3. USE SAFETY SHOES,HARD
HAT, SAFETY GLASSES,
SEAT BELTS, & ROPS.
2. NO RIDERS, NO CHILDREN
OPERATORS.
1.
MANUAL
READ
Never mount or dismount a moving vehicle. Crushing from runover may cause injury or death.
Put tractor in park or set brake, disengage PTO, stop engine, remove key, and wait until noise of rotation has ceased
to prevent entanglement in rotating parts which may cause injury or death.
8. Before dismounting, secure flail mower in transport position or lower to ground.
7. Never operate with Flail Mower or Folding Section raised if passersby, bystandards or traffic are in the area to reduce
possibility of injury or death from objects thrown by Blades under Shields or implement structure.
6. Make certain that SMV sign, Warning Lights, and Reflectors are clearly visible. Follow local traffic codes.
Install Restrictor in folding circuit to slow down lowering and unfolding if action is faster than is desirable.
5. Before transporting, put Lift Lever in detent or full-lift position. Install Transport Safety Devices securely on folding
implements. Slowdown when turning and on hillsides.
4. Block up or support raised machine and all lifted components securely before putting hands or feet under or working
underneath any lifted component to prevent crushing injury or death from sudden dropping or inadvertent operation of
controls. Make certain that area is clear before lowering or folding.
3. Operate only with tractor having Roll-Over Protective Structure (ROPS) and with seatbelt fastened securely and
snugly to prevent injury and possible death from falling off or tractor overturn. Personal Protective Equipment such as
Hard Hat, Safety Glasses, Safety Shoes, and Ear Plugs are recommended.
2. Allow no children on or near implement of tractor. Allow no riders on tractor or implement. Falling off can cause
serious injury or death from being runover by tractor or mower or contact with Flail Mower Blades.
Learn how to stop engine suddenly in an emergency. Be alert for passersby and especially children.
1. Study and understand Operator's Manuals, Safety Signs, and Instructional Decals for tractor & flail mower to prevent
misuse, abuse, & accidents. Practice before operating mower in a confined area or near passersby.
FAILING TO FOLLOW SAFETY MESSAGES AND OPERATING INSTRUCTIONS CAN CAUSE
SERIOUS BODILY INJURY OR EVEN DEATH TO OPERATOR AND OTHERS IN THE AREA.
DANGER
All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who
recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to
be used with all its safety equipment properly attached to minimize the chance of accidents.
BEFORE YOU START!!Read the safety messages on the implement and shown in your manual.
Observe the rules of safety and common sense!
FAILING TO FOLLOW SAFETY MESSAGES AND OPERATING INSTRUCTIONS CAN CAUSE
SERIOUS BODILY INJURY OR EVEN DEATH TO OPERATOR AND OTHERS IN THE AREA.
2. NO RIDERS, NO CHILDREN
3. USE SAFETY SHOES,HARD
HAT, SAFETY GLASSES,
SEAT BELTS, & ROPS.
4. BLOCK UP SECURELY
BEFORE WORKING UNDER.
1. Study and understand Operator's Manuals, Safety Signs, and Instructional Decals for tractor & flail mower to prevent
misuse, abuse, & accidents. Practice before operating mower in a confined area or near passersby.
Learn how to stop engine suddenly in an emergency. Be alert for passersby and especially children.
2. Allow no children on or near implement of tractor. Allow no riders on tractor or implement. Falling off can cause
serious injury or death from being runover by tractor or mower or contact with Flail Mower Blades.
3. Operate only with tractor having Roll-Over Protective Structure (ROPS) and with seatbelt fastened securely and
snugly to prevent injury and possible death from falling off or tractor overturn. Personal Protective Equipment such as
Hard Hat, Safety Glasses, Safety Shoes, and Ear Plugs are recommended.
4. Block up or support raised machine and all lifted components securely before putting hands or feet under or working
underneath any lifted component to prevent crushing injury or death from sudden dropping or inadvertent operation of
controls. Make certain that area is clear before lowering or folding.
5. Before transporting, put Lift Lever in detent or full-lift position. Install Transport Safety Devices securely on folding
implements. Slowdown when turning and on hillsides.
Install Restrictor in folding circuit to slow down lowering and unfolding if action is faster than is desirable.
6. Make certain that SMV sign, Warning Lights, and Reflectors are clearly visible. Follow local traffic codes.
7. Never operate with Flail Mower or Folding Section raised if passersby, bystandards or traffic are in the area to reduce
possibility of injury or death from objects thrown by Blades under Shields or implement structure.
8. Before dismounting, secure flail mower in transport position or lower to ground.
Put tractor in park or set brake, disengage PTO, stop engine, remove key, and wait until noise of rotation has ceased
to prevent entanglement in rotating parts which may cause injury or death.
Never mount or dismount a moving vehicle. Crushing from runover may cause injury or death.
5. TRANSPORT SAFELY,
6. USE SMV, LIGHTS, &
LOCK UP.
7. DO NOT OPERATE WITH
MOWER OR WING RAISED.
