A.J. Antunes & Co WD-35A 9400156 User Manual

MANUFACTURING

NUMBERS:

9400 1 3 0 9400 1 3 2 9400 1 3 4 9400 1 3 6 9400 1 4 0 9400 1 4 2 9400 1 4 4 9400 1 4 6 9400 1 5 0 9400 1 5 2 9400 1 5 4 9400 1 5 6

WARMER DRAWER

(Without Water Tray)

P/N 1010889 Rev. A 04/05

Models WD-20, WD21A, & WD-35A

WD-20 Shown

Owner’s Manual

WARMER DRAWER

TABLE OF CONTENTS

Owner Information .....................................................

General ......................................................................2

Warranty Information .................................................2

Service/Technical Assistance ....................................3

Important Safety Information ....................................3

Specifications .............................................................5

Electrical Ratings .......................................................5

Capacity .....................................................................5

Shipping Weight ........................................................5

Electrical Cord & Plug Configurations .......................5

Dimensions ................................................................5

Installation ...................................................................6

Unpacking ..................................................................6

OWNER INFORMATION

Equipment Setup .......................................................

Operation .....................................................................7

Operating Instructions ...............................................7

Hi-Limit Reset ............................................................7

Maintenance ................................................................ 8

Cleaning ....................................................................8

Replacing Components .............................................8

Troubleshooting .........................................................9

Wiring Diagram .........................................................10

Replacement Parts – WD-20 .................................... 11

Replacement Parts – WD-21A & 35A ......................13

Notes..........................................................................15

Limited Warranty ......................................Back Cover

General

The Roundup Warmer Drawer warms up bread products. Easily adjustable controls allow you to tailor the temperature required for your bread product.

The Warmer Drawers are designed to be used sepa rately, stacked or to fit under the Roundup Hot Dog Corrals.

This manual provides the safety, installation and oper ating procedures for the Warmer Drawer. We recom mend that all information contained in this manual be read prior to installing and operating the unit.

Your Warmer Drawer is manufactured from the finest materials available and is assembled to Roundup’s strict quality standards. This unit has been tested at the factory to ensure dependable trouble-free opera tion.

Warranty Information

Please read the full text of the Limited Warranty in this manual.

If the unit arrives damaged, contact the carrier imme

diately and file a damage claim with them. Save all packing materials when filing a claim. Freight damage claims are the responsibility of the purchaser and not covered under warranty.

The warranty does not extend to:

• Damages caused in shipment or damage as result of improper use.

• Installation of electrical service.

• Normal maintenance as outlined in this manual.

• Malfunction resulting from improper maintenance.

• Damage caused by abuse or careless handling.

• Damage from moisture into electrical components

• Damage from tampering with, removal of, or changing any preset control or safety device.

are

IMPORTANT! Keep these instructions for future reference.

If the unit changes ownership, be sure this manual accompanies the equipment.

P/N 1010889 Rev. A 04/05

OWNER INFORMATION (continued)

WARMER DRAWER

Service/Technical Assistance

If you experience any problems with the installation or operation of your unit, contact your local Roundup Authorized Service Agency.

Fill in the information below and have it handy when calling your authorized service agency for assistance. The serial number is on the specification plate located on the unit.

Purchased From:

Date of Purchase:

Model No.:

Serial No.:

Mfg. No.:

Refer to the service agency directory included with your unit.

IMPORTANT SAFETY INFORMATION

Authorized Service Agency

Name:

Phone No.:

Address:

Use only genuine Roundup replacement parts in this unit. Use of replacement parts other than those sup plied by the manufacturer will void the warranty. Your Authorized Service Agency has been factory trained and has a complete supply of parts for this unit.

You may also contact the factory at you have trouble locating your local authorized service agency.

1-877-392-7854 if

Throughout this manual, you will find the following safety words and symbols that signify important safety issues with regards to operating or maintaining the equipment.

WARNING

GENERAL WARNING. Indicates information important to the proper operation of the equipment. Failure to observe may result in damage to the equipment and/or severe bodily injury or death.

CAUTION

GENERAL CAUTION. Indicates information important to the proper operation of the equipment. Failure to observe may result in damage to the equipment.

ELECTRICAL WARNING. Indicates information relating to possible shock hazard. Failure to observe may result in damage to the equipment and/or severe bodily injury or death.

HOT SURFACE WARNING. Indicates information important to the handling of equip ment and parts. Failure to observe caution could result in personal injury.

WARNING

P/N 1010889 Rev. A 04/05

WARMER DRAWER

IMPORTANT SAFETY INFORMATION (continued)

In addition to the warnings and cautions in this manual, use the following guidelines for safe operation of the unit.

