ATW-GA2929
Scart Style Wireless
Audio/Video Sender
Instruction Manual
Customer Help Link:01422 26 33 13
Website:www.ekey.co.uk
Safety Instructions.
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of un-insulated "angerous
Voltage" within the products enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to the persons.
The exclamation point within an equilateral triangle is intend to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE)
The crossed out "Wheelie bin" is intended to show that this appliance must
not be placed with ordinary household waste at the end of its useful life. To
prevent possible harm to the environment or human health from
uncontrolled waste disposal, please keep separate from other household
waste and recycle it responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where you purchased the
product, or their local government office for details of where and how you
can take this item for environmentally safe re-cycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product must not be mixed with
other commercial wastes for disposal
Care and Maintainance
Keep all its parts and accessories out of the reach of young children.
Keep dry. Precipitation, humidity, and liquids, contain minerals that will corrode
electronic circuits.
Do not handle the mains adaptors with wet hands.
Do not operate in areas of high temperature. This may damage electronic components,
the case and possibly cause frequency drift.
Do not drop, knock, or shake it. Rough handling can break internal circuit boards.
If you wish to clean these items, do not use chemical or petrol based cleaning fluids.
Disconnect the Mains adaptors and clean with a damp cloth.
Operate this product using only the Mains adaptors supplied. These must only be used
on a 220-240V AC 50 Hz supply. Do NOT use alternative supplies.
If the adaptors fail to work, do not attempt to open the case, there are no user
serviceable parts inside. Opening the cases will invalidate your warranty
1
Connections
Product Layout
1
2
Fig. 1
4
3
Receiver/Transmitter
5
Fig. 2
Product Layout
Transmitter/Receiver (Fig. 2)
1. Power ON LED
2. Power ON / OFF switch
3. Scart plug
4. IR Sensor
5. IR Mouse
6. IR Sensor / Mouse socket
7. Power Adapter Socket
8. Channel Selection Switch (Select the channel by sliding the slide switch to the channel
6
7
8
7
6
number you want. Note: Must select the same channel both on transmitter and
receiver)
2
8
Loading...