVE 51 00758194 1 DECAL, WARNING BELT SHIELD 52 00769736 1 DECAL, USE/REPAIR GUARDS 53 00769737 1 DECAL, BLADES THROWN OBJECTS 54 02925100 1 DECAL, REPLACE PARTS 55 02958241 1 DECAL, TRACTOR OPERATOR SAFETY 56 02962764 1 DECAL, PINCH POINTS 57 00756004 1 DECAL, SHIELD MISSING 58 02965262 1 DECAL, WARNING HOSE BURST 59 02967827 1 DECAL-MULTI HAZ 60 02960766 2 DECAL, ALAMO INDUSTRIAL LOGO 61 02974998 1 DECAL, BUZZBAR 62 D138 1 DECAL, BLADE ROTATION 63 02975158 1 DECAL, HEAR PROTECTION REQD 64 02975170 1 DECAL, ROTATING BLADES 65 02975515 1 DECAL, WARNING DISCONNECT 66 02975516 1 DECAL, NO HITCH POST HERE 68 ---NFS----- - SERIAL NUMBER PLATE BB90 69 ---NFS----- - METAL TACK 70 02960407 1 ADAPTER, HYD 20MJ-20FJX90 (EXCEPT 28 FT A-BOOM)

02956851 1 ADAPTER, HYD 16MJ-16FJX90 (28 FT A-BOOM ONLY) 71 1458392 1 DECAL, RED REFLECTOR 72 1458393 1 DECAL, YELLOW REFLECTOR 74 00003500 1 GREASE FITTING 75 02030300 1 NUT, 1"-NC 76 02958424 1 BUSHING

Page 64

BUZZ BAR HEAD ASY 69 IN - SN 01307 (11-01) & UP (PART 3)

Page 65

BUZZ BAR HEAD ASY 69 IN - SN 01307 (11-01) & UP (PART 3)

Continued... ITEM PART NO. QTY. DESCRIPTION

77 02956972 1 BOLT, HEX HEAD 1"-NC X 9" 78 00752405 1 BOLT, HEX HEAD 3/4"-NC 79 02969600 4 KEY, 1/4" SQ KEY X 1-1/4" LG 80 02961940 1 PLUG 81 02961134 1 DECAL, PATENT PENDING 82 02975929 1 INSERT SHEET, BUZZBAR (EXCEPT 28 FT A-BOOM)

02975931 1 INSERT SHEET, BUZZBAR (28 FT A-BOOM ONLY) 83 02968896 1 PLASTIC TIE, ORANGE 84 02968894 1 PLASTIC TIE, RED 85 40010000 12 COTTER PIN, 1/8" X 1" 86 63000500 12 WASHER, PLATED 87 02979262 1 MOTOR MOUNT TUBE, MACHINED

Page 66

BUZZ BAR HEAD ASY 90 IN - SN 01306 (10-31) & DOWN (PART 1)

Page 67

BUZZ BAR HEAD ASY 90 IN - SN 01306 (10-31) & DOWN (PART 1)

Continued... ITEM PART NO. QTY. DESCRIPTION

02974204 1 BUZZ BAR HEAD ASY, 4 BLADE 90" (EXCEPT 28 FT A-BOOM)

02974219 1 BUZZ BAR HEAD ASY, 4 BLADE 90" (28 FT A-BOOM ONLY) 1 02974237 4 END CAP 2 02974238 2 BLADE SPACER 3 02974235 4 SPINDLE ASY. 4 02974659 8 BOLT, SOCKET HEAD 5 02974658 8 BOLT, SOCKET HEAD 6 02976017 16 SLOTTED NUT, SLOTTED 1/2 NC PLB 7 00001200 6 NUT 8 02974209 1 SAW BODY WLDMNT, USED 01/99 TO 12/01

02978273 1 SAW BODY WLDMNT, USED 01/02 TO 07/02

02979295 1 SAW BODY WLDMNT, USED 08/02 TO CURRENT 9 02974225 3 BRACKET, TENSION ADJUSTMENT 10 00750614 16 NUT 11 002521 3 BOLT 12 02974241 3 BELT 13 02974239 4 SHEAVE 14 02974240 3 BUSHING QD, W/ BOLTS 15 02974206 1 BELT COVER, LONG USED 01/99 TO 12/01

