Alamo 02983326P User Manual

BOOM ARM MOWER

Rev 10-08

Part No. 02983326P

PART'S MANUAL

An Operator's Manual was shipped with the equipment in the Manual Canister . This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment. If the Operator's Manual is not with the equipment, contact your dealer or Servis-Rhino (800446-5158) to obtain a Free copy before operating the equipment.

ALAMO INDUSTRIAL

1502 E. Walnut Seguin, Texas 78155 210-372-3551

TO THE OWNER/OPERATOR/DEALER

All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents.

BEFORE YOU START!! Read the safety messages on the implement and shown in your manual.

Observe the rules of safety and common sense!

FAILING TO FOLLOW SAFETY MESSAGES AND OPERATING INSTRUCTION CAN CAUSE

SERIOUS BODILY INJURY OR EVEN DEATH TO OPERATOR AND OTHERS IN THE AREA.

1. 2.NO RIDERS. NO

READ

1. Study and understand Operator’s Manuals, Safety Decals, and Instructional Decals for tractor and implement to prevent misuse, abuse, and accidents. Practice before operating in a confined area or near passersby.

¥ Learn how to stop engine suddenly in an emergency. Be alert for passersby and especially children.

2. Allow no children on or near folding mower or tractor. Allow no riders on tractor or implement. Falling off may cause serious injury or death from being run over by tractor or mower or contact with rotating blades.

3. Operate only with tractor having Roll-Over Protective Structure (ROPS) and with seat belt securely fastened to prevent injury and possible death from falling off or tractor overturn.

¥ Personal Protective Equipment such as Hard Hat, Safety Glasses, Safety Shoes, & Ear Plugs are recommended.

4. Block up or support raised machine and all lifted components securely before putting hands or feet under or working underneath any lifted component to prevent crushing injury or death from sudden dropping or inadvertent operation of controls. Make certain area is clear before lowering or folding.

5. Before transporting, put Lift Lever in detent or full-lift position. Install Transport Safety Devices securely on folding mowers. Put Booms securely in Transport Rest.

¥ Folding and Boom Mowers have raised center of gravity. Slow down when turning and on hillsides.

6. Make certain that SMV sign, warning lights, and reflectors are clearly visible. Follow local traffic codes.

7. Never operate with Cutting Head or Folding Section raised if passersby, bystanders, or traffic are in the area to reduce possibility of injury or death from objects thrown by Blades under Guards or mower structure.

8. Before dismounting, secure implement in transport position or lower to ground.

¥ Put tractor in park or set brake, disengage PTO, stop engine, remove key,and wait until noise of rotation has ceased to

prevent crushing by entanglement in rotating parts which could cause injury or death.

¥ Never mount or dismount a moving vehicle. Crushing form runover may cause serious injury or death.

MANUAL

CHILDREN OPERATORS.

3. USE SAFETY SHOES,

HARD HAT, SAFETY GLASSES, SEATBELTS, ROPS & OPS.

4. BLOCK UP SECURELY

BEFORE WORKING UNDER.

5. TRANSPORT SAFELY,

LOCK UP.

6. USE SMV, LIGHTS, &

REFLECTORS.

7. DO NOT OPERATE

WITH CUTTER OR WING RAISED

8. DO NOT MOUNT OR

DISMOUNT WHILE MOVING.

02967827

WARRANTY INFORMATION:

Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration Form in full and return it within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card and on the Warranty Form that you retain. The use of "will-fit" parts will void your warranty and can cause catastrophic failure with possible injury or death.

PARTS

SECTION

Parts Section – 1

PARTS ORDERING GUIDE

The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this section.

1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locate the parts and quantities required.

2. The Purchase Order must include the name and address of the person or organization ordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts are ordered.

3. The Purchase Order must clearly list the quantity of each part, the complete and correct part number (be sure to include all periods), and the basic name of the part.

4. The Manufacturer reserves the right to substitute parts where applicable.

5. Some parts are unlisted items which are special production items not normally stocked and are subject to special handling. Request a quotation for such parts before sending a Purchase Order.

6. The Manufacturer reserves the right to change prices without prior notice.

NOTE: Please refer to The Safety Section in the front of this Manual for the proper

Part Number when ordering Replacement Safety Decals.