• Read all instructions before using equipment.

• For your safety, the equipment is furnished with a properly grounded cord connector. Do not attempt to defeat the grounded connector.

• Install or locate the equipment only for its intend ed use as described in this manual. Do not use corrosive chemicals in this equipment.

• Do not operate this equipment if it has a dam aged cord or plug, if it is not working properly, or if it has been damaged or dropped.

• This equipment should be serviced by qualified personnel only. Contact the nearest Roundup authorized service facility for repair.

• Do not block or cover any openings on the unit.

• Do not immerse cord or plug in water.

• Keep cord away from heated surfaces.

• Do not allow cord to hang over edge of table or counter.

The following warnings and cautions appear throughout this manual and should be carefully observed.

• Turn the unit off, disconnect the power source and allow unit to cool down before performing any service or maintenance on the unit.

• The procedures in this chapter may include the use of chemical products. These chemi cal products will be highlighted with bold face letters followed by the abbreviated HCS (Hazard Communication Standard). See Hazard Communication Standard manual for the appropriated Material Safety Data Sheets (MSDS).

• The unit should be grounded according to local electrical codes to prevent the possibil ity of electrical shock. It requires a grounded receptacle with separate electrical lines, pro tected by fuses or circuit breaker of the prop er rating.

• All electrical connections must be in accor dance with local electrical codes and any other applicable codes.

• WARNING ELECTRICAL SHOCK HAZARD. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

- Electrical ground is required on this appli ance.

- Do not modify the power supply cord plug. If it does not fit the outlet, have a proper outlet installed by a qualified electrician.

- Do not use an extension cord with this appliance.

- Check with a qualified electrician if you are in doubt as to whether the appliance is properly grounded.

WARNING

ELECTRICAL SHOCK HAZARD. FAILURE TO

FOLLOW THE INSTRUCTIONS IN THIS MANUAL

COULD RESULT IN SERIOUS INJURY OR DEATH.

• Electrical ground is required on this appliance.

• Do not modify the power supply cord plug. If it does not fit the outlet, have a proper outlet installed by a qualified electrician.

• Do not use an extension cord with this appli ance.

• Check with a qualified electrician if you are in doubt as to whether the appliance is properly grounded.

P/N 1010889 Rev. A 04/05

POWER

HEATER

THERMOSTAT

OFF

SPECIFICATIONS

WHT

BLK

GRN

WARMER DRAWER

Electrical Ratings

Model & Mfg. No Volts Watts Amps Hertz

WD-20-CF 9400130

WD-20-HC 9400132

WD-20-CF 9400134

WD-20-HG 9400136

WD-21A-CF 9400140

WD-21A-HG 9400142

WD-21A-HC 9400144

WD-21A-CF 9400146

WD-35A-CF 9400150

WD-35A-HG 9400152

WD-35A-HC 9400154

WD-35A-CF 9400156

120 500 4.2 50/60

230 500 2.2 50/60

120 1000 8.3 50/60

230 1100 4.8 50/60

120 1400 11.7 50/60

230 1530 6.7 50/60

Electrical Cord & Plug Configurations

Letter Code*

(H)C** CEE 7/7 16 Amp, 250

(C)F*** 5-15P, 15 Amp, 250

(H)G** BS-1365 Fused,

* Used in model designation * * Indicates that the plug comes with a Harmonized Cord ** * Indicates that the plug comes with a Commercial Cord

Description Configuration

Harmonized Cord

VAC (Assembly Only)

VAC, Non-Locking

(Assembly Only)

Permaplug, 16 Amp,

250 VAC (Assembly

Only)

Dimensions

CAUTION

All electrical connections must be in accordance with local electrical codes and any other applicable codes.

Capacity

WD-20 Holds up to 40 standard hot dog buns.

WD-21A One 4” (100 mm) deep full size steam table

pan. Holds 40-50 standard hot dog buns.

WD-35A Two 4” (100 mm) deep 2/3 size steam table

pan. Holds 50-60 standard hot dog buns.

Shipping Weight

WD-20 58 lbs. (27 kilos)

WD-21A 56 lbs. (26 kilos)

WD-35A 72 lbs. (33 kilos)

P/N 1010889 Rev. A 04/05

Model Width (A) Depth (B) Height (C)

WD-20 18-3/4”

(476 mm)

WD-21A 22-3/16”

(564 mm)

WD-35A 32-1/2”

(826 mm)

21”

(533 mm)

17”

(432 mm)

17”

(432 mm)

10-5/8”

(270 mm)

10-3/8”

(264 mm)

10-3/8”

(264 mm)

+ 11 hidden pages