02978265 1 BELT COVER, LONG USED 01/02 TO 07/02

02979297 1 BELT COVER, LONG USED 08/02 TO CURRENT 16 02975441 5 STUD, QUICK RELEASE W/RING 17 02975440 5 RETAINER, F/ QUICK RELEASE 18 02975439 5 RECEIVER, F/ QUICK RELEASE 19 00011400 5 BOLT 20 00011100 6 FLATWASHER 21 00001800 6 LOCKNUT 22 02974216 1 PLATE, MOTOR MOUNT 23 02975175 1 MOTOR ASY, GEAR 3.94 CIR 24 00749130 8 BOLT 25 02976493 2 BRACKET, MOTOR ADJUSTMENT 26 02977203 3 BOLT 27 02976652 1 COUPLING, RUBBER 29 02974205 1 BELT COVER, SHORT USED 01/99 TO 12/01

02978264 1 BELT COVER, SHORT USED 01/02 TO 07/02

02979296 1 BELT COVER, SHORT USED 08/02 TO CURRENT 30 02970302 1 WELDMENT, HITCH POST 31 00037200 7 LOCKNUT 32 02970324 1 PLATE, HITCH POST CLAMP 33 02978600 6 SHIELD, SPLITTER MOUNT 34 02974215 1 HITCH TUBE WLDMNT, 4 BLADE SAW

Page 68

BUZZ BAR HEAD ASY 90 IN - SN 01306 (10-31) & DOWN (PART 2)

Page 69

BUZZ BAR HEAD ASY 90 IN - SN 01306 (10-31) & DOWN (PART 2)

Continued... ITEM PART NO. QTY. DESCRIPTION

35 00015800 9 LOCKNUT 36 00023100 9 BOLT 37 02974207 1 BUMPER 38 02974212 1 SHIELD WLDMNT, REAR 39 02975600 2 SAW BLADE PACKAGE OF 2 BLADES 40 02961280 2 ADAPTER, HYD 20FL-20MJ90 (EXCEPT 28 FT A-BOOM)

02754100 2 ADAPTER, HYD 20FL-16MJ90 (28 FT A-BOOM ONLY) 41 00749103 2 SPLIT FLANGE KIT 42 02960411 1 ADAPTER, HYD 20FJX-20MJ45 (EXCEPT 28 FT A-BOOM)

02959154 2 ADAPTER, HYD 16MJ-16FJX45 (28 FT A-BOOM ONLY) 43 00024100 4 FLATWASHER 44 10074000 4 BOLT 45 00760886 1 MANIFOLD BLOCK 46 00761699 2 O-RING 47 00751790 1 RELIEF VALVE, SET TO 1850 PSI 48 02973124 1 HOSE, #20-20FJX-20FJX-68"LG (EXCEPT 28 FT A-BOOM)

02751300 1 HOSE, #16-16FJX-16FJX-68"LG (28 FT A-BOOM ONLY) 49 02973125 1 HOSE, #20-2FJX-20FJX90-82"LG (EXCEPT 28 FT A-BOOM)

02215500 1 HOSE #16-16FJX-16FJX90-84"LG (28 FT A-BOOM ONLY) 50 02961085 1 CORDURA SLEEVING, 54" LG 51 02960407 1 ADAPTER, HYD 20MJ-20FJX90 (EXCEPT 28 FT A-BOOM)

02956851 1 ADAPTER, HYD 16MJ-16FJX90 (28 FT A-BOOM ONLY) 52 02975434 1 BUSHING QD, MODIFIED 53 00003500 1 GREASE FITTING, STRAIGHT 54 02030300 1 LOCKNUT 55 02958424 1 BUSHING 56 02956972 1 BOLT 57 00752405 1 BOLT 58 02669600 4 KEY 59 02961940 1 PLUG, HEX SOCKET HEAD 60 02968896 1 PLASTIC TIE 11" LG 61 02968894 1 PLASTIC TIE 11" LG 62 40010000 16 COTTER PIN 63 63000500 16 WASHER 64 02956851 1 ADAPTER, HYD ELBOW 90 DEG 65 02975929 1 INSERT SHEET BUZZBAR (EXCEPT 28 FT A-BOOM)