For maximum safety and to guarantee optimum product reliability, always use genuine Servis-Rhino Parts. The use of inferior replacement parts may cause premature or catastrophic failure which could result in serious injury or death. Direct any questions regarding parts to:

ALAMO INDUSTRIAL

1502 E. Walnut Seguin, Texas 78155 830-379-1480

Parts Section – 2

PART NAME INDEX

48 IN FLAIL - HEAD ASY (SOLID MNT) (PART 1).................................................................................................................................. 5

48 IN FLAIL - HEAD ASY (SOLID MNT) (PART 2)................................................................................................................................. 7

48 IN FLAIL - HEAD ASY (SWIVEL MNT) (PART 1).............................................................................................................................. 9

48 IN FLAIL - HEAD ASY (SWIVEL MNT) (PART 2)............................................................................................................................ 11

48 IN FLAIL - HEAD ASY (SWIVEL MNT) (PART 3)............................................................................................................................ 13

48 IN FLAIL - HEAD ASY DECALS......................................................................................................................................................... 15

60 IN ROTARY - BLADE BAR ASY......................................................................................................................................................... 17

60 IN ROTARY - HEAD ASY (SOLID MNT)........................................................................................................................................... 19

60 IN ROTARY - HEAD ASY (SWIVEL MNT)....................................................................................................................................... 21

60 IN ROTARY - HEAD SUB-ASY (SOLID MNT).................................................................................................................................. 23

60 IN ROTARY - HEAD SUB-ASY (SWIVEL MNT).............................................................................................................................. 25

60 IN ROTARY - MOTOR (PARTS) - PN 02961747................................................................................................................................ 27

60 IN ROTARY - MOTOR (W-FITTINGS) - PN 02961747...................................................................................................................... 29

BOOM ASY - 18 FT BOOM - PN 02982733 (PART 1)............................................................................................................................. 31

BOOM ASY - 18 FT BOOM - PN 02982733 (PART 2)............................................................................................................................. 33

BOOM ASY - 22 FT BOOM - PN 02982736 (PART 1)............................................................................................................................. 35

BOOM ASY - 22 FT BOOM - PN 02982736 (PART 2)............................................................................................................................. 37

BOOM ASY - 25 FT BOOM - PN 02982739 (PART 1)............................................................................................................................. 39

BOOM ASY - 25 FT BOOM - PN 02982739 (PART 2)............................................................................................................................. 41

COMMON CRATE COMPONENTS - ELECT VALVE (PART 1).......................................................................................................... 43

COMMON CRATE COMPONENTS - ELECT VALVE (PART 2).......................................................................................................... 45

COMMON CRATE COMPONENTS - MAN VALVE (PART 1)............................................................................................................. 47

COMMON CRATE COMPONENTS - MAN VALVE (PART 2)............................................................................................................. 49

COUNTER WEIGHT W-DECALS............................................................................................................................................................. 51

CUTTER CONTROL VALVE BLOCK - PN 02982553............................................................................................................................ 52

DECALS - 18-22-25 FT BOOM.................................................................................................................................................................. 53

DECALS - 60 IN ROTARY HEAD - SOLID MNT................................................................................................................................... 54

DECALS - 60 IN ROTARY HEAD - SWIVEL MNT................................................................................................................................ 55

DECALS - HYD TANK & PUMP - ELECT VALVE................................................................................................................................ 56

DECALS - HYD TANK & PUMP - MAN VALVE................................................................................................................................... 57

DECALS - JOYSTICK OPERATION - PN 02983489............................................................................................................................... 58

DECALS - SAFETY BOOK LISTING....................................................................................................................................................... 59

DECALS - VALVE MAN HANDLE OPERATION - PN 02983408......................................................................................................... 61

DIVERTER VALVE - DOOR & SWIVEL - PN 02977622....................................................................................................................... 62

FILTER ASY - RETURN - PN 02964748................................................................................................................................................... 63

FILTER ASY - PRESSURE - PN 02976066............................................................................................................................................... 64

FILTER ASY - PRESSURE - PN 02985280............................................................................................................................................... 65

HOSE ROUTING - 18 FT BOOM............................................................................................................................................................... 67

HOSE ROUTING - 22 FT BOOM............................................................................................................................................................... 69

