Corvid HB-R
Expand your application’s reach with HDBaseT and the Corvid HB-R. Using a single Cat 5e/6 cable as
input, the Corvid HB-R receives up to 4K/60p video (8-bit 4:2:0) and 8-channel embedded audio.
It also delivers bidirectional VISCA/RS-232 control plus power up to 10W, and Corvid HB-R provides
full-time looped HDMI 1.4b output of the signal received via the HDBaseT input.
These features also make the Corvid HB-R the perfect desktop and server companion to AJA’s
RovoCam, the UltraHD HDBaseT camera.
https://www.aja.com/products/corvid-hb-r
Video Formats
(4K) 4096 x 2160p 23.98, 24, 25, 29.97, 30
(4K) 4096 x 2160p 50, 59.94, 60 (8-bit 4:2:0)
(UltraHD) 3840 x 2160p 23.98, 24, 25, 29.97, 30
(UltraHD) 3840 x 2160p 50, 59.94, 60 (8-bit 4:2:0)
(2K) 2048 x 1080p 23.98, 24, 25, 29.97, 30
(2K) 2048 x 1080p 50, 59.94, 60
(2K) 2048 x 1080PsF 23.98, 24, 25, 29.97, 30
(HD) 1080p 23.98, 24, 25, 29.97, 30
(HD) 1080p 50, 59.94, 60
(HD) 1080PsF 23.98, 24, 25, 29.97, 30
(HD) 1080i 50, 59.94, 60
(HD) 720p 50, 59.94, 60
(SD) 525i 59.94
(SD) 625i 50
Active looped output of HDMI received on HDBaseT input
No EDID interface
No support for HDCP encrypted video
Video out electronic copy of video negotiated at CORVID-HB-R HDMI
receiver input
Audio Input Digital
Audio over HDBaseT
8-Channels embedded audio
2-Channels discrete RovoCam microphone audio
Audio Output Digital
8-Channel HDMI embedded 48 kHz 24-bit
Power Support
Video Input Digital
HDMI v1.4b over HDBaseT
Video over HDBaseT
24/30/36-bits/pixel, RGB or YUV
300 MHz pixel clock maximum
3.4 Gb TMDS data rate maximum per lane providing an aggregate
10.2 Gbps total bandwidth
UltraHD/2K/HD/SD
No support for HDCP encrypted video
Video Output Digital
HDMI v1.4b Output
Power over HDBaseT
Support for up to 10W output maximum via IEEE 802.3AF interface
RS-232
Serial port over HDBaseT
115200 Baud interface intended for VISCA camera control
USB
USB over HDBaseT
USB Host intended for camera firmware updates
$995 US MSRP
Corvid HB-R - Spec Sheet
08/6/2019 Page 1 of 2
Interface
4-lane PCIe 2.0
Size (w x d x h)
Conforms to PCIe Card Electromechanical Specification Rev 1.0A Low
Profile Add-in Card
Without bracket: 6.7” x 2.7” x 0.7” (170.18 x 68.58 x 17.78 mm), bracket
is standard full height PCIe card size
Power
10-20V, 10W typical for card only, 16W typical when powering
RovoCam, 18W max
Environment
Safe Operating Temperature: 0 to 40 C (32 to 104 F)
Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
Operating Relative Humidity: 10-90% noncondensing
Operating Altitude: <3,000 meters (<10,000 feet)
Corvid HB-R - Spec Sheet
08/6/2019 Page 2 of 2