02975931 1 INSERT SHEET BUZZBAR, (28 FT A-BOOM ONLY)

Page 70

BUZZ BAR HEAD ASY 90 IN - SN 01307 (11-01) & UP (PART 1)

Page 71

BUZZ BAR HEAD ASY 90 IN - SN 01307 (11-01) & UP (PART 1)

Continued... ITEM PART NO. QTY. DESCRIPTION

02974204 1 SAW HEAD ASY, 4 BLADE 90" (EXCEPT 28 FT BOOM

02974219 1 SAW HEAD ASY, 4 BLADE 90" (28 FT BOOM ONLY) 1 02974237 4 END CAP 2 02974238 2 BLADE SPACER 3 02974235 3 SPINDLE HUB ASY. 4 02974659 8 BOLT, SOCKET HEAD COUNTERSUNK 1/2"-NC X 3-1/2" W/HOLE 5 02974658 8 BOLT, SOCKET HEAD COUNTERSUNK 1/2"-NC X 2" W/HOLE 6 02976017 16 NUT, SLOTTED 1/2"-NC PLB 7 00001200 6 NUT, HEX 1/2"-NC PL 8 02979295 1 SAW BODY WELDMENT, 4 BLADE 9 02974225 3 TENSION ADJUSTMENT BRACKET 10 00750614 16 NUT, 1/2"-20NF - 90 DEG.CONE LUG PL 11 002521 3 BOLT, HEX HEAD1/2"-NC X 3-1/2" PL GR5 12 02974241 3 BELT, POLY-V 13 02974239 4 SHEAVE, PULLEY 14 02974240 4 BUSHING, QD 15 02979297 1 SHEET, BELT COVER, LEFT 4 BLADE 16 02975441 9 STUD, QUICK RELEASE W/RING 17 02975440 9 RETAINER F/ QUICK RELEASE 18 02975439 9 RECEIVER F/ QUICK RELEASE 19 00011400 1 BOLT, HEX HEAD 3/8"-NC X 1" PL GR5 20 00011100 10 FLATWASHER, 3/8" PL STD 21 00001800 6 LOCKNUT, TOPLOCK 1/2"-NC PLB 22 02978249 1 DRIVE SPINDLE ASY 23 02975175 1 MOTOR, GEAR TYPE 24 00749130 8 BOLT, HEX HEAD 1/2"-13NC X 1-3/4" PL GR5 25 02978267 1 HUB, 1-1/8" BORE 1/4" KEY 26 02978268 1 INSERT, URETHANE 27 02978269 1 COVER, PROTECTIVE NYLON 28 02978266 1 HUB, 1" BORE 29 02979296 1 BELT COVER, SHORT 30 02970302 1 HITCH POST WELDMENT 31 00037200 6 LOCKNUT, TOPLOCK 3/4"-NC PLC 32 02970324 1 PLATE, HITCH POST CLAMP 33 02918600 6 BOLT, HEX HEAD 3/4"-10NC X 2" PL GR8 34 02974215 1 HITCH TUBE WELDMENT, 4 BLADE 35 00015800 9 LOCKNUT, TOPLOCK 3/8"-NC PLB 36 00023100 8 BOLT, HEX HEAD 3/8"-16NC X 1-1/2" PL GR5 37 02974207 1 BUMPER 38 02974212 1 SHIELD WELDMENT, REAR 4 BLADE 39 02975600 1 SAW BLADE SET, SET OF 2 BLADES

Page 72

BUZZ BAR HEAD ASY 90 IN - SN 01307 (11-01) & UP (PART 2)

Page 73

BUZZ BAR HEAD ASY 90 IN - SN 01307 (11-01) & UP (PART 2)

Continued... ITEM PART NO. QTY. DESCRIPTION

40 02961280 2 ADAPTER, HYD 20FL-20MJ45 (EXCEPT 28 FT. BOOM)

02754100 2 ADAPTER, HYD 20FL-16MJ90 (28 FT. BOOM ONLY) 41 00749103 2 SPLIT FLANGE KIT, #20 42 02960411 1 ADAPTER, HYD 20FJX-20MJ45 (EXCEPT 28 FT. BOOM)