HOSE ROUTING - 25 FT BOOM............................................................................................................................................................... 71

PART NAME INDEX

HOSE ROUTING - SWING CYL (18-22-25 FT BOOM).......................................................................................................................... 73

HYD CYL ASY - DIPPER (18 FT BOOM) - PN 02979920....................................................................................................................... 75

HYD CYL ASY - HEAD SWIVEL (OPTIONAL) - PN 02981315............................................................................................................ 76

HYD CYL ASY - LIFT (18-22-25 FT BOOM) - PN 02981279................................................................................................................. 77

HYD CYL ASY - SWING W/ SPHERICAL ROD END - PN 02981275A............................................................................................... 78

HYD CYL ASY - SWING W/ TUBE ROD END - PN 02981275.............................................................................................................. 79

HYD CYL ASY - TILT (18-22-25 FT BOOM) - PN 02981280................................................................................................................. 80

HYD OIL COOLER & FAN ASY - PN 02981377..................................................................................................................................... 81

HYD SCHEMATIC - SOLID MNT HEAD (STD) - 18-22-25 FT BOOM................................................................................................ 82

HYD SCHEMATIC - SWIVEL MNT HEAD (OPT) - 18-22-25 FT BOOM............................................................................................. 83

HYD TANK SUB-ASY - PN 02982882...................................................................................................................................................... 85

HYD TANK W-PUMP & ELECT VALVE ASY - P/N 02983488............................................................................................................. 87

HYD TANK W-PUMP & MAN VALVE ASY - P/N 02983487................................................................................................................ 89

HYD VALVE CABLE & MOUNTING KIT.............................................................................................................................................. 91

JOYSTICK CONSOLE ASY - PN 02983014............................................................................................................................................. 93

PUMP ASY (PARTS) - PN 02982575......................................................................................................................................................... 95

PUMP-TANK-VALVE COVER - PN 02981381........................................................................................................................................ 97

UNDER MOUNT FRAME ASY - PN 02986426 (PART 1)....................................................................................................................... 99

UNDER MOUNT FRAME ASY - PN 02986426 (PART 2)..................................................................................................................... 101

VALVE ASSEMBLY - ELECTRO-HYDRAULIC VALVE - P/N 02985869......................................................................................... 103

VALVE ASSEMBLY - MANUAL-HYDRAULIC VALVE - P/N 02985870......................................................................................... 104

WIRE HARNESS (ELECT-HYD VALVE OPT) - PN 02982923............................................................................................................ 105

WIRE HARNESS (MAN-HYD VALVE STD) - PN 02982922............................................................................................................... 107

WIRE HARNESS - JOYSTICK RESISTER (OPT) - PN 02981990........................................................................................................ 109