8. DO NOT MOUNT OR
DISMOUNT WHILE MOVING.
WARRANTY INFORMATION:
Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration Form
in full and return it within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card
and on the Warranty Form that you retain. The use of "will-fit" parts will void your warranty and can cause
catastrophic failure with possible injury or death.
PARTS
SECTION
Parts Section – 1
PARTS ORDERING GUIDE
®
®
The following instructions are offered to help eliminate needless delay and error in
processing purchase orders for the equipment in this section.
1. The Parts Section is prepared in logical sequence and grouping of parts that belong to
the basic machine featured in this manual. Part Numbers and Descriptions are given to
help locate the parts and quantities required.
2. The Purchase Order must include the name and address of the person or organization
ordering the parts, who should be charged, and if possible, the serial number of the machine
for which the parts are ordered.
3. The Purchase Order must clearly list the quantity of each part, the complete and correct
part number (be sure to include all periods), and the basic name of the part.
4. The Manufacturer reserves the right to substitute parts where applicable.
5. Some parts are unlisted items which are special production items not normally stocked
and are subject to special handling. Request a quotation for such parts before sending a
Purchase Order.
6. The Manufacturer reserves the right to change prices without prior notice.
NOTE:Please refer to The Safety Section in the front of this Manual for the proper
Part Number when ordering Replacement Safety Decals.
For maximum safety and to guarantee optimum product reliability, always use
genuine Servis-Rhino Parts. The use of inferior replacement parts may cause
premature or catastrophic failure which could result in serious injury or death.
Direct any questions regarding parts to:
50 IN BLADE CARRIER ASY (PAN) - PN 02964457................................................................................................................................. 6
50 IN HEAD ASY (PART 1)......................................................................................................................................................................... 7
50 IN HEAD ASY (PART 2)......................................................................................................................................................................... 9
50 IN MOTOR & SPINDLE ASY............................................................................................................................................................... 11
50 IN MOTOR ASY - PARTS - PN 02979881 (PART 1).......................................................................................................................... 13
50 IN MOTOR ASY - PARTS - PN 02979881 (PART 2).......................................................................................................................... 15
50 IN SPINDLE ASY - PN 02960553B...................................................................................................................................................... 17
60 IN BLADE CARRIER ASY (BAR) - PN 02969230.............................................................................................................................. 18
60 IN DOOR CYL ASY - PN 02961480A.................................................................................................................................................. 19
60 IN HEAD ASY - SN 02050 & DOWN................................................................................................................................................... 21
60 IN HEAD ASY - SN 02051 & UP.......................................................................................................................................................... 23
60 IN HEAD SUB-ASY - SN 02050 & DOWN.......................................................................................................................................... 25
60 IN HEAD SUB-ASY - SN 02051 & UP................................................................................................................................................. 27
60 IN MOTOR ASY - PARTS - PN 02979881 - SN 02051 & UP (PART 1)............................................................................................. 29
60 IN MOTOR ASY - PARTS - PN 02979881 - SN 02051 & UP (PART 2)............................................................................................. 31
60 IN SPINDLE ASY - PN 02968859A...................................................................................................................................................... 33
BOOM HOSE SCHEMATIC - 17 FT BOOM ARM.................................................................................................................................. 47
BOOM HOSE SCHEMATIC - 21 FT BOOM ARM.................................................................................................................................. 49
BOOM HOSE SCHEMATIC - 24 FT BOOM ARM.................................................................................................................................. 51
BUZZ BAR - HYD MOTOR PARTS - P/N 02975175............................................................................................................................... 53
BUZZ BAR ASY - 48 IN - GEN 1 (PART 1)............................................................................................................................................. 55
BUZZ BAR ASY - 48 IN - GEN 1 (PART 2)............................................................................................................................................. 57
BUZZ BAR ASY - 48 IN - GEN 1 (PART 3)............................................................................................................................................. 59
BUZZ BAR ASY - 48 IN - GEN 2 (PART 1)............................................................................................................................................. 61
BUZZ BAR ASY - 48 IN - GEN 2 (PART 2)............................................................................................................................................. 63