02959154 1 ADAPTER, HYD 16MJ-16FJX45 (28 FT BOOM ONLY) 43 00024100 4 FLATWASHER, 1/4" PL 44 10074000 4 BOLT, HEX HEAD 1/4" X 3" 45 00760886 1 MANIFOLD BLOCK 46 00761699 2 O-RING 47 00751790 1 RELIEF CARTRIDGE 48 02973124 1 HOSE, #20-20FJX-20FJX90-82"LG (EXCEPT 28 FT. BOOM)

02751300 1 HOSE, #16-16FJX-16FJX-68"LG (28 FT. BOOM ONLY) 49 02973125 1 HOSE, #20-20FJX-20FJX-68"LG (EXCEPT 28 FT. BOOM)

02215500 1 HOSE, #16-16FJX-16FJX90-84"LG (28 FT. BOOM ONLY) 50 02961085 1 CORDURA SLEEVE 51 00758194 1 DECAL, WARNING BELT SHIELD 52 00769736 1 DECAL, USE/REPAIR GUARDS 53 00769737 1 DECAL, BLADES THROWN OBJECTS 54 02925100 1 DECAL, REPLACEMENT PARTS 55 02958241 1 DECAL, TRACTOR OPERATOR SAFETY 56 02962764 1 DECAL, PINCH POINTS 57 00756004 1 DECAL, SHIELD MISSING 58 02965262 1 DECAL, WARNING HOSE BURST 59 02967827 1 DECAL, MULTI HAZZARD 60 00757139 2 DECAL, ALAMO GROUP 61 02974998 1 DECAL, BUZZBAR 62 D138 1 DECAL, BLADE ROTATION 63 02975158 1 DECAL, HEAR PROTECTION REQD 64 02975170 1 DECAL, ROTATING BLADES 65 02975515 1 DECAL, WARNING DISCONNECT 66 02975516 1 DECAL, NO HITCH POST HERE 68 ----NFS---- - PLATE, SERIAL NUMBER BB90 69 ----NFS---- - METAL, TACK 70 02960407 1 ADAPTER, HYD 20MJ-20FJX90 (EXCEPT 28 FT BOOM)

02956851 1 ADAPTER, HYD 16MJ-16FJX90 (28 FT BOOM ONLY) 72 1458392 1 DECAL, RED REFLECTOR 73 1458393 1 DECAL, YELLOW REFLECTOR 74 00003500 1 GREASE FITTING 75 02030300 1 NUT, 1"-NC 76 02958424 1 BUSHING

Page 74

BUZZ BAR HEAD ASY 90 IN - SN 01307 (11-01) & UP (PART 3)

Page 75

BUZZ BAR HEAD ASY 90 IN - SN 01307 (11-01) & UP (PART 3)

Continued... ITEM PART NO. QTY. DESCRIPTION

77 02956972 1 BOLT, HEX HEAD 1"-NC X 9" 78 00752405 1 BOLT, HEX HEAD 3/4"-NC 79 02669600 5 KEY, 1/4" SQ KEY 1-1/4" LG 80 02961940 1 PLUG 81 02961134 1 DECAL, PATENT PENDING 82 02975929 1 INSERT SHEET, BUZZBAR (EXCEPT 28 FT BOOM)

02975931 1 INSERT SHEET BUZZBAR (28 FT BOOM ONLY) 83 02968896 1 PLASTIC TIE, ORANGE 84 02968894 1 PLASTIC TIE, RED 85 40010000 16 COTTER PIN, 1/8" X 1 86 63000500 16 WASHER, PLATED 87 02979262 1 MOTOR MOUNT TUBE, MACHINED

Page 76

BUZZ BAR SPINDLE ASY - SN BB-01219

ITEM PART NO. QTY. DESCRIPTION

02978249 1 SPINDLE ASY, DRIVE SPINDLE (SHOWN)

02974235 - SPINDLE ASY, NON-DRIVE (NOT SHOWN) 1 02974224 1 SPINDLE HOUSING, MACHINED 2 02978472 - SPINDLE SHAFT, NON-DRIVE SPINDLE