48 IN FLAIL - HEAD ASY (SOLID MNT) (PART 1)

Continued... ITEM PART NO. QTY. DESCRIPTION

02983542 1 ASY,48" FLAIL AXE, GEAR 1 02970301 1 WLDMT, FLAIL AXE HEAD 2 02957655M 1 ASY, CUTTERSHAFT, 48" F/A 3 02970465 1 WLDMT DOOR, 48" FLAIL AXE 4 02973544 1 WLDMT, MOTOR MOUNT 5 02970709 1 PLATE, COVER FLAIL AXE 6 10119000 2 HHCS 5/16 NC 1 PL5 7 00023500 6 FLATWASHER 5/16, TYPE AW, ZP 8 00750940 2 NUT, TOPLOCK 5/16 NC PL B 9 02958131A 2 FLANG BEARING ASY 10 02956714 1 CLAMP BAR 11 02956712 1 RUBBER FLAP 12 02970326 1 ROD-HINGE, F/A DOOR 13 02958198 1 1/2 X 1/2 X 1 7/8 LG 14 02970585 1 WLDM SKIDSHOE INSIDE FLAIL AXE 15 02956748 1 SKID SHOE WLDMT 16 02970540 1 WLDMT - REAR ROLLER 17 02967325 2 PULLEY, 3G5V - 8.50 DIA 18 02970325 1 PLATE-BELT & PULLEY COVER 19 02972442 1 FLAIL AXE BEARING GUARD 20 02675800 2 HHCS 5/8 X 1-1/2 PL GR5 21 00010300 2 LOCKWASHER 5/8 22 00001400 4 FLATWASHER 5/8 PL STD 23 00019300 8 HHCS 1/2 X 1-1/2 NF GR5 PL 24 000642 8 LOCKNUT TLM 1/2 NC PLB 25 00752670 1 GREASE FITTING 1/4-28 BOLT THD 26 00008300 6 BOLT, HHCS 5/8" NC X 1-3/4" PL5 27 00695100 5 LOCKNUT TOPLOCK 5/8NC PLB 28 02970710A 1 CYL, DOOR, 48" F/A 29 02970324 1 PLATE-CLAMP, HITCHPOST 30 000941 1 GREASE ZERK 1/4-28 90 BOLT THD 31 02970583 4 SHCS 3/8 NF 1-1/2 PL GR5 32 23504500 8 JAMNUT 3/8 NF 33 03200925 1 CARR 5/8 NC X 3 PL GR5 34 02967328 1 BUSHIN, QD HUB SF 1-15/16 ID 35 02970537 1 BUSHING, QD HUB SF 1 ID 36 00013500 3 NUT, 3/8 NC JAMNUT 37 02970539 3 V BELT 38 02956768 2 PIN, ROLL 5/32X1 39 00011700 4 LOCKWASHER 5/16 PL STD 40 00035900 4 HHCS 5/16 NC X 3/4 GR5

48 IN FLAIL - HEAD ASY (SOLID MNT) (PART 2)

Continued... ITEM PART NO. QTY. DESCRIPTION

48 IN FLAIL - HEAD ASY (SWIVEL MNT) (PART 1)

Continued... ITEM PART NO. QTY. DESCRIPTION

1 02970301 1 WLDMT, FLAIL AXE HEAD 2 02957655M 1 ASY, CUTTERSHAFT, 48" F/A 3 02970465 1 WLDMT DOOR, 48" FLAIL AXE 4 02973544 1 WLDMT, MOTOR MOUNT 5 02970709 1 PLATE, COVER FLAIL AXE 6 10119000 2 HHCS 5/16 NC 1 PL5 7 00023500 6 FLATWASHER 5/16, TYPE AW, ZP 8 00750940 2 NUT, TOPLOCK 5/16 NC PL B 9 02958131A 2 FLANG BEARING ASY 10 02956714 1 CLAMP BAR 11 02956712 1 RUBBER FLAP 12 02970326 1 ROD-HINGE, F/A DOOR 13 02958198 1 1/2 X 1/2 X 1 7/8 LG 14 02970585 1 WLDM SKIDSHOE INSIDE FLAIL AXE 15 02956748 1 SKID SHOE WLDMT 16 02970540 1 WLDMT - REAR ROLLER 17 02967325 2 PULLEY, 3G5V - 8.50 DIA 18 02970325 1 PLATE-BELT & PULLEY COVER 19 02972442 1 FLAIL AXE BEARING GUARD 20 02675800 2 HHCS 5/8 X 1-1/2 PL GR5 21 00010300 2 LOCKWASHER 5/8 22 00001400 4 FLATWASHER 5/8 PL STD 23 00019300 8 HHCS 1/2 X 1-1/2 NF GR5 PL 24 000642 8 LOCKNUT TLM 1/2 NC PLB 25 00752670 1 GREASE FITTING 1/4-28 BOLT THD 26 00008300 6 BOLT, HHCS 5/8" NC X 1-3/4" PL5 27 00695100 5 LOCKNUT TOPLOCK 5/8NC PLB 28 02970710A 1 CYL, DOOR, 48" F/A 29 02970324 1 PLATE-CLAMP, HITCHPOST 30 000941 1 GREASE ZERK 1/4-28 90 BOLT THD 31 02970583 4 SHCS 3/8 NF 1-1/2 PL GR5 32 23504500 8 JAMNUT 3/8 NF 33 03200925 1 CARR 5/8 NC X 3 PL GR5 34 02967328 1 BUSHIN, QD HUB SF 1-15/16 ID 35 02970537 1 BUSHING, QD HUB SF 1 ID 36 00013500 3 NUT, 3/8 NC JAMNUT 37 02970539 3 V BELT 38 02956768 2 PIN, ROLL 5/32X1 39 00011700 4 LOCKWASHER 5/16 PL STD 40 00035900 4 HHCS 5/16 NC X 3/4 GR5