BUZZ BAR ASY - 69 IN - GEN 1 (PART 1)............................................................................................................................................. 65
BUZZ BAR ASY - 69 IN - GEN 1 (PART 2)............................................................................................................................................. 67
BUZZ BAR ASY - 69 IN - GEN 1 (PART 3)............................................................................................................................................. 69
BUZZ BAR ASY - 69 IN - GEN 2 (PART 1)............................................................................................................................................. 71
BUZZ BAR ASY - 69 IN - GEN 2 (PART 2)............................................................................................................................................. 73
BUZZ BAR ASY - 90 IN - GEN 1 (PART 1)............................................................................................................................................. 75
BUZZ BAR ASY - 90 IN - GEN 1 (PART 2)............................................................................................................................................. 77
BUZZ BAR ASY - 90 IN - GEN 1 (PART 3)............................................................................................................................................. 79
BUZZ BAR ASY - 90 IN - GEN 2 (PART 1)............................................................................................................................................. 81
BUZZ BAR ASY - 90 IN - GEN 2 (PART 2)............................................................................................................................................. 83
BUZZ BAR SPINDLE ASY - SN BB-01219.............................................................................................................................................. 85
DITCHER BLADE HEAD ASY - ROUGH CUT....................................................................................................................................... 91
DITCHER HEAD ASY - (NEW STYLE)................................................................................................................................................... 93
DITCHER HEAD ASY - (OLD STYLE).................................................................................................................................................... 95
DITCHER HEAD DEFLECTOR CYLINDER........................................................................................................................................... 97
HYD LOCK VALVE SOLENOID ASY - PN 02972208A (NEW STYLE)............................................................................................ 133
HYD TANK ASY - PN 02976712 (OCFD) & PN 02976765 (CCLS)...................................................................................................... 135
HYD TANK SUB-ASY - PN 02966767.................................................................................................................................................... 137
KING POST SUB-ASY............................................................................................................................................................................. 141
MOUNTING COMPONENTS - COMMON BOX (PART 1).................................................................................................................. 143
TIMBERCAT - HEAD ASY (PART 1)..................................................................................................................................................... 153
TIMBERCAT - HEAD ASY (PART 2)..................................................................................................................................................... 155
VALVE - PARTS - OPEN & CLOSED CENTER.................................................................................................................................... 157
41029688751HOSE, 68" LONG - W/ ORANGE TIE
42029688761HOSE, 60" LONG - W/ BLUE TIE
43000597007BOLT, FLAT SOCKET HEAD COUNTER SUNK HEAD
44000114002BOLT, HEX HEAD
45029608852RUBBER FLAP, 7-1/8" X 13-1/4"
46000070001BOLT
02969230-BLADE BAR ASY
1000209002NUT
2000232002ROLL PIN
3029692344FLATWASHER
4027615001BLADE SET, MATCHED SET OF 2
5029713871BLADE BAR LEAF, TOP LEAF
6029692321BLADE BAR LEAF, MIDDLE LEAF
7029692331BLADE BAR LEAF, BOTTOM LEAF
8029692352BOLT, LONG BOLT
9029692362BOLT, SHORT BOLT
10027829002BLADE BOLT
11029570892LOCKWASHER
1200003901-LOCKWASHER, 3/4" PL HEAVY
1302964861-BOLT, SOCKET HEAD 3/4"-NC X 4" PL GR8
14029845721BLADE BOLTS, NUTS, ROLLPIN KIT (INCLUDES 2 EACH OF ITEMS 1, 2, & 10)
02961480A-DOOR CYLINDER ASY
15JRC121601LOCKNUT
2333091PISTON
3029758651ROD WLD`MT
4029758661TUBE / BARRELL WLD`MT
5029758671CYLINDER HEAD
6* SEAL KIT1ROD WIPER SEAL (IN ITEM 12)
7* SEAL KIT1ROD SEAL (IN ITEM 12)
8* SEAL KIT1O-RING (IN ITEM 12)
9* SEAL KIT1SEAL (IN ITEM 12)
10* SEAL KIT1PISTON SEAL (IN ITEM 12)
11-----------------O-RING F/ O-RING BOSS FITTING
12029755281SEAL KIT (ITEMS 6 THRU 10)
02968858-ROTARY HEAD ASY, 60" W/BAR CARRIER (NON-SALABLE)
20001110045FLATWASHER
30001580023LOCKNUT
40000700011BOLT
5007551532COTTER PIN
6029705951BOLT
8029715001PLATE, ALAMO S/N
9029717011NUT
100002310010BOLT
11007568751FLAP HOLD DOWN BAR
12007598622SHIELD, DEBRIS DEFLECTOR
13027675001HEX WRENCH, MODIFIED
14029764481PIN, 2-1/2" LONG
15028857001REAR FLAP, 10" HIGH X 63" LONG
16028858001REAR CLAMP BAR
176511021PIN, 2" LONG
18029600182ADAPTER, ELBOW
19029614801CYLINDER ASY, DOOR
20029717201PIN WLD`MT, 11-1/2" LONG
21029717561PIN, 9" LONG
22029719631DOOR WLD`MT
23029677821ROD, HINGE
24029688361PLASTIC TIE, YELLOW
25029688371PLASTIC TIE, YELLOW & WHITE
2602968856160" SQ. HD SUB-ASY.
27029688731DECAL KIT
28029688741HOSE, # 16 W/ RED PLASTIC TIE
29029688751HOSE, # 16 W/ ORANGE PLASTIC TIE
30029688761HOSE, # 16 W/ BLUE PLASTIC TIE
31029688771HOSE, # 4 W/ YELLOW & WHITE PLASTIC TIE
32029688781HOSE, # 4 W/ YELLOW PLASTIC TIE
33029688941PLASTIC TIE, RED
34029688951PLASTIC TIE, BLUE
35029688961PLASTIC TIE, ORANGE
36029717021WASHER, NARROW
3737101512METAL TACK
3899338S2ROLL PIN
39000106002BOLT
481650201COTTER PIN