02978257 1 SPINDLE SHAFT, DRIVE SPINDLE 3 02974234 - COLLAR, BEARING PRELOAD 4 70044 - BEARING CUP, UPPER OR LOWER 5 5312314 - BEARING CONE, UPPER OR LOWER 6 15C2000 - WASHER, 1-1/4" HARDEND 7 5D20120 - NUT, HEX SLOTTED 1-1/4"-12NF PL 8 00766549 - SEAL, UPPER OR LOWER 9 00003500 - GREASE FITTING, 1/8" STRAIGHT 10 02959018 - GREASE RELIEF FITTING, 1-5LBS 11 00752177 - BOLT, STUD 1/2"-20NF X 1-7/8" 12 00606000 - COTTER PIN, 3/16 X 2

Page 77

THIS PAGE INTENTIONAL LEFT BLANK

Page 78

CAGE ASY - UNIVERSAL MOUNT

Page 79

CAGE ASY - UNIVERSAL MOUNT

Continued... ITEM PART NO. QTY. DESCRIPTION

1 02909000 1 CAGE WLDMNT 2 00999422 3 BOLT 3 00002700 3 FLATWASHER 4 00001300 3 LOCKWASHER 5 00001200 3 NUT

Page 80

DITCHER - BLADE HEAD ASY (FWD ROT) - PN 02875301

ITEM PART NO. QTY. DESCRIPTION

02875301 - BLADE HEAD ASY. W/ BLADES 1 02875400 1 BLADE HEAD WLD`MT 2 02875900 3 WEAR PLATE 3 02886900 6 BOLT 5 00001800 18 NUT 6 02958680 3 MOUNT BRACKET 7 02958675 3 BLADE, ROUGH CUT

02958685 - SHIM KIT, F/ ROUGH CUT BLADES 8 02891800 12 BOLT 9 02958684 6 BOLT 10 00003901 6 LOCKWASHER 11 00037200 6 NUT

Page 81

DITCHER - BLADE HEAD ASY (REV ROT) - PN 02898501

ITEM PART NO. QTY. DESCRIPTION

02898501 - BLADE HEAD ASY. W/ BLADES 1 02898400 1 BLADE HEAD WLDMNT 2 02875900 3 WEAR PLATE 3 02886900 6 BOLT 5 00001800 18 NUT 6 02958681 3 MOUNT BRACKET 7 02958675 3 BLADE, ROUGH CUT

02958685 - SHIM KIT, F/ ROUGH CUT BLADES 8 02891800 12 BOLT 9 02958684 6 BOLT 10 00003901 6 LOCKWASHER 11 00037200 6 NUT

Page 82

DITCHER - HEAD ASY - PN 02215413

ITEM PART NO. QTY. DESCRIPTION

02215413 - DITCHER HEAD ASY. COMPLETE 1 02975249 1 DITCHER MOUNT WLD`MT 2 02958929 2 DITCHER PIN 3 00749185 2 WASHER 4 02872300 1 SPINDLE ASY. 5 02873900 1 BLADE HOUSING ASY. 8 00037200 7 LOCKNUT 9 02875301 1 BLADE HEAD ASY. 10 02891800 6 BOLT 11 00001300 6 LOCKWASHER 12 02870100 1 MOTOR ASY. 13 02880900 8 BOLT 14 00610600 2 ROLL PIN 15 02961054 2 HOSE 16 02958920 2 ELBOW

Page 83

DITCHER - HOUSING ASY (FWD ROT) - PN 02873900

ITEM PART NO. QTY. DESCRIPTION

02873900 - BLADE HOUSING ASY. 1 02874000 1 BLADE HOUSING WLDMNT 2 02874601 1 DEFLECTOR WLDMNT 3 02875001 1 HINGE PIN 4 00002700 2 FLATWASHER 5 00026200 2 COTTER PIN 6 02875101 1 BACK-UP PLATE WLDMNT 7 02886900 4 BOLT 9 00001800 4 NUT 10 02811000 1 CYLINDER ASY. 11 02276700 2 PIN, F/ CYL. 12 37107B13 4 HAIR PIN CLIP 13 02959086 3 RUBBER FLAP DEFLECTOR 14 02959087 3 CLAMP BAR FLAP DEFLECTOR 15 02961677 11 BOLT 16 00023100 1 BOLT 17 00059700 2 FLAT SOCKET BOLT 19 00015800 14 NUT 20 02959089 1 COVER HOUSING WLDMNT 21 00011100 3 FLATWASHER