48 IN FLAIL - HEAD ASY (SWIVEL MNT) (PART 2)

Continued... ITEM PART NO. QTY. DESCRIPTION

41 00001800 12 LOCKNUT TLM 1/2 NC PLB 42 00002700 7 FLATWASHER, 1/2 PL STD 43 02892000 7 HHCS 1/2 X 1-1/2 NC GR8 PL 44 02957041 2 ROLLER BEARING & FLANGE 45 00013300 4 BOLT, HHCS 1/2" NC X 2" PL5 46 00753642 2 HHCS 3/8 NC 1-1/4 PL5 47 02970586 2 WASHER, 2 X 7/16 X 3/16 48 00023100 6 HHCS 3/8 X 1-1/2 NC PL GR5 49 00015800 6 LOCKNUT TLM 3/8 NC PLC 50 00003300 1 HHCS 3/4" X 4" LG 51 00037200 13 NUT 3/4 NC LOCKNUT 52 00008200 1 BOLT, HHCS 1/2" NC X 3-3/4" PL5 53 02960018 4 ADP, HYD, ELBOW, 4MB-4MJ90 54 02918600 10 HHCS 3/4 NC 2 PL8 55 02981757 2 WELDMENT, PIN, HITCH POST 56 02971702 2 FLATWASHER, 1-3/8 TYPE B PL NARROW 57 02971701 2 NUT, SLOTTED 1-3/8 12NF PLB 58 165020 2 PIN, COTTER 5/16 X 2-1/2 PL 59 02968896 1 PLASTIC TIE, ORANGE, 11LG 60 02968894 1 PLASTIC TIE, RED, 11LG 61 02984370 1 ADP, SWIVEL, FLAIL AXE 62 02981318 1 BEARING, 12OD X 5.8ID 63 02981741 1 WELDMENT, HITCH POST, MAVERICK 64 02981315 1 CYLINDER, 2.5B X 1.5R X 14.38S 65 02984374 1 WLDMNT, SWIVEL, CYL BRKT 66 02981820 28 SHCS 1/2 NC X 1 1/2" LG PL8 67 02963646 1 HHCS 3/4 NC 2-1/2 PL8 68 00754105 1 HHCS 3/4 NC 4 1/2 PL8 69 02984382 1 CLAMP, PLATE, SWIVEL 70 02984470 2 STOP, FLAIL AXE SWIVEL 71 00021400 2 BOLT, HHCS 1/4" NC X 3/4" PL 72 02959924 2 NUT, TOPLOCK 1/4 NC PLB 73 02968832 1 PLASTIC TIE, GREEN 74 02968833 1 PLASTIC TIE, GREEN & WHITE 75 02968836 1 PLASTIC TIE, YELLOW 76 02968837 1 PLASTIC TIE, YELLOW & WHITE 77 002369 1 DECAL, DANGER, MULTI-HAZARD 78 02965141 1 DECAL, DANGER THROWN OBJ 79 02967668 1 DECAL, DANGER, SAFETY SHIELD 80 02967867 1 DECAL, DANGER SAFETY SHIELD 81 00725739 1 DECAL WARN. SHEILD&GUARDS

48 IN FLAIL - HEAD ASY (SWIVEL MNT) (PART 3)

Continued... ITEM PART NO. QTY. DESCRIPTION

82 00758194 1 DECAL,WARNING BELT SHIELD 83 02925100 1 DECAL-REPLACEMENT PARTS 84 000108 1 DECAL-OPERATING INSTRUCTIONS 85 000678 1 DECAL- GREASE FITTING INSIDE 86 00757139 1 DECAL, ALAMO INDUSTRIAL 87 02970887 1 DECAL, FLAIL AXE 48 88 3710151 4 METAL TACK 89 02971498 1 PLATE,S/N 48 FLAIL AXE 90 02979551 1 DECAL, ALAMO IND. SQ. GREEN & 91 02987315 1 MOTOR, GEAR 3.0 CU/IN F/A 92 00749103 2 SPLIT FLG KIT #20 93 02985030 2 ADP HYD 20FL-20MJ FLANGE

48 IN FLAIL - HEAD ASY DECALS

Continued... ITEM PART NO. QTY. DESCRIPTION

1 002369 1 DECAL, DANGER, MULTI-HAZARD 2 02965141 1 DECAL, DANGER THROWN OBJ 3 02967668 1 DECAL, DANGER, SAFETY SHIELD 4 02967867 1 DECAL, DANGER SAFETY SHIELD 5 00725739 1 DECAL WARN. SHEILD&GUARDS 6 00758194 1 DECAL, WARNING, BELT SHIELD 7 02925100 1 DECAL, REPLACEMENT PARTS 8 000108 1 DECAL, INSTRUC, FLAIL OPER 9 000678 1 DECAL, GREASE FITTING INSIDE 10 00757139 1 DECAL, LOGO (ALAMO BY T.K.) 11 02970887 1 DECAL, LOGO, FLAIL AXE 48" 12 3710151 4 METAL TACK 13 02971498 1 PLATE, S/N FLAIL AXE 48" 14 02979551 1 DECAL, ALAMO INDUSTRIAL LOGO

60 IN ROTARY - BLADE BAR ASY

ITEM PART NO. QTY. DESCRIPTION

02969230 1 BLADE BAR ASY, W/ BLADES 1 00020900 2 HEX SLOTTED NUT, HVY 1-1/8"-NF PL GR5 2 00023200 2 ROLL PIN, 3/16" X 1-3/4" 3 02969234 4 FLATWASHER, 1-1/4" HARDENED PL 4 02761500 1 BLADE SET, MATCHED SET OF TWO 5 02971387 1 LEAF BLADE BAR, TOP 6 02969232 1 LEAF BLADE BAR, MIDDLE 7 02969233 1 LEAF BLADE BAR, BOTTOM 8 02969235 2 BOLT, HEX HEAD 1-1/4"-NC X 3" PL GR8 9 02969236 2 BOLT, HEX HEAD 1-1/4"-NC X 2-1/4" PL GR8 10 02782900 2 BLADE BOLT, SHOULDERED 11 02957089 2 LOCKWASHER, 1-1/8" PL STD 12 00003901 4 LOCKWASHER, 3/4" PL HEAVY 13 02964861 4 BOLT, SOCKET HEAD 3/4"-NC X 4" PL GR8 14 02984572 1 BLADE BOLTS, NUTS, ROLLPIN KIT (INCLUDES 2 EACH OF ITEMS 1, 2, & 10)

THIS PAGE INTENTIONAL LEFT BLANK

60 IN ROTARY - HEAD ASY (SOLID MNT)

Continued... ITEM PART NO. QTY. DESCRIPTION

02983222 1 60 IN ROTARY HEAD ASY, W/ STD SOLID MOUNT 1 02983221 1 60 IN HEAD SUB-ASY 2 02971963 1 DOOR WELDMENT 3 02967782 1 HINGE ROD 4 99338S 2 ROLL PIN, 1/4" X 3/4" 5 02961480A 1 CYL ASY, 2" BORE X 9-1/4" STROKE 6 02981757 2 PIN WELDMENT, HITCH POST 7 02971702 2 FLATWASHER, 1-3/8" TYPE B NARROW 8 02971701 2 HEX SLOTTED NUT, 1-3/8"-12NF PLB 9 165020 2 COTTER PIN, 5/16" X 2-1/2" PL 10 651102 1 PIN, DRILLED 11 02976448 1 PIN, 5/8" X 2-1/2" DRILLED 12 00755153 2 COTTER PIN, 3/16" X 1-1/2" PLATED 13 02885700 2 REAR FLAP 10" X 63" X 3/8" THK 14 02885800 1 REAR CLAMP BAR 15 00759862 2 SHIELD, DEBRIS DEFLECTOR REAR C 16 00756875 1 FLAP, HOLD DOWN BAR 17 00023100 11 BOLT, HEX HEAD 3/8"-16NC X 1-1/2" PL GR5 18 00011100 46 FLATWASHER, 3/8" PL STD 19 00015800 23 LOCKNUT, 3/8"-NC PLB 20 00007000 12 BOLT, HEX HEAD 3/8"-NC X 1-3/4" PL GR5 21 02960018 2 ADAPTER, HYD ELBOW 22 02767500 1 HEX WRENCH, 5/8" MODIFIED 23 02968836 1 PLASTIC TIE, 4" LG - YELLOW 24 02968837 1 PLASTIC TIE, 4" LG - YELLOW & WHITE 25 02968894 1 PLASTIC TIE, 11" LG - RED 26 02968896 1 PLASTIC TIE, 11" LG - ORANGE 27 ----N/S---- 1 S/N PLATE (NON-SALEABLE ITEM) 28 02972949 2 BOLT 3/8 NC GR8 X 1-1/4 29 00012101 2 LOCKWASHER 3/8 PL HVY

60 IN ROTARY - HEAD ASY (SWIVEL MNT)

Continued... ITEM PART NO. QTY. DESCRIPTION

02983208 1 60" ROTARY HEAD ASY, OPT SWIVEL MOUNT 1 02983207 1 60" ROTARY HEAD SUB ASY 2 02971963 1 DOOR WELDMENT 3 02967782 1 HINGE ROD 4 99338S 2 ROLL PIN, 1/4" X 3/4" 5 02961480A 1 CYL ASY, 9-1/4" STROKE 6 02981315 1 CYL ASY, 14-3/4" STROKE 7 02981757 2 PIN WELDMENT, HITCH POST 8 02971702 2 FLATWASHER, 1-3/8" TYPE B NARROW 9 02971701 2 HEX SLOTTED NUT, 1-3/8"-12NF PLB 10 165020 2 COTTER PIN, 5/16" X 2-1/2" PL 11 651102 1 PIN, DRILLED 12 02976448 1 PIN, DRILLED 5/8" X 2-1/2" 13 00755153 2 COTTER PIN, 3/16" X 1-1/2" PLATED 14 02960916 1 BOLT, HEX HEAD 3/4"-NC X 5" PL GR8 15 02963646 1 BOLT, HEX HEAD 3/4"-NC X 2-1/2" PL GR8 16 00037200 2 LOCKNUT, 3/4"-NC PLC 17 02887500 2 REAR FLAP, 10" X 63" X 3/8" THK 18 02885800 1 REAR CLAMP BAR 19 00759862 2 SHIELD, DEBRIS DEFLECTOR REAR C 20 00756875 1 FLAP HOLD DOWN BAR 21 00023100 11 BOLT, HEX HEAD 3/8"-16NC X 1-1/2" PL GR5 22 00011100 46 FLATWASHER, 3/8" PL STD 23 00015800 23 LOCKNUT, 3/8"-NC PLB 24 00007000 12 BOLT, HEX HEAD 3/8"-NC X 1-3/4" PL GR5 25 02960018 2 ADAPTER, HYD ELBOW 26 03200762 2 ADAPTER, HYD ELBOW 6MB - 4MJ 90 DEG 27 02767500 1 HEX WRENCH, 5/8" MODIFIED 28 02968836 1 PLASTIC TIE, 4" LG - YELLOW 29 02968837 1 PLASTIC TIE, 4" LG - YELLOW & WHITE 30 02968832 1 PLASTIC TIE, 4" LG - GREEN 31 02968833 1 PLASTIC TIE, 4" LG - GREEN & WHITE 32 02968894 1 PLASTIC TIE, 11" LG - RED 33 02968896 1 PLASTIC TIE, 11" LG - ORANGE 34 ----N/S---- 1 S/N PLATE (REF ONLY NON-SALEABLE ITEM) 35 02972949 2 BOLT 3/8 NC GR8 X 1-1/4 36 00012101 2 LOCKWASHER 3/8 PL HVY

60 IN ROTARY - HEAD SUB-ASY (SOLID MNT)

Continued... ITEM PART NO. QTY. DESCRIPTION

02983221 1 60" ROTARY HEAD SUB-ASY. W/ STR SOLID MOUNT 1 02981410 1 DECK WELDMENT 2 02982749 1 HITCH POST WELDMENT, STD SOLID MOUNT 3 02892100 8 BOLT, HEX HEAD 3/4"-NC X 1-3/4" PL GR5 4 00037200 16 LOCKNUT, 3/4"-NC PLC 5 02968859A 1 SPINDLE HOUSING ASY, SPLINED 6 5312316 16 WASHER, (SPECIAL) 7 02966899 2 SKID SHOE 8 02969230 1 BLADE BAR ASY, W/ BLADES 9 02964861 4 BOLT, SOCKET HEAD 3/4"-NC X 4" PL GR8 10 00003901 4 LOCKWASHER, 3/4 PL HEAVY 11 00059700 14 BOLT, FLAT SOCKET HEAD 3/8"-NC X 1-1/4" 12 00015800 14 LOCKNUT, 3/8"-NC PLB 13 15B600 14 WASHER, 3/8" SAE P 14 02961747 1 MOTOR ASY, CAST IRON W/SPLINED SHAFT 15 00019600 4 LOCKWASHER, 1/2" HEAVY 16 02891800 4 BOLT, HEX HEAD 1/2"-NC X 1-3/4" PL GR8 17 02961038 1 GASKET, SPINDLE TO MOTOR 18 03200269 8 BOLT, HEX HEAD 3/4"-NC X 3" PL GR8 19 00749101 2 SPLIT FLANGE KIT, 1-1/2" 20 02962774 2 ADAPTER, HYD ELBOW

60 IN ROTARY - HEAD SUB-ASY (SWIVEL MNT)

Continued... ITEM PART NO. QTY. DESCRIPTION

02983207 1 60" HEAD SUB-ASY, W/ OPT SWIVEL MOUNT 1 02981410 1 DECK WELDMENT 2 02981752 1 PLATE, HITCH POST BOTTOM 3 02981820 28 BOLT, SOCKET HEAD 1/2"-NC X 1-1/2" PL GR8 4 02981318 1 SLEWING BEARING 5 02981741 1 HITCH POST WELDMENT, (OPT SWIVEL MOUNT) 6 02892100 8 BOLT, HEX HEAD 3/4"-NC X 1-3/4" PL GR5 7 00037200 16 LOCKNUT, 3/4"-NC PLC 8 02968859A 1 SPINDLE HOUSING ASY, SPLINED SHAFT 9 5312316 16 WASHER, (SPECIAL) 10 02966899 2 SKID SHOE 11 02969230 1 BLADE BAR ASY, W/ BLADES 12 02964861 4 BOLT, SOCKET HEAD 3/4"-NC X 4" PL GR8 13 00003901 4 LOCKWASHER, 3/4" PL HEAVY 14 00059700 14 BOLT, FLAT SOCKET HEAD 3/8"-NC X 1-1/4" 15 00015800 14 LOCKNUT, 3/8"-NC PLB 16 15B600 14 WASHER, 3/8" SAE P 17 02961747 1 MOTOR ASY, CAST IRON W/ SPLINED SHAFT 18 00019600 4 LOCKWASHER, 1/2" HEAVY 19 02891800 4 BOLT, HEX HEAD 1/2"-NC X 1-3/4" PL GR8 20 02961038 1 GASKET, SPINDLE TO MOTOR 21 03200269 8 BOLT, HEX HEAD 3/4"-NC X 3" PL GR8 22 00749101 2 SPLIT FLANGE KIT, 1-1/2" 23 02962774 2 ADAPTER, HYD ELBOW

60 IN ROTARY - MOTOR (PARTS) - PN 02961747

ITEM PART NO. QTY. DESCRIPTION

02961747 1 MOTOR ASY, CAST IRON W/ SPLINED SHAFT 1 02962200 1 SNAP RING 2 -------------- 1 O-RING (SEE SEAL KIT) 3 02962199 1 SEAL RETAINER 4 -------------- 2 SEAL (SEE SEAL KIT) 5 02962192 1 MOUNTING FLANGE 6 02961940 1 PLUG, HEX SOCKET HEAD 4MB 7 02961931 2 CHECK ASY 8 -------------- 4 SEAL END (SEE SEAL KIT) 9 -------------- 2 THRUST PLATE (SEE SEAL KIT) 10 02962195 1 GEAR SET 11 ------------- 2 SQUARE SEAL, (SEE SEAL KIT) 12 02962201 4 DOWEL PIN 13 02962194 1 GEAR HOUSING

+ 86 hidden pages