Akura AOP02STB User Manual

1
Congratulations on purchasing this Digital Terrestrial Free to View Receiver.
Please note that the availability of digital signals depends on the transmitter(s) available in your reception area.
In order to enjoy this product for a long time it is important that you observe the following points when installing and operating the receiver:
This receiver should be plugged into a 230V to 240V AC, 50/60Hz power supply only.
This receiver is intended for the reception of TV picture and sound signals.
Radio feature (blank screen – see Advanced Setup).
The receiver is intended for use in dry rooms. Do not expose the receiver to any moisture. If there is a need to use the receiver in open air, make sure that it is protected against moisture (rain, humidity, splashes etc.).
Do not place any object filled with water such as a vase on the receiver.
Place the receiver on a hard and flat surface and do not place any object over it.
If the receiver is placed in an enclosed unit, make sure that there is at least 10cm of
space around the receiver and the sides of the unit.
During a thunderstorm it is advised to disconnect the unit from the mains and from the aerial to prevent damage from lightning.
Never open the receiver as this will invalidate your guarantee.
Dispose of used batteries at appropriate collection points and not in the normal waste
– this prevents hazardous chemic als from the batteries be ing r eleased into the envi ronment.
If the receiver is not to be used for a long period such as on holiday. Disconnect from the power and aerial system.
Do not connect or modify cables with the receiver plugged in.
No naked flame sources such as lighted candles should be placed on the apparatus.
The mains plug is used as the disconnect device and it shall remain readily operable.
To completely disconnect the power input, the mains plug of the apparatus should be disconnected from the mains (when the mains plug is disconnected the power indicator light will not light up).
Note
Dust will collect on the receiver and can be removed by using a dry clean cloth. Do not spray any substances such as cleaning liquids on the unit.
Safety
Akura manual rev.indd 1 15/8/2005 14:51:40
2
Page
Parts Checklist 3
About Your Receiver 4
Getting Started and Connections 5
Remote Control 7
Basic Operations
First Time Tuning 8
Programme Information 9
Lists and Interactive Services 10
Advanced Operations
Tuning the Receiver 12
Languages and TV Setup 15
Parental Control 16
Timer Programming and Recording 18
Upgrading Your Receiver 19
Technical Information Display 20
Troubleshooting Guide 21
Specifications 22
Contents
Akura manual rev.indd 2 15/8/2005 14:51:40
3
Note
If any item from the checklist is missing please notify your sales agent where you purchased this receiver.
Parts Checklist
Unpack your receiver and make sure that you have all of the items listed below.
Digital Terrestrial Free-to-View Receiver
Remote Control
Scart Cable
Two AAA batteries
Instruction Book
5
4
3
2
1
Akura manual rev.indd 3 15/8/2005 14:51:51
4
About Your Receiver
Front
Rear
Akura manual rev.indd 4 15/8/2005 14:51:53
5
Getting Started and Connections
Operation of Receiver and Tv only.
In this connection mode, your DTR box is connected directly to your TV Scart socket. When you turn on the DTR box it should automatically switch your Tv to A1. With older Tv’s you may have to select AV manually.
Operation of Receiver, VCR and Tv ( Tv single Scart socket ).
In this connection mode, you may only view the DTR box via the VCR. To view the DTR box select AV on your Tv to monitor the VCR and set your VCR input to AV. To record a programme, just set the Timer or Immediate record. With this connection you may only view, non digital received signals on your
Tv whilst recording a digital programme. To playback a recorded programme, press play and the VCR should be automatically viewed on the TV. (Note. :- variations in technology may mean manual selection of AV may be necessary). You may not record a Non digital programme, whilst watching a Digital programme.
Operation of Receiver, VCR and Tv (Tv Dual Scart socket).
In this connecti o n mod e , you may watch a Di git al programme on AV1, whilst recording a Non Digital programme on the VCR. (Note. :- variations in technology may mean manual selection of AV may be necessary). If you need to connect other boxes such as a DVD player, connect the DTR box as Fig 2 and your DVD player to AV1 on the Tv.
1
2
3
Akura manual rev.indd 5 15/8/2005 14:51:56
6
Place batteries into remote control as shown.
Plug your receiver into the mains supply.
Note
Always disconnect the receiver from the mains supply before you connect it to any other equipment.
4
5
To mains supply
Akura manual rev.indd 6 15/8/2005 14:52:00
7
Remote Control
Remote Buttons
Button Function
Standby – switches the receiver in/out of standby mode
[Guide] – Displays TV Guide
[Text] – Enters Teletext mode
Mute – turns volume on/off
[Subtitle] – displays subt itl e menu if available
[Menu] – goes to main menu
Number Keys – used where numbers can be entered
[R e d ] – for Tel e text and in t eracti v e services
[Green] – for Teletext and interactive services
[Yellow] – for Teletext and interactive services
[B lue] – for Teletext and inte racti ve services
[Exit] – exits the menu mode
[i] – calls upon the information banner
Na vigation buttons – use d to selec t vari ous functio ns.
[OK] – confirms selections made
Channel – navigates through channel and favourites
Switches between TV and Radio.
The following keys are for PPR only and do not function with this STB.
They do not function on this set top box.
Akura manual rev.indd 7 15/8/2005 14:52:01
Loading...
+ 16 hidden pages