Page 84

DITCHER - HOUSING ASY (REV ROT) - PN 02898600

ITEM PART NO. QTY. DESCRIPTION

02898600 - DITCHER DECK ASY, REVERSE ROTATION 1 02899000 1 BLADE HSG WLDMNT, REVERSE ROTATION 2 02874601 1 DEFLECTOR WLDMNT 3 02875001 1 HINGE PIN, DEFLECTOR 4 00002700 2 FLATWASHER 5 00026200 2 COTTER PIN 6 02898801 1 BACK-UP PLATE WLDMNT 7 02886900 5 CARRIAGE BOLT 8 00001800 5 LOCKNUT 9 02811000 - CYLINDER ASY. DEFLECTOR 10 02276700 - PIN, CYLINDER 11 37107B13 - CLIP, HAIR PIN 12 02959076 1 FRONT COVER WLDMNT 14 02959079 1 RUBBER FLAP 15 02959086 3 RUBBER FLAP, 10 WIDE X 17LG. 16 02959087 3 CLAMP-BAR FLAP, DEFLECTOR 17 02961677 11 CARRIAGE BOLT 18 00023100 7 BOLT 19 00010600 1 BOLT 20 00059700 2 BOLT, FLAT SOCKET HEAD 21 00015800 20 LOCKNUT 22 00011100 5 FLATWASHER 23 02880900 1 BOLT 24 00002701 1 FLATWASHER 25 00037200 1 LOCKNUT

Page 85

THIS PAGE INTENTIONAL LEFT BLANK

Page 86

DITCHER - HYD SCHEMATIC W-PARTS

Page 87

DITCHER - HYD SCHEMATIC W-PARTS

Continued... ITEM PART NO. QTY. DESCRIPTION

1 02827700 1 FLANGE KIT 2 02960953 1 TUBE, FRAME TO RETURN FILTER 3 02960809 2 ADAPTER, STRAIGHT 4 02962214 1 ADAPTER, ELBOW 90 DEG. 5 02961004 1 RETURN TUBE STRAIGHT ADAPTER 6 02961825 2 ADAPTER, ELBOW 45 DEG. 7 02411000 2 HOSE BIB 8 02047200 1 ADAPTER, ELBOW 90 DEG. 10 02960807 3 ADAPTER, STRAIGHT 12 00751457 1 ELBOW, 90 DEG. 13 02825900 1 ADAPTER, ELBOW 90 DEG. 14 02961000 1 FILTER ASY, RETURN, IN TANK 15 02961001 1 FILTER ELEMENT 16 63042700 2 ADAPTER, STRAIGHT 17 02960983 1 TOP FOUR LINKAGE HYD TUBE 22

02962249 1 ADAPTER, HYD, ELBOW 18 02823100 8 ADAPTER, HYD, ELBOW 19 02905100 1 HOSE #4 X 114 " LONG 20 02960018 2 ADAPTER, ELBOW 21 02026200 2 HOSE CLAMP, 22 02905000 1 HOSE #4 X 80" LONG 23 02961054 2 HOSE #20 X 52" LONG 24 02961003 1 ADAPTER, STRAIGHT 25 02905300 1 HOSE #4 X 200" LONG 26 02958920 2 ADAPTER, ELBOW 90 DEG. 27 02960984 1 TYPE FOUR LINKAGE HYD TUBE 20 & 23 FT.

02960982 1 TYPE FOUR LINKAGE HYD TUBE 28 FT 28 02889300 2 ADAPTER, ELBOW 29 02512800 1 HOSE #24 X 84" LONG 30 02961094 1 HOSE #20 X 70" LONG 31 02513000 1 HOSE #8 X 108" LONG 32 02906100 1 HOSE #8 X 32" LONG 33 02960986 1 LINE, RETURN, 90 DEG 34 02961054 2 HOSE #20 X 52" LONG 35 02963249 2 PIPE,FOOT GUARD FRONT

Page 88

DITCHER - MOTOR ASY (NEW STYLE) - PN 02978110

ITEM PART NO. QTY. DESCRIPTION

1 02978110 1 MOTOR ASY. HYD GEAR 15.5 CUIN/REV 2 02958920 2 ADAPTER, HYD ELBOW 90 DEG. 3 02978111 2 ADAPTER, HYD STRAIGHT 4 02880900 - BOLT 5 00003901 - LOCKWASHER 6 00037200 - LOCKNUT

Page 89

DITCHER - MOTOR ASY (OLD STYLE) - PN 02870100

ITEM PART NO. QTY. DESCRIPTION

1 02870100 1 MOTOR ASY. 3 02958920 2 ADAPTER, HYD ELBOW 90 DEG. 4 02880900 - BOLT 5 00003901 - LOCKWASHER 6 00037200 - LOCKNUT

Page 90

DITCHER - MOTOR PARTS (NEW STYLE) - PN 02978110

Page 91

DITCHER - MOTOR PARTS (NEW STYLE) - PN 02978110

Continued... ITEM PART NO. QTY. DESCRIPTION

02978110 - MOTOR HYD GEAR 15.5 CUIN/REV 1 02978358 1 BODY,MOTOR 2 02978359 1 FLANGE 3 02978360 1 GEAR, DRIVE 4 02978361 1 GEAR, IDLER 5 02978362 1 PLATE, PRESSURE (TOP) 6 02978363 1 PLATE, PRESSURE (BOTTOM) 7 * 4 SEALING STRIP (IN ITEM 23) 8 * 4 BACK-UP RING (IN ITEM 23) 10 * 1 O-RING, (IN ITEM 23) 11 * 1 SHAFT SEAL (IN ITEM 24) 12 * 1 SNAP RING (IN ITEM 24) 13 02978364 2 RETAINER -CHECK VALVE 14 02978365 2 BALL 1/2" DIA 15 02978366 2 BALL 1/4" DIA 16 02976387 8 BOLT 17 02978371 5 WASHER 18 02978367 1 PLUG 19 * 1 O-RING, (IN ITEM 23) 20 02978368 2 DOWEL PIN 21 NFS 1 NAME PLATE (LISTED AS REF ONLY) 22 * 2 DRIVE SCREW (SEE SEAL KIT ITEM 23) 23 02978370 1 SEAL KIT, SERVICE SOFT GOODS 24 02978369 1 SHAFT SEAL KIT 25 02986425 1 BALL BEARING

Page 92

DITCHER - MOTOR PARTS (OLD STYLE) - PN 02870100

ITEM PART NO. QTY. DESCRIPTION

02870100 - MOTOR ASY, HYD. 1 02864700 1 RETAINING RING 2 02864800 1 SPACER 3 02864900 1 BALL BEARING 4 02865000 1 SEAL RETAINER 5 02865100 1 O-RING 6 02865200 1 LIP SEAL 7 02865300 1 DRIVE SHAFT 8 02865400 1 RETAINING RING 9 02865500 1 COVER,SHAFT END 10 02865600 1 PLUG 11 02896200 2 CHECK ASY. & SET SCREW 12 02865800 2 SHAFT SEAL 13 02865900 2 PIN, SPIRAL 14 02866000 4 BEARING 15 02866100 12 POCKET SEAL 16 02866200 2 THRUST PLATE

Page 93

DITCHER - MOTOR PARTS (OLD STYLE) - PN 02870100

Continued... ITEM PART NO. QTY. DESCRIPTION

17 02866300 2 GASKET SEAL 19 02866500 4 PIN-DOWEL 20 02866600 1 MATCHED GEAR SET 21 02866700 1 PORT END COVER 22 00001400 8 FLATWASHER 23 02866800 8 BOLT 24 02926900 - SEAL KIT - MOTOR 02870100

Page 94

DITCHER - SPINDLE ASY - PN 02872300

ITEM PART NO. QTY. DESCRIPTION

02872300 - SPINDLE ASY. COMPLETE (USED OCT. 2001 & DOWN) 1 02883700 1 SPINDLE HSG W/BRG CUP & ZERK 2 02708100 2 BEARING CUP (USE ASY. P/N 02778200 CUP & CONE) 3 02707700 2 BEARING CONE (USE ASY. P/N 02778200 CUP & CONE) 4 02707600 3 SEAL 5 02872701 1 SPINDLE, W/ CAPTIVE KEYWAY 6 02873200 1 SPACER 7 02870900 2 NUT 8 00003500 1 GREASE FITTING, STRAIGHT 9 02873301 1 COUPLING HALF SPINDLE 10 02959017 1 KEY, SPINDLE DITCHER 11 02873500 1 COUPLING HALF, MOTOR 12 02873800 1 CHAIN COUPLING 13 02959014 1 SETSCREW 14 02959018 1 GREASE RELIEF FITTING 1-5LBS

Page 95

DITCHER - SPINDLE ASY - PN 02973336

ITEM PART NO. QTY. DESCRIPTION

02973336 - SPINDLE ASY. COMPLETE (USED NOV. 2001 & UP) 1 02872400 1 SPINDLE HSG WLD`MT 2 02708100 2 BEARING CUP (USE ASY. P/N 02778200 CUP & CONE) 3 02707700 2 BEARING CONE (USE ASY. P/N 02778200 CUP & CONE) 4 02707600 3 SEAL 5 02872701 1 SPINDLE, W/ CAPTIVE KEYWAY 6 02873200 1 SPACER 7 02870900 2 NUT 8 00003500 1 GREASE FITTING, STRAIGHT 9 02873301 1 COUPLING HALF SPINDLE 10 02959017 1 KEY, SPINDLE DITCHER 11 02984159 1 SPROCKET WLD`MT 12 02873800 1 CHAIN COUPLING 13 02959014 1 SETSCREW 14 02959018 1 GREASE RELIEF FITTING 1-5LBS

Page 96

FILTER ASY - PN 02961000

ITEM PART NO. QTY. DESCRIPTION

02961000 - FILTER ASY. W/ ELEMENT 1 02961001 1 FILTER ELEMENT ONLY 2 02972678 1 SPRING FILTER CARTRIDGE 3 02973782 1 VALVE, FILTER BYPASS 4 02978349 1 FILTER COVER 5 02978354 1 SEAL KIT

Page 97

THIS PAGE INTENTIONAL LEFT BLANK

Page 98

FLAIL AXE - HEAD ASY (SN 04250 & UP) (PART 1)

Page 99

FLAIL AXE - HEAD ASY (SN 04250 & UP) (PART 1)

Continued... ITEM PART NO. QTY. DESCRIPTION

1 00026200 1 COTTER PIN 2 00001800 11 LOCKNUT 3 00002700 15 FLATWASHER 4 00011700 4 LOCKWASHER 5 00013500 3 JAM NUT 6 00015800 4 LOCKNUT 7 00019300 8 BOLT 8 00021400 2 BOLT 9 00023100 4 BOLT 10 00023500 6 FLATWASHER 11 02027400 4 BOLT 12 00035900 4 BOLT 13 00037200 4 LOCKNUT 14 00752176 1 GREASE FITTING, 90 DEG. 15 00753642 2 BOLT 16 02716500 8 LOCKNUT 17 02892000 7 BOLT 18 02918600 6 BOLT 19 02956712 1 RUBBER FLAP 6 X 48-1/2 20 02956714 1 CLAMP BAR 21 02956748 1 SKID SHOE WLDMNT 22 02957041 2 ROLLER BEARING AND FLANGE

02965509 2 LOCKING COLLAR 23 02957655M 1 ROTOR W/KNIVES (FLAIL AXE) 24 02958131A 2 FLANGE BEARING ASY 2" BORE 25 02958198 1 KEY 26 00750940 2 LOCKNUT 27 03200925 1 CARRIAGE BOLT 28 02967325 1 PULLEY 29 02967328 1 QD HUB BUSHING 30 02970301 1 FLAIL AXE HEAD WLDMNT 31 02970302 1 HITCH POST WLDMNT,FLAIL AXE 32 02970324 1 HITCH POST CLAMP PLATE 33 02970325 1 PLATE,COVER,BELT & PULLEY 34 02970326 1 ROD,HINGE,F/A DOOR 35 02970465 1 DOOR WLDMNT, FLAIL AXE 36 02970539 3 V-BELT 37 02970540 1 ROLLER WLDMNT 38 02970583 4 BOLT, SOCKET HEAD 39 02970585 1 SKID SHOE WLDMNT 40 02970586 2 WASHER

Page 100

FLAIL AXE - HEAD ASY (SN 04250 & UP) (PART 2)

Alamo A-Boom User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual